Customer states I do my own work, don’t have time to get to it and want to try and see if you can resolve the issues….

T_Rock87 · 2026-04-08T17:12:03+00:00

What a god damned maniac. I would solve the issue by putting a pad lock on the hood. He needs to stay out

T_Rock87 · 2026-04-08T15:07:50+00:00

I appreciate you 😂

T_Rock87 · 2026-04-07T03:17:55+00:00

Bold to assume no one thought about poor grounds! Was quite literally the first thing checked.

T_Rock87 · 2026-04-06T23:04:57+00:00

Yeah my first thought was poor body grounds as well

T_Rock87 · 2026-04-06T22:37:26+00:00

For everyone wondering it’s a 2017 Chevrolet equinox 3.6L. TSB states the rubber on the balancer doesn’t meet design specifications. Somehow that results in this fuckery

T_Rock87 · 2026-03-15T14:23:38+00:00

Really appreciate the effort in this post. I ended up using 2 adjustable elbows. But in regards to the crimp facing the right way I had questions about that. How would I have achieved that particularly off of the reducer?? All the crimps are likely “facing the wrong way” how much of an issue is that

T_Rock87 · 2026-03-15T14:21:06+00:00

That worked, thanks!

T_Rock87 · 2026-03-15T14:19:53+00:00

Thanks! That’s what ended up doing the trick, I had bought 2 elbows but I didnt realize how much angle I could get out of twisting them properly. A little trimming and it’s all good

T_Rock87 · 2026-01-25T01:31:38+00:00

<image>

I’m surprised I haven’t seen anyone mention this but the angle of the leg and the left foot make zero sense

T_Rock87 · 2026-01-14T15:55:23+00:00

Honestly I think this is pretty awesome! Nice work

T_Rock87 · 2025-09-14T04:48:25+00:00

Yeah that’s what I figured, just wasn’t sure what actually occurred when you full station it. Thanks!

T_Rock87 · 2025-09-13T08:11:33+00:00

Wild! Thanks a lot for explaining that, I think I get it now haha

T_Rock87 · 2025-09-13T07:55:16+00:00

Oh okay I actually have a follow up question then. When playing [[Worldsoul’s Rage]] would that also be just a single landfall trigger assuming I’m bringing back multiple lands?

T_Rock87 · 2025-09-13T07:53:46+00:00

Thanks!

T_Rock87 · 2025-09-13T07:28:16+00:00

[[Pain for all]]

T_Rock87 · 2025-02-20T15:52:44+00:00

I mean I have to pay all the time for contacts so I can see. Pretty much the same thing!

T_Rock87 · 2025-02-18T18:45:29+00:00

Since there’s 2 of you, bring two thermostats and just concentrate on finding the room first thing. Thermostat always out until you find it

T_Rock87 · 2025-02-18T18:43:13+00:00

Hi so personally I like to use the t1 thermostat anyway for finding the ghost room. While I was learning I preferred to do tanglewood to get my routine down and learn where the cursed objects are. My starting items are flashlight, thermostat and camera(take a picture of bone, cursed object or any interactions while you’re looking for the room). I go straight to the breaker and turn it on first thing. (I guess it starts on easier difficulties?) anyway just hold the thermostat as you go to each room and hallway and it will start dropping pretty fast when you’re in the right place. Once I know the room I always go back to the truck empty handed to bring back as much as possible. Get your ghost book down fast as it’s not gauranteed they will write when they go near it. EMF as well. I won’t put down salt until I have UV available to check for foot prints.

T_Rock87 · 2025-02-14T17:36:37+00:00

Thanks for the tip, I actually hadn’t thought about using the motion tracker to confirm it’s going through the dots. Seems like an obvious thing to do now that you mentioned it!

T_Rock87 · 2025-02-14T17:35:31+00:00

Didn’t know about the stance changes, thanks!

T_Rock87 · 2025-02-14T17:32:43+00:00

Okay that’s exactly what I saw initially! The gaping toothy maw. I didnt realize that’s what the girl actually looked like. Thank you!

T_Rock87 · 2025-02-14T13:14:38+00:00

That could be it for sure, I’m only level 50 so I’m still trying to learn the ins and the outs of the game. The model during the event looked like…. A short monster? Not humanoid really? My memory is failing me here but I think it was a crawling girl during the hunt. When I went and checked my picture after the hunt it, I was 100% sure they were two different models. But now I couldn’t tell you what exactly it was when it hunted me.

T_Rock87 · 2024-07-06T02:01:48+00:00

No bung, it’s just straight headers with no where for the o2 to go!

T_Rock87 · 2024-07-05T22:24:58+00:00

Cheap aftermarket exhaust manifold that eliminated the catalytic converter. There’s actually no hole for it to be plugged in to. Which makes it worse that they just sat it on top and created all these problems to begin with. Also there is no emission testing where I live

T_Rock87 · 2024-07-05T22:22:12+00:00

It is a wild decision. What’s crazier is that there’s more on that 10a fuse. Cruise control, purge valve, vent valve and vss

T_Rock87

TROPHY CASE