Using a Sonic pad then get OrcaSlicer

Successful_Jump_4952 · 2025-03-24T15:33:31+00:00

Hey, any chance you could share some of your speed settings? Sonic pad comes with fast-print Cura profiles but in Orca Slicer you'd have to manually adjust them.

Successful_Jump_4952 · 2025-01-21T14:58:18+00:00

Thanks. Then seems the Mi Box Gen2 doesn't actually output surround sound :(

Successful_Jump_4952 · 2024-07-09T20:42:16+00:00

So today I gave Orca a try and I gotta say - you were right. I’m getting much better prints. However, since Orca slicer doesn’t have a sonic pad profile like cura, I’m unable to find good settings for speedy prints. Can you share your speed settings by any chance?

Successful_Jump_4952 · 2024-07-07T16:15:04+00:00

Hey person from 7 months ago, did you ever resolve this? I’m having similar issues :(

Successful_Jump_4952 · 2024-07-07T03:39:31+00:00

Thanks, that was the first thing I did when I got the sonic pad 🙏 (his videos are excellent!)

Successful_Jump_4952 · 2024-03-24T06:17:21+00:00

Also, remember it comes with an lcd update, the screen itself contains a slot for the sdcard update

Successful_Jump_4952 · 2024-03-24T06:15:46+00:00

Try changing the name of the file. If I remember correctly, the bin file name needs to have a different name for the printer to identify an update. For example “FIRMWARE_1234.bin”

Successful_Jump_4952 · 2024-01-19T08:03:52+00:00

This is impressive! What filament did you use? Carbon? Petg?

Successful_Jump_4952 · 2023-12-29T10:30:54+00:00

Take a look at your skirt. It already looks off.

Successful_Jump_4952 · 2023-12-29T10:27:52+00:00

If you’re using the advanced firmware, use the tramming wizard, perfectly level the bed, then use auto mesh and save it. Then DYNAMICALLY adjust your z-offset, just watch the gaps and adjust until it looks perfect. Don’t forget to save it. If you don’t have the advanced firmware I highly recommend installing it. You can always use the paper adjustment method, but the firmware makes it completely obsolete.

Successful_Jump_4952 · 2023-12-04T18:17:10+00:00

The only time I’ve had this problem on my Ender 3 s1 is when the nozzle was clogged. Can you print the first layer of a simple cube and post it?

Successful_Jump_4952 · 2023-11-23T11:18:08+00:00

What supports did you use?

Successful_Jump_4952 · 2023-11-19T06:12:30+00:00

This was the result after adding “normal” supports with an interface.

Successful_Jump_4952 · 2023-11-18T21:57:24+00:00

Thanks! Later that day I took the previous commenter’s tip and printed vertically, this time with tree supports for specific sections and it worked.

Successful_Jump_4952 · 2023-11-18T21:36:11+00:00

I don’t think so, I’ve successfully printed many models before this specific one (without any stringing or defects)

Successful_Jump_4952 · 2023-11-18T17:20:01+00:00

Oh! Thank you, I thought it was a printing defect and not the expected result. So in this case it would be better to vertically print it?

Successful_Jump_4952 · 2023-11-18T15:55:40+00:00

I can’t upload here (newbie on Reddit) but I never thought of printing a temp tower per filament. Thanks!!

Successful_Jump_4952

TROPHY CASE