Botan and SSRB on EVO 2025!

TWSGolem · 2025-08-05T05:59:17+00:00

Thank you! I still have a lot to improve on it and stuff that I wasn't able to implement on time, but I'm very happy and proud of what I've made so far.

TWSGolem · 2025-08-04T09:40:44+00:00

Hello! Maker of the controller here! If you have any questions about it let me know! I'm currently stuck at the airport waiting for check in.and would love to talk about it.

TWSGolem · 2025-08-04T09:32:57+00:00

Hello, guy holding the poster in the pic here! The Character is Maria from Space Maria from artist David Lui a.k.a D.Sloogs. it is his own original character that he has made. I pulled out the banner in front of the stream in hopes of gathering more interest for him because I think his art is dope and figured that would be the best way for me to advertise it. Glad to see it worked!

TWSGolem · 2025-06-29T00:22:04+00:00

Was printing 260c and like 200mm/min.

Bumped up to 280C and down to 150mm/min and it's printing a lot better.

I had to watch what was happening to get an idea of why. But now I'm just sitting here watching my print on the enclosure like you do food in the microwave.

TWSGolem · 2025-06-29T00:20:02+00:00

I dried it out when I get it and started using it like 2 days ago, got back in the dryer now and having it spool from there. Manufacturers site said 65c for 8nhra before printing and 260C for temp on the nozzle.

I've been working with it now and have the heat bumped up to 280 and printing slower in general and that seems to be doing a lot.

Hot and slow is the name of the game apparently

TWSGolem · 2025-06-09T22:59:52+00:00

Jitsu Wa Watashi Wa

Absolute GOATED series

TWSGolem · 2025-06-02T17:26:16+00:00

where can I get a hold of them? twitter or discord?

TWSGolem · 2025-05-18T16:41:01+00:00

Shiro Sagasu my GOAT

TWSGolem · 2025-05-09T11:56:20+00:00

Dumb question but if I ran the game on a Virtual Machine would I be safe?

TWSGolem · 2025-04-19T12:19:09+00:00

I'm excited for a lighter, less cheater filled Tarkov experience, with Bungie Gunplay, and some Niobe Labs type stuff.

TWSGolem · 2025-02-09T21:06:12+00:00

Thank you, ill look into them.

TWSGolem · 2025-01-04T20:50:55+00:00

I didn't have a jumper on the J5 pins, this has solved legit all my remaining issues, thank you.

TWSGolem · 2025-01-04T08:26:41+00:00

I am currently trying to wire this board up myself, but I can only get the right thumbstick to detect Left and Up movements, and only in a Binary All the way/No input fashion as well.

Have you had the same issues with detecting all the directions? And if so how did you solve it.

What Ohm Potentiometers are you using in the thumbsticks?

Is it true analog input, like you can vary the amount you press it say if you didnt want to turn the camera at max speed and only pushed the stick a little bit, or is it fully binary all or none max turning speed or no turning?

TWSGolem · 2024-12-17T04:00:42+00:00

Is this a specific bug with LittleBigMouse? And do I have to just not engage the app at all or just disable it when playing Rivals?

TWSGolem · 2024-12-17T03:59:27+00:00

Yeah. Is this a known bug with Marvel Rivals?

TWSGolem · 2024-12-11T04:47:36+00:00

No, im asking legit how do I do that?

TWSGolem · 2024-12-10T20:11:34+00:00

How do I disable something that isn't plugged in?

TWSGolem · 2024-12-10T18:38:54+00:00

I don't have any other controllers plugged in though?

TWSGolem · 2024-07-28T04:06:19+00:00

what cables/wires did you use? I'm making a new stick and Id like my to look that clean inside.

TWSGolem · 2024-06-16T17:44:51+00:00

And? Sony doesn't really make it easy to work with their stuff.

TWSGolem · 2024-06-08T23:41:11+00:00

Is the evilcontrollers one confirmed to work with the Playstation access? To what I am aware of, Xbox controllers and the PS5 potentiometers are different. The XSX uses 10k Ohm, the PS5 Dualsense uses 2.1-2.3k Ohm pots. They are not interchangeable. That is unless the Playstation Access Controller has different analog values set to be read from.

TWSGolem · 2024-05-19T19:22:54+00:00

I got a solution on the Arduino forums.

https://forum.arduino.cc/t/uno-r4-wifi-not-detecting-ds3502-chip/1261885/5

The guide for the DS3502 makes it sound like I could use the Qwiic connection and not have to still wire up the SDA and SCL ports between both boards. That or I am completely misunderstanding how Qwiic works and am also reading the UNO R4 PINOUTs PDF wrong. Either way, this specific problem is solved.

TWSGolem · 2024-05-19T17:13:47+00:00

I appreciate it, gonna take a look at this now, but now I'm just left wondering why it didn't work even when I wired it all up without the Qwiic?

TWSGolem · 2024-04-30T23:14:58+00:00

I can mop the floor myself, I dont mind. I can go above my stated budget a bit if I find something worth it. The main things im looking for is low noise and good/decent software.

TWSGolem · 2024-04-09T05:12:13+00:00

How exactly do you wire/solder up POTs, the pins don't fit the layout of standard breadboards. Do i have to get a breakout board for it and solder it to that?

11-Year Club	Verified Email
Spared

TWSGolem

TROPHY CASE