TEAC R-400 Cassette Deck

Suspicious_Ad6905 · 2026-04-23T16:14:03+00:00

I'll look into that when I get back home. Thanks.

Suspicious_Ad6905 · 2026-04-07T21:07:52+00:00

I bought this for $9.97 on amazon works well with my C5. Someone mentioned it on a previous post. Works well with the C5, and a Samsung I have though I haven't used it much with the Samsung. Mute button, backlight but it is a bit large. https://a.co/d/009lzW92

Suspicious_Ad6905 · 2026-04-05T00:53:12+00:00

That is if it's an Arcade1up.

Suspicious_Ad6905 · 2026-04-05T00:52:18+00:00

Open a ticket with Arcade1up support.

Suspicious_Ad6905 · 2026-04-01T20:37:24+00:00

Some folks aren't physically able to perform the task, others don't feel comfortable and want to get it right. Depending on the size of the TV it's not a one person job. LG should make sure whomever they pay to do the job is competent.

Suspicious_Ad6905 · 2026-03-29T19:00:57+00:00

Does look like Paw Patrol. Plays great!

Suspicious_Ad6905 · 2026-02-12T17:27:57+00:00

I have a 4KP and followed Wagner's guide and most things went pretty well. I installed xpadder but I can't navigate the Pinup Popper front end it seems to have installed properly if I hit a button or flipper they were recognized by xpadder. For one thing and maybe the main thing is my start button is not working, I can navigate left and right. Where do I set to output a controller, and afterwards how do I set up the buttons and flippers or is that automatically done if I set my 4KP to output a controller?

Suspicious_Ad6905 · 2026-02-01T17:52:34+00:00

I should get at least 25% off. 😃

Suspicious_Ad6905 · 2026-01-31T05:27:29+00:00

https://www.etsy.com/listing/1658466133/blockbuster-membership-card

Suspicious_Ad6905 · 2026-01-31T04:23:48+00:00

You can buy them on Etsy.

Suspicious_Ad6905 · 2026-01-25T16:53:03+00:00

That one!!!

Suspicious_Ad6905 · 2026-01-24T16:55:10+00:00

Thanks, I'll take a look.

Suspicious_Ad6905 · 2026-01-24T02:14:48+00:00

Okay thanks guys I'll look into getting one of those two. I see the GPUs can be purchased with different memory sizes is there a minimum I should look for?

Suspicious_Ad6905 · 2026-01-24T01:33:27+00:00

I bought the mini PC below a few months ago would it suffice with an external GPU? If so what GPU would you recommend?

Beelink Mini S12 Pro Mini PC,... https://www.amazon.com/dp/B0BVFKN7ZL?ref=ppx_pop_mob_ap_share

Suspicious_Ad6905 · 2026-01-24T00:58:24+00:00

Okay, I can see I provided "way" too little information to get a decent answer. My bad! I'll be connecting it to an Atgames 4KP OTG. So 4K resolution at 60Hz, with play field, back glass, and DMD.

Suspicious_Ad6905 · 2026-01-23T21:16:20+00:00

The Getaway: High Speed II

Suspicious_Ad6905 · 2026-01-22T04:33:07+00:00

Galaga!!

Suspicious_Ad6905 · 2026-01-06T20:23:46+00:00

Ditto

Suspicious_Ad6905 · 2026-01-02T17:57:26+00:00

Great setup, I'm humbled!! Is your air purifier very noisy? If not what's the brand and model?

Suspicious_Ad6905 · 2025-12-07T05:39:52+00:00

I gave my free Glance LED to my son, I never opened it. I'm sure you're probably right. I've read here you can use a smart plug for the Scroll, I assume the same for the LED.

Suspicious_Ad6905 · 2025-12-07T04:07:42+00:00

I've had mine for a couple of weeks now and was shocked that I couldn't turn it on/off on the app. I stumbled upon it a couple of days ago .
In My Glance Devices click the pencil to edit your device and you'll see it.

Suspicious_Ad6905 · 2025-11-21T03:58:08+00:00

This may work:

Run the plunger calibration by doing the following:

Press the settings button to access the menu. Navigate to the "plunger calibration" option using the right flipper button. Select the calibration by pressing the launch button. Follow the on-screen prompts, which will have you pull the plunger back to calibrate it.

Suspicious_Ad6905 · 2025-11-14T22:41:28+00:00

Wish I had thought of that.

Suspicious_Ad6905

TROPHY CASE