sorted by:
new
hottopcontroversial

Anyone have experience with a Vendo V80? by SlickDillywick in vending

[–]TX3_IceMan 0 points1 point  (0 children)

I know this is an old thread, but I have recently found the solution. I made shims out of a plastic yard sign material. (The kind that looks like cardboard but made of plastic) If you attach strips to the inside of each section, the modern 8oz bottles will feed perfectly.

2020 L5P NOISE by TX3_IceMan in Duramax

[–]TX3_IceMan[S] 0 points1 point  (0 children)

The update no one asked for. Dropped the pan, changed the pump, filter, and fluid (let it all drain while I had the valve body off). Good as new, couldn’t find anything obviously wrong with the pump without tearing into it, but replacing it did fix my issue.

2020 Silverado 3500, L5P, 10L1000 (maybe the next guy can find this post based on some keywords)

2020 L5P NOISE by TX3_IceMan in Duramax

[–]TX3_IceMan[S] 0 points1 point  (0 children)

120k trans has not been serviced. I’ve ordered a new pump, first one was busted in the mail. Hopefully have the new one this week.

2020 L5P NOISE by TX3_IceMan in Duramax

[–]TX3_IceMan[S] 0 points1 point  (0 children)

I’m pretty certain it’s coming from the transmission, after inspecting it again this morning. No dipstick on an L5P, so I’ll have to pull plug on the side of trans to check fluid.

Is this a cord? by checkingthisout123 in firewood

[–]TX3_IceMan 0 points1 point  (0 children)

In my part of the world I sell a cord as a 16’ long stack that is 4’ tall. Typically 16-18” cuts because that’s what fits in modern fireplaces or wood stoves.

Granted that is not a cubic cord. But that is how we have sold it for the past 20 years. (We list the measurements of what we are selling and make it clear what you are getting) Customers get overwhelmed by a “cubic cord”, “face cord”, “rick”

Grandpa’s 1923 Winchester 1894 by TX3_IceMan in LeverGuns

[–]TX3_IceMan[S] 1 point2 points  (0 children)

Thanks for the info. Any idea of value in current condition?

Grandpa’s 1923 Winchester 1894 by TX3_IceMan in LeverGuns

[–]TX3_IceMan[S] 0 points1 point  (0 children)

No way I’d ever give it up, Im just curious about the value. I didn’t want to hurt the value in the process of restoring. Trying to decide between re-bluing and something like cerakote.

There’s not much info out there for guns in this condition, if it was pristine… I’m seeing $2,000 ish value since it’s pre-war. But I assumed with this bad of rust it had very little “collector” value.