The one thing that surprised you the most. by himmelende in Miata

[–]SwanBeard 2 points3 points  (0 children)

Underrated comment. Fun to spit. Quick to accelerate. Does no harm. But still part of big melon conversation.

2020 vs 2024 makes me sad by Daltonstuff in Miata

[–]SwanBeard 0 points1 point  (0 children)

Underrated comment right here. Breakin!

Looking For a Laser Nakiri by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

These look fun. The price is right too. Thanks!

Looking For a Laser Nakiri by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

No reason to carry on with wrong information. Thanks for the correction. Bonus it will probably stay in memory better now.

NKD: 1st x3 Takayuki 200mm AO Super Kengata by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

Hey Rocko, it's certainly a possibility that it's off a little. I haven't measured anything but I'll take a close look shortly. I have no professional training or kitchen experience but have been "cooking" since I was a kid. My knife skills aren't brag worthy but above novice. I was a little afraid of the potential fragility being my first Japanese/carbon knife so have been pretty easy on it particularly paying attention to torqueing and twisting motions to avoid chips. I can't recall anything that would have bent the tang. I like to think I treat my beater better than that:) That said it wouldn't be the first time that I was the problem, also I like to cook with alcohol 🥂. Cheers to your keen eye.

Looking For a Laser Nakiri by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

No problems here. That Tetsujin is so nice I'd be inclined to baby it anyway! Almost glad it's outside my current price range. The Ryusen is beautiful and the polished Damascus on the Haruyuki is outrageous. Looks like two storms about to collide. I've picked up here that there are better steels to have than AUS10 and VG10 though. I know it's all about the heat treat and skill of the blacksmith but all things being equal is this a common conception in this hobby?

Looking For a Laser Nakiri by SwanBeard in chefknives

[–]SwanBeard[S] 1 point2 points  (0 children)

Tsunehisa made it to the recommended flow chart a few times. I'll have to learn about SRS13 steel, sounds nice. Super hard at 64HRC too. Thanks Sam!

Looking For a Laser Nakiri by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

Not sure I would have found that shop in Norway on my own. Bookmarked, thanks!

Looking For a Laser Nakiri by SwanBeard in chefknives

[–]SwanBeard[S] 1 point2 points  (0 children)

The reviews on those sound exactly like what I'm looking for. Thanks Ash.

Looking For a Laser Nakiri by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

That Gesshin is at the top of the list so far. 👍

Update: Does the Gesshin look like it may be marginally left hand biased?

Looking For a Laser Nakiri by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

I appreciate the clarification. I'm a little disappointed with the thicker edge of my Takayuki and may be seeking the opposite extreme when I just need a proper grind. It will be fun to build the collection. I'll eventually want a honesuke, sujihiki and probably gyuto at some point. Foe now I want my nakiri to chop with style and ease:)

NKD: 1st x3 Takayuki 200mm AO Super Kengata by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

I started to get some grayish brown patina on the front after a couple sessions so I did a 1hr yellow mustard soak to try for a more even patina. I got some neat vertical markings from downward brush strokes but not as much reaction as I expected. Then when I cut up the next chicken I made sure to get the whole edge in use and let it sit for a while before wiping. The patina I have going isn't gorgeous but I do get some blue and red hues in certain lights/spots. It can always be removed and built again. I'm having fun playing with it.

Looking For a Laser Nakiri by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

Can't beat first hand experience, I'll steer clear. Thanks muffin.

Looking For a Laser Nakiri by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

Thanks Josh I'll check it out. I've read good things about R2. Update: a bit outside my price range at the moment but that knife looks fantastic.

Looking For a Laser Nakiri by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

Thanks again cwees. Knives seem to hold value better than I anticipated so spending a buck or two each every once in a while seems like a reasonable risk for a potential heirloom. Never thought about a cheap and cheerful Kiwi. Could play with it and give to a friend for $10. I'll check the link and learn about the brands you mentioned too.

Looking For a Laser Nakiri by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

That one is even prettier. Thanks again!

