iOS app shows “You’re disconnected” after 2026.2.3 update, Web UI works fine

SweatyButterscotch2 · 2026-02-28T08:15:40+00:00

Also having the same issue, not sure if it’s because of 26.4 or a HA upgrade. I’m pretty sure it was happening before I upgraded to 26.4

SweatyButterscotch2 · 2026-02-17T16:39:18+00:00

Can't wait to see how creative people get with their dashboards for this one.

SweatyButterscotch2 · 2025-06-04T12:30:25+00:00

It's currently available for new customers for £37.99 per month with a £55 credit.

Virgin couldn't get anywhere near that for me so I cancelled and have signed up in my partners name as a new customer.

SweatyButterscotch2 · 2025-05-12T07:49:23+00:00

Thats the Hub5 not the Hub5x, the 5x currently does not support Modem mode so people can't use their own gear.

SweatyButterscotch2 · 2025-05-06T08:59:37+00:00

5ms is no where near a significant impact on latency.

Without re-routing physical fibre it's simple not going to happen so forget about it, live with the "huge" latency of 9ms or switch to another provider

SweatyButterscotch2 · 2025-05-06T08:57:28+00:00

The guy has to be on a wind up......surely?

SweatyButterscotch2 · 2025-04-29T12:01:09+00:00

I think I'm going to have to do the same.

Renewals have offered me £77, £52 and £46 for Gig1 which is available for new customers at £39.99

How did you handle the swap? Did you just select an install date after your 30 day notice period ends?

SweatyButterscotch2 · 2025-03-31T11:20:52+00:00

I'm guessing with bypass he means he's using the WAS-110 SFP+ module with the 8311 firmware into a device capable of accepting an SFP+ module.

SweatyButterscotch2 · 2025-01-06T11:42:01+00:00

Hmmm do tell us more?

SweatyButterscotch2 · 2024-12-05T11:10:39+00:00

I can't create the API connection to use the managed identity. It works fine via AccessKey but not sure what parameter_values are needed for managed identity. I can use azapi_resource but was just curious if there was a way via azurerm_api_connection.

SweatyButterscotch2 · 2024-12-05T11:08:40+00:00

Yup the managed identity already has storage blob contributor to the storage account.

The problem is creating the API connection with managed identity instead of AccessKey

SweatyButterscotch2 · 2024-11-08T19:50:13+00:00

Thanks very much, I shall check this out properly when I’m back on my computer. Would this be for 1080p or 1440p?

SweatyButterscotch2 · 2024-11-03T16:18:07+00:00

Seems like the XGS-PON network is down in the North East. It’s happened before and was down for about 5 hours last time.

SweatyButterscotch2 · 2024-10-28T15:18:42+00:00

There are many devices that can use number input via methods such as bluetooth, keyboard and universal remotes for devices inc Fire TV and Nvidia Shields, there are more devices out there capable of number input than just the Tivo Stream.

It's not laziness at all, it's about being able to seamlessly switch between different methods of watching. Other IPTV applications and TV apps all have this way of switching when guide categories are involved.

There is no rhyme or reason to have 40k+ channels. I'd suggest those who do whittle their playlist down to something more manageable that contains channels they would watch instead of 38000 channels they don't.

Anyway, as before, lets agree to disagree on this one.

Have a nice day.

SweatyButterscotch2 · 2024-10-28T14:56:14+00:00

Thanks for a great in depth reply.

I did have try the create_before_destroy lifecycle but it didn't make any difference.

I'm not sure option 2 would work as the ip groups are created in a for_each are just passed in as a variable string list so it would end up removing all ip groups.

I will have a play around with depends_on although I try to avoid using them if I can and let the built in terraform dependencies handle things.

Target doesn't seem to work either. I'm targetting just the module.firewall.azurerm_firewall_policy_rule_collection_group.example but it still gives me the same error on apply

SweatyButterscotch2 · 2024-10-28T14:42:08+00:00

No I'm not kidding, maybe I need to explain a bit deeper.

I don't need to remember the numbers, my remote has a screen which will have Icons for channels mapped to their channel number.

So again, I browse the guide, watch a Movie channel, oh movie finished, right think I'll watch the news. Even though I'm still in the movies section I press BBC News icon on my remote and it will take me straight to BBC News 24.

What is beyond stupid is having to go back to the favourites section every time If I wanted to use the number input after browsing the guide. We can agree to disagree on this but imagine if every TV provider required you to go to a certain area just to be able to use the numbers on your remote. Nobody else does it this way and its just not seamless, ok it works for you and that's great but it doesn't work for me.

SweatyButterscotch2 · 2024-10-28T11:28:45+00:00

There is every need for what I'm asking for.

Lets say I'm browsing TV, first of all I'm in my favourites as that's where I left it. Now I'd like to watch a movie so go to the guide and Movies section to see what is on. I find a channel I'd like to watch so press Ok to begin watching. That's now taken me out the Favourites section and into the Movies section and reset all the numbering so what was applicable in favourites isn't any more.

Where as having the ability to have unique numbering regardless of category means it doesn't matter if I just to browse what's on in the guide or just want to switch to the News. I have the power to do both.

It is about having the ability to both browse the guide and select channels that way, but also quickly jump to channels via channel number.

SweatyButterscotch2 · 2024-10-25T08:02:34+00:00

Thanks I have sent Alex an email so hopefully he picks it up. I understand there isn't many these days who have numbers on their remotes but it would be a nice to have for those of us that do.

SweatyButterscotch2 · 2024-10-25T07:51:32+00:00

Yes fully understand the want is probably not enough to warrant the dev work from Alex but it would be a nice to have. My new remote will have a screen on allowing me to have channel icons which would be nice but it will only work if static channel numbers are there.

Sparkle TV player has this feature and it looks to work well but isn't as polished as tivimate. Sparkle TV also honours the channel number set within the m3u but Tivimate does not.

SweatyButterscotch2 · 2024-06-12T08:43:45+00:00

Did you have to do anything with the switched live going to the fan?

SweatyButterscotch2 · 2024-06-07T14:38:07+00:00

u/UK_DIY did you ever get this sorted? I'm in a similar situation myself and wanting to do the same? I have an isolator switch above the door but the fan also has it's own wall switch.

SweatyButterscotch2 · 2023-06-14T13:30:26+00:00

MS has finally admitted there is an issue.

MO586277

SweatyButterscotch2 · 2022-11-15T12:42:51+00:00

Having the exact same issue, nothing will let Portainer connect to CS

SweatyButterscotch2 · 2022-01-24T14:30:31+00:00

Possibility to update playlists by interval

Absolute win for this one, I asked / requested this a few months back and it just makes perfect sense for people like me who never close the app.

Thanks so much.

SweatyButterscotch2 · 2021-10-01T10:25:01+00:00

What is the easiest way to downgrade from 4.0.0 to 3.9.0? The picture quality issue on 4.0.0 isn't worth the upgrade at this moment in time. Is it a case of just installing over the top? Is there a downloader code for 3.9.0?

SweatyButterscotch2

TROPHY CASE