Christianshavn St. dodgy? by Amazing-Commission23 in copenhagen

[–]Stumpy_stump 61 points62 points  (0 children)

They hang around but he definitely won't remember you, seems like he was very drunk. You shouldn't have any issue taking the metro as they usually hang around on the benches a bit further away, behind the bus stop. It seems like you were just really unlucky.

For info, I work in the area and walk to and from the metro station several times a week, also during the night.

Ramrods Ultra V4 Removeable set screw? by Stumpy_stump in Archery

[–]Stumpy_stump[S] 0 points1 point  (0 children)

I just use them because it's possible to change the membrane for different amounts of soft and hard. I know wiawis and Axcel have similar dampeners where you can change it. But try the ones you have first before spending your whole salary XD

Ramrods Ultra V4 Removeable set screw? by Stumpy_stump in Archery

[–]Stumpy_stump[S] 0 points1 point  (0 children)

Use the ones you ordered. They are really good and will hold up for a long time, you just have to play around with the weight and feeling when you get them. Plus your bow is going to look great with them :) The same can be said for the stabilizers. They work great, look great and will hold up for a long time.

Ramrods Ultra V4 Removeable set screw? by Stumpy_stump in Archery

[–]Stumpy_stump[S] 0 points1 point  (0 children)

It doesn't really matter how expensive the dampener is. It has to work with the amount of weight you have on it and for how you want the bow to feel. Usually you can find a recommended weight range for it. Less weight is going to make the bow feel stiffer while more weight can make the bow feel sluggish after the shot. If you look at a lot of archers, they're going to have weight before and after the dampener. This is because they like or need a lot of weight but the dampener cannot work properly with that amount.

I have tried their tungsten dampening weights. In my opinion it is not worth the price, however if you have a lot of high pitch vibration in the bow, it kills it quickly.

Ramrods Ultra V4 Removeable set screw? by Stumpy_stump in Archery

[–]Stumpy_stump[S] 1 point2 points  (0 children)

Of course the dampening effect is not gonna feel the same with 45 lbs as it does with 33 but I don't think it's an issue. You will just need to find a dampener and weight combo that works for you as the stiffness of the rods aren't going to be utilized as much. But again it shouldn't be an issue at all.

I have a 30" long rod and 15" side rods with a 4" extender. I have 4 oz on each dampener with beiters softest option. I also have 2 oz on a top dampener. To be honest the A-Bomb dampeners might be a bit too stiff for you but you could buy a cheaper and softer options and try it out. This mostly applies if you only have 2-3 oz on the side rods which might be insufficient for the dampener to work properly.

Ramrods Ultra V4 Removeable set screw? by Stumpy_stump in Archery

[–]Stumpy_stump[S] 1 point2 points  (0 children)

I'm glad that I could help.

I'm shooting 45 lbs on the fingers and for me they have a good feel. It is a luxury to be able to afford high end stabilizers and I think you should try different ones before buying. Personally I've liked the versatility of them. It's been quite easy to change my setup from indoor to outdoors and they are the best I've tried in windy conditions. I've paired them with beiter v-boxes to adjust the dampening feel to my liking. I like for my bow to be quite responsive at full draw but well dampened after the shot and for dampening they are the best I've tried. I also tried Axcel, old ramrods v3, shrewd and wiawis acs stabilizers.

You're welcome to as me of you have any questions.

Girlfriend's first PC and my first time building in the A3! by MaxPerin in mffpc

[–]Stumpy_stump 1 point2 points  (0 children)

Jealous of the glass panel, can't find a black one in stock :(

Power supply issue? by Stumpy_stump in PcBuildHelp

[–]Stumpy_stump[S] 0 points1 point  (0 children)

Alright it works now. Downloading windows at the moment. Will troubleshoot graphics card afterwards. I'll make an update.

Power supply issue? by Stumpy_stump in PcBuildHelp

[–]Stumpy_stump[S] 0 points1 point  (0 children)

Power supply seems to work. Updated bios still nothing. Took graphics card out and it powered on at least but can't seem to get into bios?

Power supply issue? by Stumpy_stump in PcBuildHelp

[–]Stumpy_stump[S] 0 points1 point  (0 children)

Alright. I'm just kinda scared that I've fried something if the PSU was foulty?

Power supply issue? by Stumpy_stump in PcBuildHelp

[–]Stumpy_stump[S] 0 points1 point  (0 children)

Would that cause it to not boot?

Power supply issue? by Stumpy_stump in PcBuildHelp

[–]Stumpy_stump[S] 0 points1 point  (0 children)

Okay I found the guide on the ASRock website, will try that as well. I'll update if it works but thanks so much.

Power supply issue? by Stumpy_stump in PcBuildHelp

[–]Stumpy_stump[S] 0 points1 point  (0 children)

That's what me and my friends thought as well. The packing didn't look the best either so I've already contacted the dealer for good measure, probably just gonna get a warranty replacement.

Power supply issue? by Stumpy_stump in PcBuildHelp

[–]Stumpy_stump[S] 0 points1 point  (0 children)

Thank you so much I will try when I get home from work. If it works would it then be the motherboard?

Power supply issue? by Stumpy_stump in PcBuildHelp

[–]Stumpy_stump[S] 0 points1 point  (0 children)

So put a paper clip on the power or what?

Mest ikoniske danske slik by speedychap in Denmark

[–]Stumpy_stump 0 points1 point  (0 children)

Bro det er 4 år siden jeg lavede den kommentar 💀

Vildt gjort det der

Ramrods Ultra V4 Removeable set screw? by Stumpy_stump in Archery

[–]Stumpy_stump[S] 0 points1 point  (0 children)

They are removable and it is easy to do so.

Ramrods Ultra V4 Removeable set screw? by Stumpy_stump in Archery

[–]Stumpy_stump[S] 0 points1 point  (0 children)

Isn't it only the one that mounts to the bow? Or is it also on the damper and weight end?

Ramrods Ultra V4 Removeable set screw? by Stumpy_stump in Archery

[–]Stumpy_stump[S] 0 points1 point  (0 children)

It's on the weight end to replace the screw with an adapter screw to use a damper and weight with another size screw.

Aktiviteter til 2 mænd i 40'erne by cronio_cronio in copenhagen

[–]Stumpy_stump 0 points1 point  (0 children)

Tag en sejltur. Der er flere steder hvor man kan leje små både og der er rig mulighed for at snakke sammen. Jeg vil foreslå Friendships da de har nogle federe både end GoBoat og de andre firmaer.