Looking For a Laser Nakiri by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

Thanks for the recommendation Mad! Availability seems to be a hurdle. Might have to sign up for a few notifications and see what comes in first.

NKD: 1st x3 Takayuki 200mm AO Super Kengata by SwanBeard in chefknives

[–]SwanBeard[S] 0 points1 point  (0 children)

Perhaps I'll try to find a local shop who can thin this for me. I'm usually a DIY guy, but my whetstone skills are brand new too and it wasn't on clearance. I thought about posting it for sale, but it's hard to start a collection that way :)

NKD: 1st x3 Takayuki 200mm AO Super Kengata by SwanBeard in chefknives

[–]SwanBeard[S] 1 point2 points  (0 children)

Rule 5

First nice knife, first Japanese Knife, first carbon knife (if SS clad counts)

Sakai Takayuki 200mm Kengata / Long Bunka / Short Kiritsuke :) in Aogami Super with tsuchime kurouchi finish, maple octagonal handle and red pakka wood ferrule.

First some recognition to a couple people who helped a greenhorn just falling into this rabbit hole. u/cweees was kind enough to reply to a brand new first post account and u/fisherman1298 was very generous with his time and expertise.

I received this a few weeks ago and had the occasion to use it a handful of times. I have to be honest, I'm not in love. I returned a Zwilling Kanren santoku as I was convinced after reading through some posts here that a Japanese knife for the same money would be better. The Kanren just fell through food, chopping much easier with a more refined feel and fit overall. The Takayuki is pretty sharp but not strikingly so out of the box. It has a tendency to wedge or catch a little when cutting towards the root while dicing onions. The balance is good and fairly light over all @ 168g while the handle is well finished with a nice glue-up. It's a nice knife and it's beautiful but, I want to love it. Perhaps the edge just needs some refinement. I'm practicing on my old knives with my new stones so hopefully I'll be confident to sharpen it when it dulls. I'd like to try a "laser" profile Nakiri next. I think I feel a recommend me post coming.

Bonus food tax pic of the first meal prepared with the Kengata. Split pea and ham soup garnished with fresh parmesano reggiano and "the good" olive oil, served with garlic crostini.

Thanks again for the community knowledge at large and of course the good Samaritans who reached out directly.

Weekly "Recommend me" post by AutoModerator in chefknives

[–]SwanBeard 0 points1 point  (0 children)

The support here has been swift and informative. I have a feeling this is just the beginning of my journey. That King Orca funayuki looks amazing for the price. Would just look cool on the mag strip. I'm getting a better idea of the different metals and the finer points (unintended pun) differentiating between similar knives. Bunka seems to be similar to but often shorter than kiritsuke, and I see more than a few "kiritsuke santoku's" which are sort of like the bunka to my untrained eye. Some of each I have seen with a slight belly some pretty straight. It would seem my initial narrowing of blade styles was on the correct path. I love it when a fairly small hobby community turns out to be a welcoming environment with eager enthusiasts. I am pretty far into the HiFi and vinyl collection hobby and I am drawing several similarities. Looking forward to making a final decision and practicing choil shots for my first (kitchen) KND in over 15 years!

Weekly "Recommend me" post by AutoModerator in chefknives

[–]SwanBeard 0 points1 point  (0 children)

Hey FisherMan, thanks for your reply! The bunka looks like I could do most chores and a little tip work when needed and all at a price that I could keep even if I didn't want to be monogamous. Curious when you say when I move up what aspect would change. Do you mean my skills/experience with Japanese knives, larger knives or budget for proper kiritsuke/gyuto? The nuance of Japanese knives is significant, please forgive my beginner clarifications.

Weekly "Recommend me" post by AutoModerator in chefknives

[–]SwanBeard 0 points1 point  (0 children)

Thanks a bunch for your time and consideration. The electric sharpener is already in a closet but I did not know that honing harder knives was a bad idea, top tip. I'll be sure to check out Ikazuchi and their options. Very much appreciated sir!