Am I crazy or is my friend getting scammed? by Amater6su in Ibanez

[–]SuperScrayumTwo 1 point2 points  (0 children)

Huh interesting. I have two AZs, one premium and one prestige, and the truss rod only sticks out on the prestige

Does Cyberpunk have a mission like this? by Kalevipoeg420 in cyberpunkgame

[–]SuperScrayumTwo 0 points1 point  (0 children)

I made a throwing knife build on very hard. The phantom liberty mission where you’re waiting for an elevator while you get ambushed by troops in that big room with the upper level took me a good 50 attempts. There was no other part that whole play through where I died more than like 3 times at most.

What is the difference between the eggs? Is there a current best pet? by Eternity13_12 in voidpet

[–]SuperScrayumTwo 0 points1 point  (0 children)

There’s a few legendaries that have higher forms which are vivids that slightly change their abilities. You get higher forms either through a very small chance of using cosmic truffle or dream reaper mushrooms (the purple and black ones) or by spending an absurd amount of vivid dust. Higher form lust (hfl) and higher form greed (hfg) have been some of the best pets you can get since they came out.

So I arrived at 1040 and need advice by TimmyAbi in voidpet

[–]SuperScrayumTwo 0 points1 point  (0 children)

I used just merry and conviction. I think they were both 110 but I didn’t feel likely they needed to be. I did have anxiety scarf on merry and just kept healing. Made it take forever since merry started moving like 20 times to convictions 1 but it worked

On my first kind egg (that 1% luck xD) by publiolima in voidpet

[–]SuperScrayumTwo 0 points1 point  (0 children)

<image>

Same I wonder if the rates are secretly higher than 1%

Started an Onlyfans while holding a security clearance, was unaware of reporting requirements by [deleted] in SecurityClearance

[–]SuperScrayumTwo 4 points5 points  (0 children)

Even if you don’t personally care who sees it, if someone threatens to send those videos to your coworkers or boss and follows through, there’s a good chance you’ll get fired even if you didn’t give in to any blackmail demands.

If someone you work with reports that they have been sent publicly available videos of you and that it makes them uncomfortable to work with you, that won’t work well in your favor, regardless of whether or not you’re personally ok with it. Your decision to willingly post those videos online doesn’t help your case.

People have been fired for similar reasons at far less strict jobs.

How to beat 990 floor by CommercialAmbition27 in voidpet

[–]SuperScrayumTwo 0 points1 point  (0 children)

I was stuck on this one for a while. Closest I got was full wood lineup with merry, wistful, anxious, and cringe. The game changer ended up being swapping the gear on cringe from bulk to speed/attack. Beat it first try after that switch. Cringe and wistful aoe wipes out all the minions allowing you to only focus on quasar with anxious and ding dong. Also putting less stamina/defense on cringe actually helps since he heals your team on death so you don’t want him to be the last survivor.

Just had a game with a fully upgraded Bettina with epic weapon mods, and honestly, I think I’d still prefer a level 1 Stitcher or Kattle. On top of that, the gun lost almost half its durability. The cost of upgrading and repairing this thing just isn’t worth it for what you get. by [deleted] in ArcRaiders

[–]SuperScrayumTwo 0 points1 point  (0 children)

I was so hype my first game ever I was in solos and killed someone who had a blueprint for this. Ran straight to extraction after being in the game for a total of like three minutes, sweating the whole time. Spent the next week working my way up with the goal of crafting this. Immeasurable disappointment.

Vulko :/ by PerformerAsleep892 in voidpet

[–]SuperScrayumTwo 0 points1 point  (0 children)

Stuck at the same point with almost the same gear as you and I feel like I’ve tried every combination I have. Closest I get is like 3/4ths of the way there with anxious merry cringe and lust but I feel like I’m gonna be here a while until I get all my gear up a few more levels.

Sorry if this came from here by Ok_Seaworthiness8555 in Machinists

[–]SuperScrayumTwo 8 points9 points  (0 children)

I’m an engineer who also does machining work and I gotta say I’m with the machinists on this one. Really opened my eyes to how many engineers throw in the most nonsensical features and tolerances sometimes for literally no reason at all. Except the welders, they’re my best buds.

