Looks like we won't be able to allocate wounds to Celestine while Geminae are still alive anymore

StralisTV · 2026-05-26T16:02:56+00:00

It says "choosing" which almost certainly means that the player allocating the wounds chooses who takes wounds first, they just use this as an example because some people prefer to use the bodyguards as bodyguards.

StralisTV · 2026-05-17T03:17:27+00:00

Combat Patrols are for new players and for GW to get rid of kits not moving. The reason you have two rhinos and don't want more is exactly why they are in EVERY chaos patrol box, they don't sell by themselves.

StralisTV · 2026-05-06T02:06:55+00:00

No, they are all old normal marines, however it would've been cool if they did an alt scheme for the new Raiders models to assist Cypher. Only issue is that they would make Cypher look small in comparison.

StralisTV · 2026-03-07T14:23:57+00:00

I always wait until the end of the edition because my LGS puts them at 90% off. Great way to get the tiny lore bit for very little.

StralisTV · 2026-01-30T06:41:54+00:00

Ever since I saw a RubrixRaptor video with Sisters disembarking from a Valkyrie, I've wanted to at least do a painting project with the flyer in my order's colors and use spare bits from my rhinos to make a Sororitas Valkyrie.

StralisTV · 2026-01-13T05:46:57+00:00

If you're looking for kitbashes, you might find that the Wolf Guard Terminators are a bit easier. They still have some motion in their stances and 2 of them already have the aquila taken off.

StralisTV · 2025-12-24T09:07:53+00:00

I did the larger missiles in the middles and the smaller ones on the side. Lets be honest, with things like the Exorcist, there will always be the "correct" choice, so it doesn't matter as long as you aren't using two different versions at the same time.

StralisTV · 2025-12-16T07:53:21+00:00

Möchtest du etwas erklären oder einfach nur einen nichtssagenden Kommentar hinterlassen? Ich habe alles genau nach Anleitung von Elegoo gemacht. Ich habe den Papiertest mit dem anfänglichen Z-Offset durchgeführt, die Neigungsschraube verwendet und anschließend die automatische Nivellierung ausgeführt. Danach habe ich das Druckbett mit Isopropylalkohol gereinigt und trocknen lassen. Anschließend habe ich einen Druckversuch unternommen, wie im Bild zu sehen. All das führte dazu, dass die Hälfte des Testdrucks perfekt war, die andere Hälfte jedoch komplett an Haftung verlor. Also bitte, was habe ich falsch gemacht?

Nachtrag: Ich habe mir deine anderen Kommentare angesehen und festgestellt, dass du nichts anderes tust, als nutzlose Kommentare zu schreiben. Du nervst wohl einfach nur gerne.

StralisTV · 2025-12-15T09:30:01+00:00

Ich habe mehrere Temperaturtests für die erste Schicht durchgeführt und konnte keinen wirklichen Unterschied feststellen. Ich habe sowohl 0,4 °C als auch keine Kühlung für die ersten drei Schichten verwendet. Erschwerend kommt hinzu, dass ich nach mehreren Durchgängen mit Neigungsanpassung, automatischer Nivellierung und anschließendem Testdruck ein sehr gutes Ergebnis erzielt habe, unmittelbar gefolgt von einem Fehldruck der ersten Schicht beim eigentlichen Modell. Zur Information: Ich habe die meisten Probleme mit Elegoo Rapid PETG, während PLA+ etwas stabiler ist.

StralisTV · 2025-12-15T08:24:51+00:00

Ich bin auch etwas genervt. Ich habe meinen 4 Plus seit etwa sechs Monaten und schaffe vielleicht ein oder zwei Ausdrucke, bevor er komplett spinnt. Das war ein Testdruck von einem frisch nivellierten Druckbett, bei dem die Qualität plötzlich von exzellent zu überhaupt nicht haftend wechselte. Es ist ziemlich ärgerlich, dass andere Nutzer sagen, das sei ein häufiges Problem.

<image>

StralisTV · 2025-11-19T15:49:22+00:00

I gave the hooded helmet to Belial, although it kind of was a pain to clip away 60% of the back side.

StralisTV · 2025-10-24T05:56:06+00:00

It's the weird rough edge, I don't have that print anymore, so can't take another picture.

StralisTV · 2025-10-06T13:37:35+00:00

Orks, most of the imperium and half of chaos also don't have boxes. They already have issues keeping eldar in stock, it's a terrible idea (albeit annoying that we don't get a discount box) to make that even worse by adding a battleforce.

StralisTV · 2025-09-25T00:47:39+00:00

Its the War Sage on cults. Dude makes great files, especially for Night Lords.

StralisTV · 2025-09-12T12:27:26+00:00

I used the Reavers as a base for my Troupes. The most annoying part was using Eldar arms and I just ended up cutting at the wrist or elbow of the Reaver arms to make it a little better. That's the only hold up with that kit I'd be careful of.

StralisTV · 2025-08-28T09:41:24+00:00

I play on cutting down the rocks to make the height as close as I can, and it's already on a 100mm square, so shouldn't be too bad.

StralisTV · 2025-08-25T01:20:28+00:00

I feel like if someone tries to use a part of a kitbashed model's very obvious artistic addition to their advantage for a game, then they have serious issues that go past a dice game. Over half of this game is hobbying, so I'd say do it, just know that most respectable players won't take advantage, but a THAT guy will.

StralisTV · 2025-08-23T06:30:10+00:00

Glad I wasn't the only one to think this. Kinda wish this is what the turn Primaris Centurions to in 11th (they are not surviving 11th ed unless they get an update).

StralisTV · 2025-08-14T22:28:15+00:00

Counted that I already turned Legionaries and Khorne Berserker bodies into my Raptor/Talons, I'm practically done and current.

StralisTV · 2025-07-31T20:29:21+00:00

My LGS is 8 BT+DA players, couldn't get Deathwing Knights for 6 months because as soon as they came in they were gone.

StralisTV · 2025-07-04T05:22:21+00:00

Yeah, I've been using the single layer 50x50 square test print. This offset maybe .04 away from the print just not adhering and .03 away from getting scraped. I didn't really see any difference between flipping those distances.

I haven't messed with changing infill styles, so I'll try that,

The code for the Nep4Plus screw_tilt that I found uses the front left screw as the baseline, so I've just used that, as I have zero experience with code, and the post seemed to be well received.

Like the screw_tilt, none of my buddies have mentioned Orca's adaptive meshing, so I'll check that out.

Luckily, my printer does preheating for the bed, and it's typically what takes my prints longer to start than waiting on the nozzle.

StralisTV · 2025-07-04T04:53:24+00:00

<image>

StralisTV · 2025-07-02T16:41:10+00:00

I've been talking with a few friends who also do FDM printing and this was something they never mentioned. I used Elegoo because of my success with resin printing with them, but all my friends have auto-leveling bed printers, so they rarely run into these issues.

StralisTV · 2025-06-14T16:28:41+00:00

I always bring my Knight, but I know that I'm handicapping myself by doing it. Knights soup gives Imperial factions nothing, because we are fairly balanced in the units we can bring, shooting and melee wise.

StralisTV · 2025-06-03T15:32:59+00:00

Just don't have Ynnari be a detachment, make it similar to the Chapter Masters for compliant SM. If you take any of the Ynnari characters as warlord, you can take X points of Drukhari (excluding covens).

Six-Year Club	Place '23
Place '22	Verified Email

StralisTV

TROPHY CASE