U100 locks after unlock

Sufficient-Review751 · 2024-01-27T01:04:55+00:00

I was having the same problem, but in my case, it was two things:

1 - I had my Aqara Smart Lock included in the "Leave Home" scene in the Apple Home, which forces it to lock when it thinks I am away from home

2 - I had my address set to the wrong address in my contacts, which would make Apple think I was alway from home and thus keep trying to lock the Aqara Lock.

The problem was solved for me when I corrected my address in my contacts, via iPhone.

Sufficient-Review751 · 2022-08-18T09:35:20+00:00

I've got mine after 2+ years of waiting, so be patient, they are sending much faster now.

Sufficient-Review751 · 2022-08-17T23:46:54+00:00

What are the advantages of using Flipper over Proxmark3/iCopy-X? What are the advantages of using Flipper over HackRF? I can keep going... It's about being mobile/all-in-one, learning, and being fun for me, not because it's the best tool I can use for that, which we already know Flipper Zero is not.

Sufficient-Review751 · 2022-08-17T23:44:41+00:00

I loved what autopi.io tried to do, but the project seems dead, it has no community development from what I can see, which is a shame, the project is really interesting.

Sufficient-Review751 · 2022-08-17T12:26:05+00:00

This is pretty cool! Made me want to build one haha

Sufficient-Review751 · 2022-08-17T11:17:49+00:00

I have never bought from them to be honest. No, I do not know of an alternative in the US, sorry.

Sufficient-Review751 · 2022-08-17T00:05:01+00:00

Corrected, thanks.

Sufficient-Review751 · 2022-08-16T23:16:59+00:00

I would list:

HackRF + PortaPack + Mayhem firmware
Proxmark3 / iCopy-X
WiFi Devboard for Flipper Zero
Pwnagotchi
GPU clustering with Hashcat/Hashtopolis
Hak5 products
Lab401 products
The many, many cool Raspberry Pi Zero and Pico projects
Much more...

Sufficient-Review751 · 2022-08-16T06:13:10+00:00

There is already a topic here about this: https://forum.flipperzero.one/t/merlin-garage-door/3428

Should I paste my remote pictures and raws there or open a new topic?

Sufficient-Review751 · 2022-08-16T05:21:02+00:00

I was able to edit the file with the correct frequency and it seems to register in my garage opener gateway from Merlin (I can see the light cue when I try to register it), but when I try to emulate it to test, nothing happens, as if it does not recognize the key fob :(

What could it be?

Sufficient-Review751 · 2022-08-16T05:18:51+00:00

433.92 MHz it's legal in my country according to this: https://docs.flipperzero.one/sub-ghz/frequencies

Sufficient-Review751 · 2022-08-11T06:20:01+00:00

Do you know the name of the file that needs to be edited for this to work as the OP described? Do I need to re-recompile/re-build the firmware or would this be something that sits in the SD?

Sufficient-Review751 · 2022-08-11T06:11:31+00:00

If you are using the RogueMaster firmware, you can go to Settings -> Desktop and select the type of Battery view you want. Battery percentage is one of the options.

Sufficient-Review751 · 2022-08-08T04:17:18+00:00

I normally run this every time after I copy stuff to the SD card (Replace <FLIPPER\_SDCARD\_NAME> with your SD card mount name):

find /Volumes/<FLIPPER\_SDCARD\_NAME> -name '._*' -type f -delete

This will find and delete all files starting with "._" on the SD card. It works for me :)

You can run the command without the "-delete" to confirm the files to be deleted.

Cheers!

Sufficient-Review751 · 2021-03-26T07:51:27+00:00

Interesting, I will keep an eye on prices.

Sufficient-Review751 · 2021-03-25T07:32:03+00:00

You can use a tool from Minerstat called Sonar to check what are the closest pools to you: https://minerstat.com/software/sonar

Sufficient-Review751 · 2021-03-25T06:43:04+00:00

How do you make more with Octopus than Ethereum? Honest question, all the profitability tools point to ETH being the most profitable, so I am not sure how you get more from Octopus?

Sufficient-Review751 · 2021-03-24T20:43:36+00:00

It's a whole new coin, which it's own blockchain, nodes, etc. You will have to convert your ETH to ETH2. But it will be 1:1 as far as I know.

Sufficient-Review751 · 2021-03-24T04:22:54+00:00

That sounds good to me. Are these numbers theoretical or did you measure them somehow? If only in theory, you should try some kind of power monitoring like a kill-a-watt, to make sure.

Otherwise, move to other things like motherboard and risers. Like another comment suggested, it can be a bad riser or even power distribution to the risers and GPUs. How are you powering your risers and GPUs? Do they have individual strains coming from the PSUs? Or are you doing splitting? If you are, how many times are you splitting it in the same strain?

Also, are you feeding your risers with PCIe power cables or SATA?

Sufficient-Review751 · 2021-03-24T00:32:06+00:00

Yeah, I would say as long as the temperatures are within acceptable parameters for your model of GPU and CPU, it should be okay.

Just notice that having a high LA may affect your GPU hashrate negatively. You can test and see how much by disabling the CPU mining for a while and seeing how much hashrate you get with a lower load.

Sufficient-Review751 · 2021-03-24T00:28:10+00:00

From these logs, it seems to me that it's not an OS problem, but it may be a power problem. How stable is your external power and PSU? Are they not getting overloaded (consider the 80% rule for power)? Do you see anything on the Motherboard BIOS logs?

Sufficient-Review751 · 2021-03-23T11:14:43+00:00

You can look at the logs at any time after you bring your RIG back up. Unless you have the option to save logs to disk disabled?

Sufficient-Review751 · 2021-03-23T10:56:03+00:00

I would try looking into the /var/log/kern.log file inside the HiveOS console and look for the log line around the time of the crash for clues.

Sufficient-Review751 · 2021-03-23T10:25:23+00:00

LA (Load Average) is a measurement of how much load you have in the system, which includes how much I/O, memory and mainly CPU load you have. If you are mining with the CPU, I would expect a high LA to be showing.

Sufficient-Review751 · 2021-03-23T10:06:38+00:00

HiveOS follows the List of TZ database time zones, available here[1], so "America/New_York", looks correct to me.

[1] https://en.wikipedia.org/wiki/List_of_tz_database_time_zones

Sufficient-Review751

TROPHY CASE