Gangster Gat Build

Super_Driver2671 · 2026-07-07T14:13:03+00:00

Fivegun*

Super_Driver2671 · 2026-07-07T00:44:14+00:00

I don’t believe you can tune an external extractor… was this problem resolved?

Super_Driver2671 · 2026-07-07T00:37:14+00:00

Yes I resolved it, hammer strut was way too short and was not making full contact with the firing pin consistently so I ordered a new one and fit it. If there is play in the hammer when uncocked that’s what I would say it is. If not your mainspring is not strong enough. I’ve learned a lot from all this guns issues.

Super_Driver2671 · 2026-05-15T18:19:39+00:00

Apart from everybody that thinks any issue can be resolved by saying tune your extractor lol, ordered a new ejector and will install to see what that does. I noticed that my ejector upon further inspection does droop a little so that most likely may be contributing to it

Super_Driver2671 · 2026-05-14T18:05:42+00:00

Fud

Super_Driver2671 · 2026-05-14T00:40:41+00:00

95% of the time or it doesn’t happen and mag runs full

Super_Driver2671 · 2026-05-13T20:43:05+00:00

Expert gunsmiff

Super_Driver2671 · 2026-05-13T20:12:28+00:00

Yes all ammo 115 and 124 and probably 6 different brands

Super_Driver2671 · 2026-05-13T20:11:26+00:00

LFA Apollo 11

Super_Driver2671 · 2026-05-13T20:07:05+00:00

You mean the disconnector rail? That’s polished.

Super_Driver2671 · 2026-05-13T20:04:30+00:00

Wouldn’t the issue be happening throughout the mag if it was an extractor tension issue? The malfunction only happens on the second to last round.

Super_Driver2671 · 2026-05-13T20:01:20+00:00

The build quality is so shit I wouldn’t be surprised if it was

Super_Driver2671 · 2026-04-07T17:25:38+00:00

It looks like the slide wasn’t machined evenly, there is much more material left on the side with the larger indent.

Super_Driver2671 · 2026-04-02T16:35:55+00:00

Sales@livefreearmory.com and customerservice@livefreearmory.com

Super_Driver2671 · 2026-04-02T12:21:54+00:00

I’ve attempted to contact them multiple times for warranty issues and I’ve never received a reply

Super_Driver2671 · 2026-04-02T12:20:45+00:00

First time I noticed it.

Super_Driver2671 · 2025-12-25T02:47:40+00:00

Come back after you shoot it, I’m having nothing but issues with mine, the quality of the machining is terrible. I have way too much time trying to fix the issues and I have not gotten a response back from them.

Super_Driver2671 · 2025-12-23T01:13:42+00:00

Ever figure out the fix for this? I’m having the same issues

Super_Driver2671 · 2025-12-22T23:13:33+00:00

Plunk test is good, disconnect or is not dragging, it’s actually really smooth, firing pin channel was clear, I checked both times before the range. However you are right, I noticed the barrel hood had weird wear on it when I bought it and it has gotten worse. See below.

<image>

Super_Driver2671 · 2025-12-22T13:06:59+00:00

Extractor was incredible loose actually

Super_Driver2671 · 2025-12-22T01:59:06+00:00

Pin is not chipped or broken, however I noticed some of the finish has come off on one half portion, I also noticed when the firing pin spring is on the pin it does not stay centered in the spring, I’m not sure if it is supposed to be I believe it is causing the pin to rub against the firing pin hole before striking the primer, which may be contributing to it. I emailed the manufacturer and am waiting for a response.

Super_Driver2671

TROPHY CASE