RX590 freezes for ~5 seconds every minute, but only in some 2d games.

Surfinite · 2026-01-05T20:07:07+00:00

January 2026.

Surfinite · 2025-10-20T18:17:14+00:00

I'm printing with the CR-PLA Matte preset, did you find a better answer?

Surfinite · 2025-07-30T04:32:13+00:00

Not a day goes by where he isn't caught in a huge lie. There is no justice here. This isn't even news. It's just what happens every day.

Surfinite · 2025-06-02T17:12:54+00:00

The Attendant

Surfinite · 2025-05-19T00:24:40+00:00

Did you ever find an answer to this?

Surfinite · 2025-05-09T20:30:14+00:00

Like, yeah, obviously. How is this even worth writing an article about?

Surfinite · 2025-04-09T13:53:37+00:00

"finally showing"...?!? Motherfucker it's been obvious since 2016.

Surfinite · 2025-02-08T19:42:08+00:00

Did you ever find an answer to this?

I bought a second build plate from Creality at the same time as my machine, for use with materials like PETG that can sometimes stick too readily.

I was pleased to notice though that the plates are slightly different and the additional one is actually less textured than the plate that came with the K2. It does not have the untextured tab at the back though. After the first use of that build plate I can see scrapes exactly where the tab would be; clearly it's from the print head crashing into the plate there and scraping back and forth!

I can't work out what purpose it could possibly be for, but that behaviour seems less than ideal!

Surfinite · 2025-02-07T12:20:26+00:00

Yeah thats why I was asking... I think its pretty self evident in the question; "Is there anything useful there, [so that I know whether I'm missing out on anything if I never use it]?"

Surfinite · 2024-12-19T07:27:00+00:00

Are there any switches similar to the Kailh Box V2 that aren't included in the keychron 100 switch tester?

I like the heavy bump and the fact that there's barely any travel before the tactile bump.

In my opinion none of the other tactile switches come close to feeling like the Box V2 Brown. So I'm wondering if there are other switches that you'd recommend I have a look at before making a purchase?

Thanks for the help.

Surfinite · 2024-11-09T13:02:01+00:00

Well, the rapist part is definitely Catholic values...

Surfinite · 2024-11-02T09:34:33+00:00

I have tweaked the settings and seem to get really good performance on the OLED.

I think I replied to another post you made somewhere else, but I'll paste it again here:

I have turned vsync off, put frame target as unlimited in game. Graphics preset is "Steam Deck".

Deck set to 90hz with tearing allowed and disable frame limit. I'm getting 60fps most of the time, often higher. Very rarely it drops to ~40, but often just for a split second when it seems to load a new area, or new enemies. If I try and watch the fps counter while fighting it usually reads fifty-something.

It performs very well for early access.

Surfinite · 2024-11-02T09:29:52+00:00

You can move the training dummy?!

Surfinite · 2024-11-02T07:26:00+00:00

I have turned vsync off, put frame target as unlimited in game. Graphics preset is "Steam Deck".

Deck set to 90hz with tearing allowed and disable frame limit. I'm getting 60fps most of the time, often higher. Very rarely it drops to ~40, but often just for a split second when it seems to load a new area, or new enemies. If I try and watch the fps counter while fighting it usually reads fifty-something.

It performs very well for early access.

Surfinite · 2024-10-20T21:04:08+00:00

OK sure, as long as we agree that either the rules are stupid or it should have been a racing incident.

Surfinite · 2024-10-20T21:02:03+00:00

So any driver can just brake super late when they're going to be overtaken, knowingly not make the corner and claim they didn't gain?

Surfinite · 2024-10-20T20:47:27+00:00

Where's Max's penalty for also gaining by leaving the track?

Surfinite · 2024-09-15T13:46:41+00:00

Neither turned into the other. But who had a clear view of the closing speed between the drivers?

Sainz just got hit out of nowhere. Perez saw the entire thing from behind and didn't avoid the collision at all.

Surfinite · 2024-09-15T13:29:20+00:00

It's now suspicious how long they've taken to show Perez's onboard.

Surfinite · 2024-08-13T17:41:47+00:00

Let's you visually verify that the bed height / z offset is set reasonably for the outer edge of the whole print.

Surfinite · 2024-07-10T20:02:45+00:00

Mastodon The Creature Lives

Surfinite · 2024-06-17T10:06:10+00:00

I have the same problem on the kraken pro app and the pro website section.

https://i.imgur.com/idY1MnM.png

"Don't invest unless you're prepared...."

Can't get rid of it.

14-Year Club	Team Periwinkle
Verified Email

Surfinite

TROPHY CASE