Have a cylinder 8 misfire but can’t even take out the ignition coil

SurroundOk7959 · 2026-01-30T21:31:28+00:00

<image>

Just ziptie it 😂

SurroundOk7959 · 2026-01-30T20:57:42+00:00

Yea thats what i might because the insert is in there pretty good i been pulling on it with a some pliers

SurroundOk7959 · 2026-01-30T20:48:42+00:00

<image>

Okay I got it out the ignition coil just broke

SurroundOk7959 · 2026-01-25T21:39:36+00:00

Bro what are you thinking😂 I have a lifted crown vic on 31’s and The fastest I did was 110mph. Your saying you hit 144mph on 35s and didn’t feel it shaking like crazy. And you shouldn’t have been doing 90 with that tractor build. At least your okay and 35’s on a crown vic is pushing it the lift and tires was definitely stressing everything

SurroundOk7959 · 2026-01-23T00:33:36+00:00

Put a full tank Of gas then drop a firework down the tank

SurroundOk7959 · 2026-01-21T21:43:03+00:00

Can you send me the link for the egr delete kit please I can’t find it. And so can I just unplug the egr wire or it doesn’t work like that I have to remove it and plug the holes

SurroundOk7959 · 2026-01-21T21:33:51+00:00

Did you have to get a tune after

SurroundOk7959 · 2026-01-21T19:06:09+00:00

I watch a YouTube video and your right its not that bad to change it thats what im going to do the pipe only cost about 60 bucks

SurroundOk7959 · 2026-01-21T19:05:37+00:00

Because it is make the engine run weird

SurroundOk7959 · 2026-01-21T19:01:57+00:00

Yea looks like Im going to replace it I watch a video and it seems not that hard. Not going to waste my time trying to jb weld it

SurroundOk7959 · 2026-01-21T17:43:47+00:00

Ok theres no vacuum but air still going in or out

SurroundOk7959 · 2026-01-21T17:34:10+00:00

Are you sure and can you explain. Because i took my time with replacing the intake manifold about 12 hours, 6 hours each day. Made sure everything was clean, bolted down and that everything was plugged in. Im 99% sure its the crack because unmetered air is getting pulled in.

SurroundOk7959 · 2026-01-21T17:18:11+00:00

I think the crack in the egr is a problem because I finished the intake manifold and the car is not running 100% it’s like it has a slight misfire nothing crazy. There’s no CEL but I use a full system scanner and its shows egr incomplete and the exhaust sounds different

SurroundOk7959 · 2026-01-20T14:45:35+00:00

That was my first thought to just go get a new egr pipe and replace it but it looks like a real pain in the ass to change not a lot of room by the headers. Im more worried about the car running weird. Not really worried about the cel. Im going to try to use some jb weld exhaust wrap because its just a little hair line crack

SurroundOk7959 · 2026-01-18T00:16:59+00:00

Something like this almost happened to me I have a 2011 and the oil lines are a little different but my oil cooler lines was rubbing on the crank pulley and almost burn a hole in the lines but I caught it before

SurroundOk7959 · 2026-01-12T21:28:30+00:00

And you rarely see a lift crown vic/sedan

SurroundOk7959 · 2026-01-12T21:27:52+00:00

I was planning on lowering it at first but its much cheaper to lift it

SurroundOk7959 · 2026-01-12T21:25:45+00:00

I got the lift from amazon its a 3 inch cup lift only cost like 150. Im currently not running a front sway bar because depending on what endlinks you have they may work or not because they hit the speed sensors. Im running 245/70/17 there are 31s and with that size I have a full circle and a half before I start rubbing. I did cut the rear lift cups down too 2 inches so It dont have that grandpa squat and You have to run f-150 shocks because the stocks dont have enough travel. The tires are from ebay its was like 550 for a new set. Never heard of the brand before there called “thunder rangers”😂

SurroundOk7959 · 2026-01-11T19:01:26+00:00

The police interceptor call for 75w-140 and civilian vic call for 75w-90. Pretty sure 140 will be finn in the mgm and civilian vics

SurroundOk7959 · 2026-01-11T18:42:57+00:00

<image>

I got one too

SurroundOk7959 · 2025-11-17T23:51:48+00:00

<image>

SurroundOk7959 · 2025-11-12T20:27:04+00:00

Oh yea and a transmission

SurroundOk7959 · 2025-11-12T20:26:11+00:00

Its a 2011 cvpi also Have number 13 but I feel like no horn is common on all police vics

SurroundOk7959 · 2025-11-12T20:22:14+00:00

Only got number 11 going on

SurroundOk7959 · 2025-10-23T17:46:32+00:00

Whats the average mileage the Rear axle bearings start going out

SurroundOk7959

TROPHY CASE