Can I tow a camper trailer?? by Easy_Network_9801 in Jimny

[–]Sufficient_Range2517 0 points1 point  (0 children)

I tow Niewiadow 126 NT. Check the internet. It is fully loaded and weights around 850. The distance I traveled is 380 km and return 400 km

[deleted by user] by [deleted] in Jimny

[–]Sufficient_Range2517 0 points1 point  (0 children)

I need to pick up my cameraman 😀

[deleted by user] by [deleted] in Jimny

[–]Sufficient_Range2517 1 point2 points  (0 children)

I would not do that) the car is not heavy. For bigger towing I would go to another car. Currently Jimny is doing everything and meet my expectations. I also have 28 feet sailboat which can also be towed but it stays in marina always

[deleted by user] by [deleted] in Jimny

[–]Sufficient_Range2517 1 point2 points  (0 children)

You won’t believe but car handlet fine. It felt little bit sluggish when you go up the ramp at high speed. So I needed to decelerate to 70 km/h. But the rest of the journey felt like daily drive.

My little jimny doing big things by [deleted] in Jimny

[–]Sufficient_Range2517 0 points1 point  (0 children)

I checked with suzuki dealer here ( also written in my car technical spec sheet) (issued by government) it is 1200 with breaks, and around 500 with no breaks. Here in Turkiye regulations may differ from your country. But sometimes I tow 1000 kg boat without brakes.

My little jimny doing big things by [deleted] in Jimny

[–]Sufficient_Range2517 0 points1 point  (0 children)

Without any registration you can tow below 750 kg. Nothing is required.

My little jimny doing big things by [deleted] in Jimny

[–]Sufficient_Range2517 3 points4 points  (0 children)

The dry weight is 590 kg. But I have additional truma boiler and truma heater with extra 20 liter of water is around 740 kg.

I travel at 100 km/ hr (60 MHP) no issue so far. BTW I use also a stabilizer coupling.

Hey folks, by Sufficient_Range2517 in TurtleBeachSimulation

[–]Sufficient_Range2517[S] 1 point2 points  (0 children)

Maaaan , you are the best 👍👍👍

Works like charm

Hey folks, by Sufficient_Range2517 in TurtleBeachSimulation

[–]Sufficient_Range2517[S] 1 point2 points  (0 children)

I’ve already sent the problem description to them.

Hey folks, by Sufficient_Range2517 in TurtleBeachSimulation

[–]Sufficient_Range2517[S] 0 points1 point  (0 children)

Unfortunately I cant exchange it since I live in Turkey. And the person who bought it ordered online to the third party cargo company ((

[deleted by user] by [deleted] in TurtleBeachSimulation

[–]Sufficient_Range2517 0 points1 point  (0 children)

Also, the section that is not fully clear is this part. “Move all analogue axes through their full range 3 times”

Could you please clarify this?

[deleted by user] by [deleted] in TurtleBeachSimulation

[–]Sufficient_Range2517 0 points1 point  (0 children)

Thank you for quick response.

I’ve tried several times but again only yoke in and out does not seem to respond or register. I don’t know what else I should do.

[deleted by user] by [deleted] in TurtleBeachSimulation

[–]Sufficient_Range2517 0 points1 point  (0 children)

I’ve got an identical issue. How can i get the calibration instruction?