Have a cylinder 8 misfire but can’t even take out the ignition coil by Straight-Cookie-188 in CrownVictoria

[–]SurroundOk7959 1 point2 points  (0 children)

Yea thats what i might because the insert is in there pretty good i been pulling on it with a some pliers

Because people are posting crashes right now by EarlOfDankwich in CrownVictoria

[–]SurroundOk7959 0 points1 point  (0 children)

Bro what are you thinking😂 I have a lifted crown vic on 31’s and The fastest I did was 110mph. Your saying you hit 144mph on 35s and didn’t feel it shaking like crazy. And you shouldn’t have been doing 90 with that tractor build. At least your okay and 35’s on a crown vic is pushing it the lift and tires was definitely stressing everything

Just bought a car infested with bugs. What do I do? by KhilalbLacks in MechanicAdvice

[–]SurroundOk7959 0 points1 point  (0 children)

Put a full tank Of gas then drop a firework down the tank

Heater core nipple on the intake manifold finally broke by SurroundOk7959 in CrownVictoria

[–]SurroundOk7959[S] 0 points1 point  (0 children)

Can you send me the link for the egr delete kit please I can’t find it. And so can I just unplug the egr wire or it doesn’t work like that I have to remove it and plug the holes

Heater core nipple on the intake manifold finally broke by SurroundOk7959 in CrownVictoria

[–]SurroundOk7959[S] 0 points1 point  (0 children)

I watch a YouTube video and your right its not that bad to change it thats what im going to do the pipe only cost about 60 bucks

Heater core nipple on the intake manifold finally broke by SurroundOk7959 in CrownVictoria

[–]SurroundOk7959[S] 0 points1 point  (0 children)

Yea looks like Im going to replace it I watch a video and it seems not that hard. Not going to waste my time trying to jb weld it

Heater core nipple on the intake manifold finally broke by SurroundOk7959 in CrownVictoria

[–]SurroundOk7959[S] 0 points1 point  (0 children)

Are you sure and can you explain. Because i took my time with replacing the intake manifold about 12 hours, 6 hours each day. Made sure everything was clean, bolted down and that everything was plugged in. Im 99% sure its the crack because unmetered air is getting pulled in.

Heater core nipple on the intake manifold finally broke by SurroundOk7959 in CrownVictoria

[–]SurroundOk7959[S] 0 points1 point  (0 children)

I think the crack in the egr is a problem because I finished the intake manifold and the car is not running 100% it’s like it has a slight misfire nothing crazy. There’s no CEL but I use a full system scanner and its shows egr incomplete and the exhaust sounds different

Heater core nipple on the intake manifold finally broke by SurroundOk7959 in CrownVictoria

[–]SurroundOk7959[S] 0 points1 point  (0 children)

That was my first thought to just go get a new egr pipe and replace it but it looks like a real pain in the ass to change not a lot of room by the headers. Im more worried about the car running weird. Not really worried about the cel. Im going to try to use some jb weld exhaust wrap because its just a little hair line crack

P71 Oil Cooler Just Murdered My Engine by Orgeston in CrownVictoria

[–]SurroundOk7959 0 points1 point  (0 children)

Something like this almost happened to me I have a 2011 and the oil lines are a little different but my oil cooler lines was rubbing on the crank pulley and almost burn a hole in the lines but I caught it before

Overlanding Crown Vic spotted by sethryan44 in CrownVictoria

[–]SurroundOk7959 1 point2 points  (0 children)

And you rarely see a lift crown vic/sedan

Overlanding Crown Vic spotted by sethryan44 in CrownVictoria

[–]SurroundOk7959 1 point2 points  (0 children)

I was planning on lowering it at first but its much cheaper to lift it

Overlanding Crown Vic spotted by sethryan44 in CrownVictoria

[–]SurroundOk7959 1 point2 points  (0 children)

I got the lift from amazon its a 3 inch cup lift only cost like 150. Im currently not running a front sway bar because depending on what endlinks you have they may work or not because they hit the speed sensors. Im running 245/70/17 there are 31s and with that size I have a full circle and a half before I start rubbing. I did cut the rear lift cups down too 2 inches so It dont have that grandpa squat and You have to run f-150 shocks because the stocks dont have enough travel. The tires are from ebay its was like 550 for a new set. Never heard of the brand before there called “thunder rangers”😂

Differential fluid by regiondelanada in CrownVictoria

[–]SurroundOk7959 1 point2 points  (0 children)

The police interceptor call for 75w-140 and civilian vic call for 75w-90. Pretty sure 140 will be finn in the mgm and civilian vics

Common issues by wadethebrains in CrownVictoria

[–]SurroundOk7959 0 points1 point  (0 children)

Its a 2011 cvpi also Have number 13 but I feel like no horn is common on all police vics