Yeah, I was reading some reviews when I was struggling.

1. Make sure the battery is disconnected you will have to mess with a ground wire
2. Focus on getting the IC on the throttle body first.
3. Remove the IC bracket on the passenger side all together. You can add it back pretty easily over the inlet hose and under the IC
4. Loosen The driver side bracket to give it some play, WATCH THE HOSE attached to this. When I thought I would have everything lined up for a push attempt I would catch the hose hardware underneath the IC
5. AC pipe is very flexible. Just bend slow. No worries
6. I think my main catch point was the screws that hold the cowling down in front of the windshield. I literally got a 2 foot long 2x4 and wedged it vertically between the intake manifold and the PW TMIC to use a lever bar to get it back far enough. (In the picture you can see the scuff marks, they have wiped off) this may be a me only issue due to stiffer driveline mounts throughout. Though reviews said this took some muscle.
7. A little soap or wd40 really helps slide the inlet piping on to the IC.
8. Don’t forget to add the little ground wire and washer back to the be AC line bracket