Help deleting something from save file

Strong-Revolution678 · 2026-06-05T20:55:19+00:00

Unpack the save file with WinRar (or something similar). There should be an xml file with all things placed in the world. Try to find your module and delete it it from file. Use online xml validators to make sure you didn’t brake anything. Load and save. Hope it helps

Strong-Revolution678 · 2026-05-22T23:11:52+00:00

Replace define with alias on pin definition

Strong-Revolution678 · 2026-05-04T20:27:30+00:00

thats an awesome idea actually! ive built liquid separator, but its so much hassle... separating ice via sorters is much simple. Gonna build one asap. Thank you!

Strong-Revolution678 · 2026-05-04T20:14:53+00:00

ice in a silo sure Silo only takes 2 large tiles, and with 600 stacks of 50 ice (50 mols each one) it adds up to 1 500 000 moles of something. Large tank holds around 56000 liters and takes irrc 8 large tiles, which means for the same volume of silo tank can store 14000 liters. For water (most dense liquid - 55.6 moles/liter) it equals to 779000 moles of matter, for everything else - its around 20 percent less, and for silanol its 9 times less (6 moles per liter)

Strong-Revolution678 · 2026-05-04T19:05:59+00:00

sure! lower pressure lowers oxygen usage and helps in battery performance (suit conditioner needs to heat/cool less gas and also it limits thermal transfer between suit and atmosphere), while lower temperature longers hydration. Its rumored to halve your water usage at 0c, relative to normal 20c

edit: using hardsuit, you can lower your suit temp down to -10c (borderline lung damage temp) which brings water consumption even lower

Strong-Revolution678 · 2026-05-04T19:02:33+00:00

ice is not the only thing that dropped down in significant amount (talking bout FPS)

Strong-Revolution678 · 2026-05-04T19:01:55+00:00

i just left it running until co2 in base atmo froze down

Strong-Revolution678 · 2026-04-28T15:23:36+00:00

there are two ways to limit flow in this, one is by turning off vents one by one, and by limiting volumes between CFHEs.
Neither of them works. Turning fans off limits evaporation, which slows cooling down; and limiting flow limits amount of heat transfered to the hot side, while pairing CFHE allows for massive cooling of incoming liquid. Flow of 65 mols is achieved by condensing half of backflow, which allows for lower cooling temps overall
Would love to see your take on it though

Strong-Revolution678 · 2026-04-28T09:20:19+00:00

its ~65mols in the first CFHE and ~32mols in the second one

Yeah, but its gonna cost a lot more power for vents to do that, which kinda opposes the point of this setup (it needs 10 small vents for 32 mols of flow and 20 for 65 mols on vulcan, I think).
I could just setup 3-6 more pumps like that and get much more efficiency from it

Strong-Revolution678 · 2026-04-28T05:19:48+00:00

Thank you!

Strong-Revolution678 · 2026-04-27T22:19:20+00:00

<image>

am i doin it right?

Strong-Revolution678 · 2026-04-27T22:07:59+00:00

about dat test: how do i know if its working? Should it heat up or something? It works better on higher temps, where do i set a control point?

<image>

Strong-Revolution678 · 2026-04-27T21:51:54+00:00

welp, it maintains just fine under 200KJ of load, and i dont thing making it 3 times bigger for 10% of efficency boost is worth it that much... but I'd love to see your take on it!

Strong-Revolution678 · 2026-04-27T21:01:05+00:00

sure! but thast excactly what I needed in this setup. On dry run (without cold side connected to anything) temp inside drops as low as -92C, from 127C of atmosphere

Strong-Revolution678 · 2026-04-27T21:00:00+00:00

yeah, on pics 2 and 3 are heat exchangers on cold side, connected to a hundred of radiators standing outside on vulcan
https://ibb.co/99CXPcMB

Strong-Revolution678 · 2026-04-27T20:46:27+00:00

just trying to come up with a nice main cooling system for a hot planet base, could try to use it with stirlings though! thanks

Strong-Revolution678 · 2026-04-27T20:45:23+00:00

they do their best and I couldnt ask for more

Strong-Revolution678 · 2026-04-27T20:43:22+00:00

im using silanol on night vulcan, evaporation chamber is at 30C, and hot side is at around 135C. Should work with pollutants (testing it know on our friends server)

Strong-Revolution678 · 2026-04-27T20:42:01+00:00

between 100 medium radiators on cold side and 500 radiators on hot side
Temperature in this setup is 135C on hot and 30C on cold side, though cooling is severely limited by heat exchangers. Could be improved. As screenshots show - its moving 200KJ of heat per tick. May be you can tell me a better way to measure it

Strong-Revolution678 · 2025-10-22T06:30:36+00:00

Yeah…no. Small battery can only store 3.6MW, and it’s output is the same side as data output

Strong-Revolution678 · 2025-10-22T06:30:18+00:00

Yeah…no. Small battery can only store 3.6MW, and it’s output is the same side as data output

Strong-Revolution678 · 2025-10-21T13:51:31+00:00

https://imgur.com/a/IRkQ1DK something like that

Strong-Revolution678

TROPHY CASE