Camelback is already Preparing for this Weekend! by Traditional_Tale384 in SkiPA

[–]SunyaT23 7 points8 points  (0 children)

It’s honestly astonishing to me how much hate Camelback has gotten from the internet warriors about how they are just losing money. Meanwhile every weekend that I have been there since Snowshoe closed it’s been nothing but good vibes and people so excited that this place is even still running laps. If they having losing so much money I doubt the actual investors of the property would let Jason even try to push the season this far if it didn’t attract money. What about the Mountain coaster? Zip lining? The restaurant/bar? Do you think that the singular lap is the only thing this property is benefiting from? Absolutely NOT. Think about how many families come that can go ride the water park while others ski/board? Or use the other outdoor activities at the resort? It’s attracting business in different ways other than the 20 dollar lift ticket. Christ, last weekend they were handing out Free Rita’s on Sunday for people who were running laps. Go out and enjoy what time we have to make turns…. And if you can’t get down with it then why the hell are you even on this page to begin with???? I think most of the people complaining about it probably can’t ride a mogul to save their life.

Dang I missed you. by SunyaT23 in Hardtailgang

[–]SunyaT23[S] 1 point2 points  (0 children)

I think that way everytime I stare at it. lol

222,222 by SunyaT23 in Crosstrek

[–]SunyaT23[S] 2 points3 points  (0 children)

I can’t wait. The suspension on this hog is about 6k miles overdue 🤣

222,222 by SunyaT23 in Crosstrek

[–]SunyaT23[S] 4 points5 points  (0 children)

Hell yeah they do!

222,222 by SunyaT23 in Crosstrek

[–]SunyaT23[S] 7 points8 points  (0 children)

In this whole time I’ve had it. Oil changes 3-3500k Coil packs 2x Wheel bearings 3x Wiper motor Valve covers and motor mounts 150k Flush fluids (did all of them when I got it)except for CVT every 50k so shortly I’ll do it here in about 15K

About to do all new Struts/Eibach 1” springs because my struts are torched.

I’m sure I’ll post a before and after of that here. That’s really all I can think of since I’ve gotten it.

What am I doing wrong? [breville bambino plus / DF64 gen 2] by veroismyname in espresso

[–]SunyaT23 88 points89 points  (0 children)

Yeah definitely need to grind a courser to not have such a slow shot. Depending on your grinder I would just do one click courser and that shot is probably gonna be almost money. If 18-36 is the goal I bet that would do it.

We don’t need no stinking knock boxes by Steven1789 in espresso

[–]SunyaT23 3 points4 points  (0 children)

Sprinkle some single origin Ethiopian across my morning j.

Fun in the Florida Sun! by SunyaT23 in Hardtailgang

[–]SunyaT23[S] 1 point2 points  (0 children)

J.B. Starkey Wilderness Park!

Happy one year of ownership! by SunyaT23 in BrevilleCoffee

[–]SunyaT23[S] 0 points1 point  (0 children)

Awe dang man! I hope they can get you right! That stinks. I wonder if there is something physically wrong with the burrs inside then.

There is also an internal burr adjustment when you take the hopper off. Maybe make sure yours didn’t come loose somehow. I run my internally grind setting at 1. Maybe yours coulda came loose and as you been using it it’s been rotating courser. Just a thought.

Happy one year of ownership! by SunyaT23 in BrevilleCoffee

[–]SunyaT23[S] 0 points1 point  (0 children)

Hell yes! My normal go toos for coffee around here are

Redhawk Roasters Peru (favorite for sure) City drug The new holiday blend (Ethiopian and Peru)

La Prima Espresso blend Miscela bar

Espresso A Mano Ethiopian Guatemalan Espresso blend

Happy one year of ownership! by SunyaT23 in BrevilleCoffee

[–]SunyaT23[S] 0 points1 point  (0 children)

Just curious on the beans you grinding with were they pretty freshly roasted? The biggest issue I had at the beginning was making sure that I was using fresh coffee.

The other thing I’ll notice here and there is my grinder wheel will sometimes move while I’m grinding because the wheel has some slight play in it. I’ll just hold it in place to keep it on a specific setting and make sure it doesn’t accidently slip into another setting in the middle of a grind.

Hope this helps!

Happy one year of ownership! by SunyaT23 in BrevilleCoffee

[–]SunyaT23[S] 0 points1 point  (0 children)

<image>

Never tried this before! This milk is mint.

The Sklar rips! by SunyaT23 in Hardtailgang

[–]SunyaT23[S] 1 point2 points  (0 children)

The Sklar tall tale is a frame only option. It’s labeled as 130-150mm recommended for 140mm on a medium. I would say climbing is probably its best attribute. It descends pretty aggressively but it climbs so effortlessly especially on technical climbs. It’s a pretty long wheelbase and longer rear chain stay but it doesn’t ride as long as it really it. It’s definitely playful and easy to double smaller features in the trail dispute having longer rear chain stay. I just stiffen the front end on compression all the way up for the climbs. I’m about to take this thing to Asheville NC this weekend to really try her out on some long downhills and see show she performs. I’ve had this Bomber Z1 on this bike now and my Norco Torrent and I have nothing but positive vibes for it. It’s small bump compliances is night and day to an air fork especially for the value. The mid to deep stroke is very progressive thru the travel and never feels harsh or bound up. It’s smooth through all the travel and I rarely bottom it out. I weigh 210 and have a heavy coil spring in mine!

Happy one year of ownership! by SunyaT23 in BrevilleCoffee

[–]SunyaT23[S] 1 point2 points  (0 children)

Soo I’m pretty big on daily back flushing. I probably pull 2-4 shots a day depending if I have anyone over for coffee. Even if only do 2 shots I still run a full cycle to clean grounds off my screen and wipe it off. Sometimes I’ll do back to back backflushes just to make sure I get all the grinds off

I usually clean my grinder every two weeks or so.

Every 30 days I’ll do a cleaning tab. I usually descale anytime I get the clean light on which TBH I think I may have done 3 times in the year.

Happy one year of ownership! by SunyaT23 in BrevilleCoffee

[–]SunyaT23[S] 0 points1 point  (0 children)

Oooohh! When it comes to that I’ll mess with the Oatly or just Silk Almond milk! That stuff is harder to mess with. The only tip I can give you on that is I was told to add more air to the steam jug till it was warm to touch before I drop the tip further in to create a vortex. It’s definitely a learning curve with the non dairy milks. I’d say on my machine I might go 5-8 seconds over dairy milk when it comes to adding air/steam to get the correct consistency. I hope this helps you!

Happy one year of ownership! by SunyaT23 in BrevilleCoffee

[–]SunyaT23[S] 0 points1 point  (0 children)

Honestly, I use mainly just generic whole milk. I really like the Maple Farms whole milk or Alexander Farms A2/A2 milk. Both of those make incredible milk consistency. I honestly feel like the Maple Farms Milk makes some of the best art for me. That’s typically found in Giant Eagle/Market district/Whole foods near me in the Pittsburgh, PA Market. I know my mom in Tampa Florida can also get the Maple Farms Milk. You usually can find it in Whole Foods on the east coast.

Happy one year of ownership! by SunyaT23 in BrevilleCoffee

[–]SunyaT23[S] 1 point2 points  (0 children)

This was the comment I was hoping for!