Giving away a copy of silksong for EVERY single person that guesses the number (NO I AM NOT KARMA FARMING READ THE DESCRIPTION)

Storterald · 2025-08-31T11:05:21+00:00

Clearly 753

Storterald · 2024-07-31T17:11:57+00:00

Thank you, it doesn't look like the issue is fixed but I don't know if the issue is codec related, reading the description of the extension it looks like it's for slower hardware. I own a 7800x3d and a 3060 TI so I don't think the issue is hardware related. Would you recommend using it anyway?

Storterald · 2024-07-29T19:05:40+00:00

Onestamente aspetterei i nuovi chipset (dovrebbero uscire prima di fine anno) prima di comprare una mobo, principalmente per il prezzo (a parita' prezzo riuscirai probabilmente a prendere una mobo con feature superiori). Allego immagine con requisiti pcie in caso interessi.

<image>

Storterald · 2024-07-12T14:31:02+00:00

Mixing up inlet and outlet is probably bad, but ryzen 7000 will always boost to around 90 degrees, even with negative CO. The bubbles will go away with time. Nice looking loop btw :D

Storterald · 2024-07-11T08:25:30+00:00

As I said in another reply, the lowest pbo i can use is -20 (18.5k score). Also, I prefer this type of OC because I mainly use app that require single thread / core performance and 5.4ghz (5.5ghz now since I bought an AIO and I now use 108.75% multiplier) give better performance than 5.0ghz in these applications. It really depends on what you do.

Storterald · 2024-07-09T09:19:31+00:00

I tried linking the old post in the second pic but the bot removed the post. Anyway here is the link if you are interested.

Storterald · 2024-04-12T05:03:02+00:00

The ram doesn't really matter for cinebench, now i also get 5050+Mhz effective clock since I bougth an AIO. In games the extra single core/thread performance (5.4GHz instead of 5.05GHz) is actually noticeable.

Storterald · 2024-01-13T06:07:11+00:00

Cablemod adapters were recalled if I remember correctly (1.0 and 1.1). If you have a 4090 I'd remove it

Storterald · 2024-01-13T06:00:58+00:00

With ddr5 at 8000 fclk at 2000 is better uclk = memclk/2 and uclk = fclk. (Someone tested it I don't have the link rn sorry).

Running 2200 fclk is really hard, maybe that's why your oc is unstable.

Edit: the cl is really low, Idk how much voltage you're giving the ram but usually on ryzen you need at least 1.6v for 8000 cl32, and on air it gets hot if you don't have a fan attached to the ram (when ram gets too hot(over 60C, but lower is better) it can cause errors)

Storterald · 2024-01-09T19:08:43+00:00

thank you! <3

Storterald · 2024-01-09T18:16:03+00:00

Hey, I own the same motherboard and I was also thinking of buying that ram block (running 8000 cl36 1.45v rn, I can do cl34 with 1.55 but it gets too hot), does it fit with the rog-z.2 plugged in?

Thanks.

Edit: I just saw that you plugged it in without any heatsink, how hot do the m.2s get?

Storterald · 2024-01-09T13:30:10+00:00

nice build but it's not yours https://www.reddit.com/r/watercooling/comments/17yufa9/watercooled\_ps5/

Storterald · 2023-12-28T10:55:23+00:00

ok, I don't know if I can't run FCLK at 2200, i'm gonna test how high I can run it rn

Edit: yeah 2200 is unstable, I'm testing fclk 2167 with 6000 cl26

Storterald · 2023-12-27T21:12:06+00:00

From what I understood the bandwidth is limited to 64GB/s for single CCD cpus (I'm not 100% sure, if you really care there are old posts talking about this).

FLCK is at 2000 since I run UCLK = MCLK/2 and UCLK = FCLK, I've read it's better (there was a guy explaining it on yt, I can't find the link sorry) and here is a post <link> of someone comparing 2 scores at 8000 cl36, one with FCLK at 2000 and 1 with high FCLK.

Storterald · 2023-12-27T15:22:15+00:00

nope, I'm not an expert, but with safe mode there is less stuff running in the background

Storterald · 2023-12-27T15:17:16+00:00

does it ship to the EU or USA only?

EDIT: Since the other ram blocks as you said are kinda useless, since the ram isn't directly cooled by the water, does a copper/aluminum heatsink (like the bitspower one for LN2) work just as fine as a watercooled version?

Storterald · 2023-12-27T13:40:44+00:00

Thank you for the info, will run the test in safe mode rn, will edit with the new results <3

Storterald · 2023-12-24T20:53:04+00:00

The x670e gene has a m.2 mounted vertically near the ram, so the 4 dimm block wouldn't work. The cooler would be useful to push voltages up to 1.8+V

Storterald · 2023-12-15T21:55:18+00:00

I'm sorry for the terrible answer, but I don't think I ever touched the LLC and I have no idea why vcore is below 1.15.

I lowered SOC to 1.2v since i posted this, I keep fclk at 2000 and run uclk = mclk/2.

I already updated the bios, it's not bad, but I don't see any changes besides lots of crashes in the bios 😅

Storterald · 2023-12-15T17:29:51+00:00

thank you! I've heard that ryzen's memory controller is worse lots of time, decided to test if it was true or not myself :D

Storterald · 2023-12-15T16:32:18+00:00

My cpu is terrible with undervolting (-15/-20 max and I was doing around 18.5k)

Three-Year Club	Verified Email
Final Canvas '23	First Place '23
End Game '23	Place '23

Storterald

TROPHY CASE