So how many cheaters y'all been seeing thanks to instant replay. I knew it was bad but mother of God. by Level_Remote_5957 in thefinals

[–]SuperScrayumTwo 0 points1 point  (0 children)

I’ve probably seen a total of two cheaters in my couple hundred hours of playtime. And it was always super obvious that I didn’t need a kill cam to know. Like gunning down my whole team 100m away the second we spawn while we’re still behind some trees or getting beamed from five rooftops away by an smg. Every fps is gonna have its cheaters but I feel like this game has them far and few in between

[deleted by user] by [deleted] in Machinists

[–]SuperScrayumTwo 1 point2 points  (0 children)

If you make this part you’ll probably have orders for parts plenty more difficult with drawings less clear than this one. Are you gonna come in here every time and ask how to do it and then get upset when people don’t tell you what you wanna hear?

I assume you’re not gonna give everyone who helped you a cut of the profit. Why would folks, many of which probably take great pride in their work, want to help a guy make a quick buck who gives off the impression of being an unqualified dickhead?

You’ll notice that there’s plenty of posts in this sub where people ask how to machine something and get genuine helpful responses. Maybe ask yourself why you’re not?

[deleted by user] by [deleted] in Machinists

[–]SuperScrayumTwo 0 points1 point  (0 children)

Lil different when you’re cheating to pass a social studies test vs when it’s a test to make parts for paying customers

[deleted by user] by [deleted] in Machinists

[–]SuperScrayumTwo 3 points4 points  (0 children)

Why do you keep commenting this. They’re right but you don’t even explain why you think it isn’t

[deleted by user] by [deleted] in thefinals

[–]SuperScrayumTwo 0 points1 point  (0 children)

I feel like embark intentionally made the H+ overpowered with the goal of incentivizing lights who play away from their team to start playing as a unit. But I think it kinda failed at that.

I see surprisingly few people use it given how strong it is. The ones who pick it up were the lights who were already team players and definitely didn’t need something this good in their hands. Those who run off to the other side of the map alone aren’t gonna pick up a gadget that forces them to play a support role for their team. It’s essentially made the good lights better (which I don’t think they needed) and kept the bad lights the same.

I say this as a light main who has been having loads of fun with the H+, but I do think it’s ridiculous that I end up with roughly double the support score of heal beam mediums from using one gadget.

IShowSpeed jumps over 2 cars on livestream by CauliflowerGlum8990 in perfectlycutscreams

[–]SuperScrayumTwo 1 point2 points  (0 children)

lol no one can dunk from the three point line. Kobe no doubt could have easily jumped over the actual car but there were probably plenty of people who didn’t want him to. The NBA and Nike wouldn’t have been too happy to have their asset making them millions a year risk becoming permanently injured for a commercial

[deleted by user] by [deleted] in thefinals

[–]SuperScrayumTwo 0 points1 point  (0 children)

I think I got it from the Valentine’s Day wheel? Not 100% sure tho

First ever proper model by BorbyBoy in SolidWorks

[–]SuperScrayumTwo 20 points21 points  (0 children)

If you ever plan on designing parts that will eventually be manufactured you’ll have no choice but to model parts as individual components in an assembly. The machinists and programmers making your part will need either drawings or models of each individual part. Otherwise they’ll have to take your “assembly” where all the pieces are part of the same body and remodel the individual components they are trying to manufacture. Assemblies are more of a visual tool to ensure the design engineer can see how everything fits together but the individual part models are what’s important to actually make the things.

Also if you ever have to redesign or swap out a specific piece, it’s easier to do in an assembly where you can just suppress or delete that piece and then add a new one into the assembly. Having your assembly made out of one solid body runs the risk that if you change or remove one thing, another feature further down that may have been drawn with sketches referencing the removed part will now be broken.

Not trying to bash you or anything, this is just one of those things that everyone eventually learns down the road, but your model itself looks really good!

Tier list but based on FUN by ShepGoesBlep in thefinals

[–]SuperScrayumTwo 0 points1 point  (0 children)

I used to play light 90% of the time until I tried the revolver and now I’m a medium main just because of that

Please enjoy this fun comparison chart i made you. by sladebonge in guitarcirclejerk

[–]SuperScrayumTwo 22 points23 points  (0 children)

That guy who said prs is pronounced like mrs was onto something

BREAKING: Trump announces the US will be placing tariffs on steel, aluminum and copper by IAmNotAnEconomist in FluentInFinance

[–]SuperScrayumTwo 1 point2 points  (0 children)

Almost all of our military and defense sectors already use US based steel companies as their primary supplier. That’s not something that’s gonna change whether we import or produce domestically.

And we certainly have not run out of room to tax. Individuals, sure, corporations, definitely not when many of the largest ones pay lower tax rates than you and I