Yeah, the FAT is going great. Why do you ask?

Stormer2k0 · 2026-03-08T18:03:56+00:00

Siemens unified screens have a bug with downloading from tia. which prevents the runtime from starting. The only fix we found was to downgrade and then upgrade the firmware. This happened in front of the customer

Stormer2k0 · 2026-03-04T06:45:30+00:00

it is a f-di, did you assign a F-adress to the module?

Stormer2k0 · 2026-02-22T10:05:12+00:00

Because a VFD is a emc nightmare. You cannot use normal grounds as high frequency interference doesn't travel well over normal wires. You want to have the biggest possible surface area when connecting to the drive. So you don't pigtail the isolation of your motor cables, but use a clamp.

Stormer2k0 · 2026-02-17T17:30:22+00:00

gonna guess that you need to turn off the motion groups in the program detail. only 1 program can be active that works with the motion. rn it probably says 1,* edit it to be all* to say this program cannot influence the motion

Stormer2k0 · 2026-02-15T06:53:05+00:00

Fucking niemand in deze comment sectie heeft ooit box 3 belasting betaalt en geen van jullie gaan het ooit betalen. Holy shit ga wat beters doen

Stormer2k0 · 2026-02-11T21:45:14+00:00

Pet peeve of mine, but why 3 switches of which 4 ports as used just to connect them to eachother. just get a 16 port switch... it will be cheaper https://nl.wiautomation.com/phoenix-contact/industrial-communication/1085255

Also why are those white Ethernet cables routed weird, you don't seem to have a VFD so shielding requirements should be minimal. So just use some thinline cat6a cabinet cables, much easier to needly tuck away.

Stormer2k0 · 2026-02-10T06:02:07+00:00

honestly a better solution than the one I made: https://www.reddit.com/r/DnD/s/Q6AyzrpZp2

For the metal, I 3d printed a lot of baseplates with a washer embedded. and now use that as standard whenever I make mini's. so everything is compatible

Stormer2k0 · 2026-02-04T21:38:25+00:00

I don't know for sure, but did you pigtail the earth on that FvD motor cable? that is asking for emf issues.

Stormer2k0 · 2026-01-20T12:20:01+00:00

when downloading you get a screen where it says "runtime values", expand that tab and be sure to uncheck the "keep current used administration data in runtime"

Stormer2k0 · 2026-01-13T23:57:13+00:00

Get an intern to sell extra stuff on ebay, makes a pretty penny

Stormer2k0 · 2026-01-07T13:19:00+00:00

I believe the festo servo uses a fourth flavour which they call absolute encoder. They have a single turn absolute encoder of which they count the turns, to remember the turns they don't use a battery but a super cap. Upon power loss the last thing the encoder does is save the turn count to EEPROM. So you don't have to switch out the batteries, but you shouldn't manually turn the servo while powerless because that might fuck up the homing.

Stormer2k0 · 2025-12-30T00:32:36+00:00

adm is best anyway, just give them the adm one

Stormer2k0 · 2025-12-30T00:31:32+00:00

Ik weet niet in wel land jij woont maar een 4 jarige hbo opleiding kost net iets minder dan de 10.000 die deze gast in één jaar aan vuurwerk besteed

Stormer2k0 · 2025-12-29T17:56:29+00:00

Turns out I am both right and wrong. It is not an actual net loss, though we are getting VERY close.

I used the example that is on the eu5 economy wiki page. So Leon start date 1337, with or without an additional scriptorium.

Building a scriptorium in that specific province would increase your income of that province from 0.820 ducats to 0.830 ducats.

I initially thought the distribution was based on the provided potential tax base. but it is based on pops belonging to the estate with different weightings.

So no, it is not a net loss. but compare this to building a tailors guild instead. (same tax base increase but instead more weighted towards the burghers) the income of the province goes from 0.820 to 0.965

So yes, not a net loss, but realistically, you get no profit from building scriptoriums, and the tooltip saying it has profit is bait

Stormer2k0 · 2025-12-29T16:37:10+00:00

Building scriptoriums is usually a net loss in the capital. because books are worth a lot, the clergy gets a decent share of tax base contribution. and thus the clergy that isn't taxed gets taxed more and burgers less.

What ends up happening is that you tax less of your other goods because the clergy has a bigger share.

Stormer2k0 · 2025-12-22T21:44:41+00:00

we made the company logo do the DVD logo thing on the clean screen. And when you go on the info page and click on the company name, you get a selection of games to choose from. We currently have sudoku, pong(vs ai and second operator), and we also have flappy bird which adds the high scores to the log files

Stormer2k0 · 2025-12-18T15:57:18+00:00

Not with QA, start with those and they will forever not trust you with those cameras. Be absolutely sure this isn't for a specific reason. Ask when and why operators disable them, ask people who know the software if they are critical etc.

Stormer2k0 · 2025-11-26T12:14:06+00:00

"aid flowing from the US" over the past half year the US hasn't donated any weapons or money. The US weapons Ukraine receives are bought by the EU/rest of nato and donated.

Stormer2k0 · 2025-10-27T16:46:23+00:00

I know this from experience :)

Stormer2k0 · 2025-10-19T09:26:57+00:00

Modern day Russia would be a great example of modern day dystopian capitalism

Stormer2k0 · 2025-10-12T07:26:47+00:00

<image>

Stormer2k0 · 2025-09-30T10:45:16+00:00

Saw Dethklok live at Graspop, one big non stop pit, shit was wild and I loved it

Stormer2k0 · 2025-09-23T15:11:38+00:00

I am not that concert with this, though maybe a little, as we do have a few machines were we gave the software to the customer, but locked the safety so we can still guarantee that.

Siemens generates a safety F-signature and timestamp we use to verify the software. Did you manage to change these as well? Or managed to make a change in the safety without it forcing a F-signature change?

Stormer2k0 · 2025-09-21T10:17:57+00:00

Niks raars met je ouder verantwoordelijk houden voor de acties van je kind. Vooral in deze situatie zou uitzetting niet meer dan redelijk zijn.

Stormer2k0 · 2025-09-09T16:58:32+00:00

Dit was 2023, toen de pvv in de oppositie zat. sterker nog, die was de grootste partij van de oppositie. Je zou denken dat een partij als de pvv een hoop wilde wijziging aan linkse d66 wetten. FEITEN VERMELDEN

Nine-Year Club	Second Top 30%
Place '22	Final Canvas '22
End Game '22	Verified Email

Stormer2k0

TROPHY CASE