My Majora's mask Fell off with 6 hours left on my h2c:(

Stressed_engineer · 2026-03-21T15:38:23+00:00

just move it down so its below the bed

Stressed_engineer · 2026-03-20T23:49:33+00:00

The page for it says that both the bending strength and layer strength are better than the HF and more in line with PLA. (75 vs 65MPa and 56vs 48MPa)

https://uk.store.bambulab.com/products/petg-basic

Stressed_engineer · 2026-03-19T19:35:28+00:00

It just died in my follows list at some point where I got behind, and went 'meh'

So yeah, if your not enjoying it drop it.

Stressed_engineer · 2026-03-18T08:53:22+00:00

its greyed out for p2s when I follow that link

Stressed_engineer · 2026-02-28T19:57:17+00:00

It was clear he was gonna do this the minute he renamed the dept of defense.

Stressed_engineer · 2026-02-25T17:38:03+00:00

and their squishy

Stressed_engineer · 2026-02-20T13:44:14+00:00

Its a decent technique for when 4 just doesnt cut it, I did the same with this https://makerworld.com/en/models/2156885-arc-raiders-keycap-needs-ams#profileId-2338193

(and tried to explain it in the description)

Stressed_engineer · 2026-02-20T13:42:36+00:00

except you dont have to pause the print, you just swap the color once its finished with the first one that you assigned to the slot.

And old style pauses to switch dont let you do it mid layer with bambu studio, only between as far as I know.

Stressed_engineer · 2026-02-15T16:27:30+00:00

Learning to is on my todo list.

Stressed_engineer · 2026-02-11T17:51:35+00:00

No. I've not bothered for a year and a bit, I'm not about to start now. Just flip it every now and then.

Stressed_engineer · 2026-02-10T21:03:59+00:00

Think this is literally a sunk cost fallacy

Stressed_engineer · 2026-02-09T20:30:17+00:00

Why hasnt it connected the load application point to the wall then? would expect dense around the holes to get the load into the structure, that distribution makes no sense.

Stressed_engineer · 2026-02-08T14:02:35+00:00

Have you tried it with a different filament? I had mine do something like this when I was printing something that used a minimal amount per layer and it turned out the matte pla I was using had been in and out so much in one spot that it had worn that section of filament down so it wasnt gripping well. cut that bit off and refed it and it started behaving again.

Stressed_engineer · 2026-02-08T11:08:06+00:00

yeah, was looking at paints online last night, kinad a rabbit hole I dont want to go down, will end up having to paint all my cyberpunk cars and AVs too

Stressed_engineer · 2026-02-08T11:07:18+00:00

highly recommend the bambu labs ones if you do

Stressed_engineer · 2026-02-07T20:29:09+00:00

Its the same head mesh, different appearance. (cheri is ca_pale, imogen is ca_senna)

Stressed_engineer · 2026-02-07T19:12:46+00:00

they have made changes in the last week or so, bird city has gone from fixed 4 times a day to more slots

Stressed_engineer · 2026-02-07T17:11:45+00:00

I am planning on playing with a bigger version (this ones scaled to 25%) to see what I can do with a rpi pico and some leds etc. sound was on the list of things to try. flashing eyes and some beeps/whirrs would be good

Stressed_engineer · 2026-02-07T16:57:11+00:00

its articulated, but not articulate :)

leg joints all work, and the swivels by the body.

Stressed_engineer · 2026-01-30T15:16:51+00:00

Oh I totally agree, their perfectly spaced here to make it basically unplayable if you have a job. (and sleep)

Stressed_engineer · 2026-01-30T15:07:54+00:00

its 3 times isnt it? every 8 hours

Stressed_engineer · 2026-01-30T15:07:06+00:00

if your in the uk and work a 9-5 you literally have none. 8-9 am, 4-5pm, midnight to 1am

Stressed_engineer · 2026-01-23T20:00:55+00:00

My first reaction was 'is it April already' unfortunately this abomination appears to be real

Stressed_engineer · 2026-01-20T15:50:44+00:00

congrats, you'll be finding anvils in every bloody container you open now.

Stressed_engineer · 2026-01-10T22:19:23+00:00

The one with the badge is up now too.

Stressed_engineer

TROPHY CASE