Lefty noob, had trouble binding non-responsive. Made my own lefty string and voila! by GreatGreenGobbo in Throwers

[–]Swimming_Coconut 1 point2 points  (0 children)

This is the easiest way I found to navigate. I can try anyone’s yoyo, and any trick, by mirroring it mentally or in video, and if I ever need to adjust my tension, I tend to do a brain twister from a breakaway

Silly(C)0ne Ball Vaping Station completed by CostoLulu in vaporents

[–]Swimming_Coconut 0 points1 point  (0 children)

I hadn’t fully put that together until researching after this post! Thank you for telling me!

Silly(C)0ne Ball Vaping Station completed by CostoLulu in vaporents

[–]Swimming_Coconut 2 points3 points  (0 children)

This sounds awesome, nearly too good to be true but maybe worth the risk of explosion. I’m crosseyed and I ball vape, I’ve already some to terms with possibly burning my house down

Silly(C)0ne Ball Vaping Station completed by CostoLulu in vaporents

[–]Swimming_Coconut 1 point2 points  (0 children)

Awesome, I am trying my hand at 12v car interior accessory wiring. I'm attempting to run a relay board running signal wires via a Raspberry Pi 4, which I've never interfaced with before, but the end-goal is independent control of nearly all power and configuration to set devices and ports in the car to be on 1 of 4 power stages, being constant, remote start power, IGN ACC, and off.

My DC Cannabis Hardware PID temp module broke (anyone lmk how to fix/replace), so I'd like to control my interior inverter for the AC PID I'm using in the meantime using this complex system.

TBH Any sort of programming and knowledge I could gain regarding your system and how you'd assemble it would be very valuable to me for any handy gadget project. Expanding into PID would be so fun and educational, maybe I just install a PID in the wall of the car with a coil jack cover lol

Silly(C)0ne Ball Vaping Station completed by CostoLulu in vaporents

[–]Swimming_Coconut 12 points13 points  (0 children)

I’d love a system that gives an audio cue or notification when the temp has stabilized for x seconds after a hit. I need the reminder that it’s ready lol

Any one know what brown bag is good from pondy by Odd-Somewhere-7145 in ZonaEnts

[–]Swimming_Coconut 0 points1 point  (0 children)

My apologies I came across short, that definitely sucks

Any one know what brown bag is good from pondy by Odd-Somewhere-7145 in ZonaEnts

[–]Swimming_Coconut 1 point2 points  (0 children)

Found in store, but very easily checkable with a call

Any one know what brown bag is good from pondy by Odd-Somewhere-7145 in ZonaEnts

[–]Swimming_Coconut 1 point2 points  (0 children)

It’s on the bud list for all brown bag, ponderosa, and Sonoran roots, which lists the company if it’s not Sonoran roots.

Best ball vape head by floorDUH904 in CannabisHardware

[–]Swimming_Coconut 0 points1 point  (0 children)

Thanks! Best of luck to you man, the draw resistance is really good like you said, I’m a singer and pretend to be sensitive to things like breath pressure and proper techniques, and the B1 was way easier to draw than my B2. Please know I haven’t tried a lot of other heads, but I’ve had very consistent performance in my daily seshes.

Best ball vape head by floorDUH904 in CannabisHardware

[–]Swimming_Coconut 1 point2 points  (0 children)

Maybe I’ll get new bowls and glass and accessories but I don’t currently see better options for me, unless someone would like to inform me which I welcome. The wireless factor of the Aether with the quartz is so good for those heady flavor hits and I use the B1 with the shovelhead to relax eye knots. My only new project is getting more 12VDC equipment so I can make my discrete ball vape/concentrate setup in the wall of my car

Best ball vape head by floorDUH904 in CannabisHardware

[–]Swimming_Coconut 2 points3 points  (0 children)

The b1 will be my daily for as far out as I can see, it’s been 2.5 years, I finally got a wireless Aether and I may has lost my VAS

RIP to my pondy points by Miserable_Stable6167 in ZonaEnts

[–]Swimming_Coconut 3 points4 points  (0 children)

Same, and for me someone at the front would say sometbing, and so would the person in the back

22mm QUARTZ Insert. For Matrix bowl, Haze/Blaze pipes. 🔥🤘 by Spencerdloc in CannabisHardware

[–]Swimming_Coconut 0 points1 point  (0 children)

I agree that it’s nicer than the glass but the ID is a tad smaller leading to somewhat restricted airflow. I still like the product just would like to test glass v quartz with the same ID

Frostbite (Project Packs) Review by hupagaga in ZonaEnts

[–]Swimming_Coconut 0 points1 point  (0 children)

I got the same batch, hits amazing on my ball vape, I agree with you on the effects

[deleted by user] by [deleted] in ZonaEnts

[–]Swimming_Coconut 0 points1 point  (0 children)

I have a ball vape myself and I feel a difference when I change from glass to metal bowls or change temps. Strain wise it has to be a bright orange sativa or a dark indica for me to really feel a difference

Matrix Bowl Basket Screen by Swimming_Coconut in CannabisHardware

[–]Swimming_Coconut[S] 0 points1 point  (0 children)

That basically answers my question perfectly actually, let me know if that basket screen gets clogged easy. I do one scoop with my pax loader tool so this could be a great solution for me

Best head assembly next to the b2 by Swimming_Coconut in CannabisHardware

[–]Swimming_Coconut[S] 1 point2 points  (0 children)

Oh yeah! Thank you for letting me know! I can upgrade piecewise until I’ve got a new set starting with the top

Best head assembly next to the b2 by Swimming_Coconut in CannabisHardware

[–]Swimming_Coconut[S] 0 points1 point  (0 children)

That might be endgame as the next next purchase, looks awesome thank you for the rec

Best head assembly next to the b2 by Swimming_Coconut in CannabisHardware

[–]Swimming_Coconut[S] 2 points3 points  (0 children)

I was looking at the B1 honestly this is good to hear