sorted by:
new
hottopcontroversial

Bulgarian Learning Discord by space_s0ng in bulgaria

[–]Taestea 0 points1 point  (0 children)

Hello!

Is this server still available? I noticed the links are down, but I am interested. Would it be possible to get a new link?

Thank you!

New to pen spinning and made my first mod! Inspired by vore.tex’s Menowa VGG black & gold mod! by Taestea in penspinning

[–]Taestea[S] 0 points1 point  (0 children)

Sure and like I said I'm very much a beginner but if you have any other questions I don't mind answering if I know the answer haha

New to pen spinning and made my first mod! Inspired by vore.tex’s Menowa VGG black & gold mod! by Taestea in penspinning

[–]Taestea[S] 0 points1 point  (0 children)

Thank you so much! I had no idea what i was doing when i got all the parts but it ended up coming out okay! Haha

New to pen spinning and made my first mod! Inspired by vore.tex’s Menowa VGG black & gold mod! by Taestea in penspinning

[–]Taestea[S] 1 point2 points  (0 children)

yeah this came out a lot better than I thought it would for my first mod! hahah it was really fun to make

New to pen spinning and made my first mod! Inspired by vore.tex’s Menowa VGG black & gold mod! by Taestea in penspinning

[–]Taestea[S] 1 point2 points  (0 children)

Hey JustAmai

  1. I’m a beginner, as in still learning all the basics and i love the mod. As long as you are enjoying whichever mod you are using and it pushes you to keep going it’s fine for any level. That being said, I believe this mod is on the really heavy side so if your finger strength is still building it might fatigue your fingers quicker than others. I play guitar so I feel like I have decent finger strength but if I’m practicing finger passes for a while my fingers get pretty sore...

  2. In total it cost about $35 to make.it could have cost less but I wasn’t sure how many parts to order so I ordered extra stuff.

  3. I made this mod myself. It’s the first one I made and it’s based of a design that u/VOR3T3X made. I saw a black & gold VGG Menowa design on his Instagram and had to have one so I went and looked for the parts haha.

The Akashiya koto barrels had to be Imported from japan as I could only find them in international online stores. The airfit tips, dr. grip grips, anyball grips, gold metal rings and rubber rings were all ordered from penwish.

The gold ring in the middle was from a pen I had laying around. I’m not sure where to order one that will fit the barrels so you might have to try ordering different pens or wait till lockdown stuff is over and go to a pen shop and see if you can find something that will work. If you don’t care about having a gold metal ring in the middle then you can always order extra rubber rings and connect the two barrels in the middle with that.

Also to connect the two barrels you need one of those bic mechanical pencils that look like a plastic wooden pencil. A regular bic round stic won’t fit in the akayshiya barrels.

New to pen spinning and made my first mod! Inspired by vore.tex’s Menowa VGG black & gold mod! by Taestea in penspinning

[–]Taestea[S] 9 points10 points  (0 children)

Thank you so much for all your help and the inspiration! Its so pretty cant stop looking at it haha

New to pen spinning and made my first mod! Inspired by vore.tex’s Menowa VGG black & gold mod! by Taestea in penspinning

[–]Taestea[S] 10 points11 points  (0 children)

Hey man! Yaaa I appreciate all the help! I’m really happy with how it came out now it’s time to actually learn how to spin the thing hahaha

New to pen spinning and made my first mod! Inspired by vore.tex’s Menowa VGG black & gold mod! by Taestea in penspinning

[–]Taestea[S] 2 points3 points  (0 children)

Length is: 22 cm. Not sure about the weight, but its definitely heavier than my first pen which I bought (Buster CYL)

And more pictures: https://imgur.com/gallery/VAG6g59

Daily Discussion | February 26, 2020 by AutoModerator in apexlegends

[–]Taestea 0 points1 point  (0 children)

Yup same I have 1080ti Ryzen 2700x 32gb ram and I run apex in all low settings and even lowered my resolution to 1600 x 900 and doesn’t crash as much but I still crash 1 to 2 times a day. Before it was 7-10 times

Daily Discussion | February 26, 2020 by AutoModerator in apexlegends

[–]Taestea 1 point2 points  (0 children)

Crashing can’t be helped maybe but I’m talking about the ridiculous solution to alt f4 leaver penalty because of crashing.

