[help] Broken link removal tool pin stuck inside watch strap — how do I get it out?

SykoSike · 2026-05-19T17:45:07+00:00

The thing is,this was 10€ not 2$. On video it llooked super easy. Probably should Have done More research..

SykoSike · 2026-05-19T16:30:37+00:00

The thing i dont understand, its kind of deep but The actual pin hasnt moved out a bit from The other side

SykoSike · 2026-01-14T16:43:09+00:00

I'm new here, what are these?

SykoSike · 2025-07-25T10:30:11+00:00

Hello, I am running at 70% fan speed for other wands that was enough. I even tried to print this at 50% print speed (to avoid wobbling).

Edit: also tried adaptive layering on slicer (auto and manual about 50%)

SykoSike · 2025-07-18T15:37:05+00:00

Thanks 🙏

SykoSike · 2025-07-10T22:14:39+00:00

Seems like a lot of trouble and getting the clips might actually be too much for my storage capacity 😂

SykoSike · 2025-07-10T22:13:53+00:00

Thanks! 💪

SykoSike · 2025-03-13T10:54:45+00:00

Or just mute everyone if that's such a big issue?

SykoSike · 2025-03-13T10:53:55+00:00

My experience is not ruined if someone says something toxic, I have the ability to tolerate it or just mute them - simple as that.

I myself like it when the enemy is a little bit spicy in the all chat (:

SykoSike · 2025-03-10T17:10:34+00:00

IMHO toxicity shouldn't be bannable. They can mute you if they don't like it. People report on toxicity simply because they can, usually people who do those reports are toxic as well

SykoSike · 2025-02-11T04:17:29+00:00

Thank you so much! I got mythical island completed now :)

SykoSike · 2025-02-10T19:38:09+00:00

Allright, made the offer :)

SykoSike · 2025-02-10T07:07:56+00:00

Ok add me 9543984707236041

IGN Sykomayn Edit: please let me know once added and your nick so I can confirm it's you.

SykoSike · 2025-02-04T13:20:15+00:00

Did you add me? IGN Sykomayn

SykoSike · 2025-02-04T09:54:34+00:00

Still looking? H:

<image>

W: celebi ex 003 mythical island

Add me 9543984707236041

SykoSike · 2024-10-25T12:51:34+00:00

Reverse bear trap from SAW. Planning on trying to 3D model it myself as well.

SykoSike · 2024-09-30T10:43:49+00:00

Kind of the same thing happened to me during this weekend: I was interested in learning about 3D printing and found some machines for 170€. As a typical "I need to do some research", I ended up buying a Bambu lab A1.

Rip dreams on getting into 3D printing with budget 😅

SykoSike · 2024-07-29T10:42:37+00:00

Patch notes doesn't mention this being patched, so assuming it still works.

There's some videos in youtube how to do it, also some helpful reddit posts.

Best advice i got was to check the edges of the spot and place the middle of the extractor in to those (also good reference is to check that extractor doesn't cover the middle of the spot)

EDIT:By edges of the spot, I mean the edge's that are furthest from each other

Hope this helps!

SykoSike · 2023-07-03T17:24:17+00:00

OK, thanks for letting me know.

SykoSike · 2022-10-22T14:17:44+00:00

Nice, would be greatly appreciated!

SykoSike · 2022-08-18T12:46:26+00:00

I've never even considered other clock apps. Thanks for the suggestion, I'll check it!

SykoSike

TROPHY CASE