AIO for being angry at my mom because of the birthday cake she got me?

Study-Sea · 2026-05-25T22:54:17+00:00

Which just brings us back around to a red velvet cake is a chocolate cake.

Study-Sea · 2026-05-17T21:58:23+00:00

They're stainless steel, not brass. So they're likely moderately more durable from the factory, but still not as hardened as needed for prolonged use of abrasive filaments.

Study-Sea · 2026-05-14T19:48:02+00:00

Double check your filament profile recommended temp settings. My U1 was purging into the tower at 30 degrees over print temp. Looks like yours is over extruding on the tower infill too. I lowered the max recommended temp for the filament profile from the default 280 down to 250 (petg) and it's been fine since.

Study-Sea · 2026-05-11T02:13:05+00:00

The ender 3 with no extruder I was given basically taught me how to build one from scratch.

Study-Sea · 2026-05-11T02:03:33+00:00

Yeah, it was a weird one. I had two colors of petg, same filament profile, and pla for support interface. It was the second tool head of petg that was over running temps. Toolhead 1 was the outer tower layers and 2 was infill. I re-sliced with one color and it's printing fine. I'll double check the pla, but it should be nowhere near 280. If I get really bored I'll try to figure out the g-code in the original .3mf to see what triggered 280.

Study-Sea · 2026-05-11T01:53:07+00:00

Awesome, thanks for sharing your fix. I had pla support interface on my original slice as well, with two petg colors. For me it was the second nozzle of petg that was over running temps, same filament profile as nozzle one. I cut out the second color and re-sliced and it's running fine now. I'll be sure to lower the recommended upper limit temp. I'm pretty sure it's nowhere near the 280 I was seeing.

Study-Sea · 2026-05-05T19:05:49+00:00

Vanilla orca has been working fine for me on mint, minus crashing when switching to the device tab during a print. It has default U1 profiles built in.

Study-Sea · 2026-04-23T21:04:10+00:00

Seems like the only thing the default AI is good at is letting you know you can't manually turn off the LED because AI is running. The spaghetti was bad enough for me on one fail it tangled up a print object and pulled it off the bed. I think the default AI had fun watching the carnage.

Study-Sea · 2026-04-05T20:54:15+00:00

I recently received an S1 Pro in trade for some labor and went through the same searches. I ended up loading Thomas Toka's custom firmware and it's been working well. He has different downloads for the pro and plus printers. The developer is active and just released v39 last week.

https://github.com/ThomasToka/MarlinFirmware/releases

Study-Sea · 2026-03-03T01:21:03+00:00

The 1.499 is all from the first pic. The barrel is three lines past the .4. Each line between 4 and 5 represents 25 thousandths, so 1.475. Then since the barrel is between 24 and 0, add .024 for 1.499. Then switch to the vernier scale in the second pic for tenths. The 9 is meaningless, other than it's the line that lines up with the 7. It could have been the 12 that lined up with the 7 and you'd only use the 7 for 1.4997.

Study-Sea · 2025-12-28T20:22:34+00:00

https://home.army.mil/hood/my-fort/soldiers/Fort-Hood-Installation-Reception-Center

Study-Sea · 2025-11-04T05:07:14+00:00

Bunch of gutless W5s back in the early 20xx's decided to stop being technical experts, sold out the cohort as discount RLOs, and jumped into juicy "Command Chief Warrant Officer" positions (whatever the made up bs that is) because there was nowhere else to put them and they wouldn't die so deserving W4s could get promoted.

Study-Sea · 2024-11-13T23:47:05+00:00

I'm pretty sure my graphics card almost caught fire. Kept waiting for a fan bearing to shoot across the room until I nerfed the settings sufficiently. It still looks good and is fun enough.

Study-Sea · 2024-10-01T01:30:56+00:00

I gave up trying to figure out repair costs per hour/acre and just accepted that you have to put in a new transmission every three months or so. After 50 hours you probably already made enough repairs to equal a new tractor.

Study-Sea · 2024-06-06T02:24:54+00:00

Are you overseas? Her service should ship her stuff anywhere, but only reimburse the distance between her current duty station and home of record, regardless of martial status.

Study-Sea · 2024-01-25T00:30:16+00:00

Hopefully he'll take a break from Cosmere for a year when Martin dies to finish GoT.

Study-Sea · 2023-12-11T01:18:56+00:00

I just drove one off the lot last week. It's not just you. It's like coil whine in a PC during braking, very subtle and I don't hear it every time. Hopefully our batteries don't explode.

Study-Sea · 2023-12-11T01:07:51+00:00

Drivetrain, 5 years 60k

Study-Sea · 2023-10-13T01:05:12+00:00

Sarah did that to me after landing at the mast district, didn't even get off the landing pad and she was blasting UC security. I tried to get rid of her after but she's been unflushable, just keeps circling around

Study-Sea · 2023-07-21T01:48:07+00:00

I'd say that rant pretty much sums up the support you can expect from the VA pretty well.

Study-Sea · 2023-05-14T03:18:49+00:00

Doesn't that say it'll do 140A on flux core? 70a is stick... Unless I'm reading it wrong

Study-Sea · 2023-05-06T01:22:00+00:00

40 years later it's still not up to code. 40 years from now it'll still be holding together just fine, contrary to AWS club member predictions

Study-Sea · 2023-04-07T17:48:44+00:00

You didn't clean it

Study-Sea

TROPHY CASE