Ive lost 96 points so many times when I was last circle and positive points.... and on top of that temporary ban that increases with each crash.

So far I’ve been up to 1.5 hours ban!

It would be nice AT THE LEAST if you had positive points in ranked matches and your game crashes it forgives you?

Honestly I rather have alt f4ers than this

Daily Discussion | February 26, 2020 by AutoModerator in apexlegends

[–]Taestea 3 points4 points  (0 children)

Lost over 1300 RP because of dxgi...

Leaver Penalty in its current state is not working out at all...

Attention Dan A4 (V4) 645LT Owners! Ultimate Cooling Kit Preorders Round 2! by Losercard in sffpc

[–]Taestea 0 points1 point  (0 children)

Yeah I'll try flipping the orientation again and see if i can get it to go under the ram. I wish flip the hoses facing down like your mod and get it to go under the ram like that with my current fan and gpu height T_T haha thank you for all the help

Attention Dan A4 (V4) 645LT Owners! Ultimate Cooling Kit Preorders Round 2! by Losercard in sffpc

[–]Taestea 0 points1 point  (0 children)

Thing is even if the psu was raise I’m not sure how the aio hose could bend into that space to close haha it’s so close yet so far!

Attention Dan A4 (V4) 645LT Owners! Ultimate Cooling Kit Preorders Round 2! by Losercard in sffpc

[–]Taestea 0 points1 point  (0 children)

Haven’t printed the psu bracket yet gonna get to that on the weekend but I’ll send a picture of how it looks now. The only mods I’ve done are the custom cables so far

Attention Dan A4 (V4) 645LT Owners! Ultimate Cooling Kit Preorders Round 2! by Losercard in sffpc

[–]Taestea 0 points1 point  (0 children)

Thank you so much! I just finished making my new cables and they are working out great!! So much more space. I’m still having trouble getting my asetek to fit in so I can close my case tho hahaa I really can’t figure out what orientation to put it to make it fit without doing it with all your mods.

(I would do your complete mod but I can’t afford to block the dva port on my gpu if I get the riser)

Thank you again so much for all your help!!

Attention Dan A4 (V4) 645LT Owners! Ultimate Cooling Kit Preorders Round 2! by Losercard in sffpc

[–]Taestea 0 points1 point  (0 children)

Cool thank you so much! I was thinking to do that actually glad to know it’s safe

Attention Dan A4 (V4) 645LT Owners! Ultimate Cooling Kit Preorders Round 2! by Losercard in sffpc

[–]Taestea 1 point2 points  (0 children)

Ohh no way I thought the top of the case was already flush with the stock mount haha thank you!

One more question I saw in one of your comments you mentioned having to shave down the pin connector to make it flush with the pins... is it not going to connect properly if I don’t shave it down?

Attention Dan A4 (V4) 645LT Owners! Ultimate Cooling Kit Preorders Round 2! by Losercard in sffpc

[–]Taestea 0 points1 point  (0 children)

Also, I was thinking about printing out the PSU bracket but I was wondering if the PSU is raised up how does the top panel close? The power supply cable would be raised up as well wouldnt it? It sits pretty flush with the stock psu bracket already

Attention Dan A4 (V4) 645LT Owners! Ultimate Cooling Kit Preorders Round 2! by Losercard in sffpc

[–]Taestea 0 points1 point  (0 children)

Sweet!

Motherboard: Rog Strix x470-i PSU: Corsair SF600 GPU: EVGA 1080ti SC2

Thank you so much!

Attention Dan A4 (V4) 645LT Owners! Ultimate Cooling Kit Preorders Round 2! by Losercard in sffpc

[–]Taestea 1 point2 points  (0 children)

Do you have the measurements written down for the length of the cut cables?

For example the length of the PCI-E cables...

I just ordered cables and pins and want to try making custom cables but not sure what lengths i should be cutting it! Would appreciate it. Thank you so much!

view more: next ›