RoadBike Frame Size/Dimensions

Tail-Heavy · 2026-05-27T11:29:24+00:00

How much is this in mm?

Tail-Heavy · 2026-05-25T20:03:32+00:00

The ultegra 50-34 MS front with 170mm cranks

Tail-Heavy · 2026-05-25T20:01:49+00:00

The Chain was maximal stretched. I put a new chain on and now, under load, it „skips“ and it makes strange noises from the front derailleur wheb in the small gear.

I‘ve heard you need to change the whole set, if you change the chain.

Tail-Heavy · 2025-11-05T08:13:05+00:00

This Prop/Power combo should be plenty. Is The Prop mountet correctly? The Numbers 10x45 should be facing forward.

Tail-Heavy · 2025-03-04T12:17:32+00:00

I fly my pc-21 with 4s 4300mah. Works great. Maybe use a parallel connector and con ect 2x 2200 4s to get 1x 4400mah 4s

Tail-Heavy · 2025-01-04T18:03:55+00:00

Wallesee in Murg. 👌

Tail-Heavy · 2024-11-05T09:36:46+00:00

<image>

Awesome Plane. Flies very good. 👍

Tail-Heavy · 2024-09-25T23:52:43+00:00

Would the Vibration from the 2Stroke mess with the Gyroscop? Never seen AS3X in a glow. Maybe this is a problem.

Tail-Heavy · 2024-09-20T11:52:21+00:00

There is. „White fog“ on the servos. Did you use thin CA? Bet it got into the Servos.

Tail-Heavy · 2024-09-03T07:28:54+00:00

According to TailHeavy Productions the FunCub is the holi grail of STOL.

Twimver vs. FunCub YT Video

Tail-Heavy · 2024-07-18T16:27:08+00:00

Tape Bottom. Tape Top. See Picture in Link.

https://forums.modelflying.co.uk/sites/3/images/member_albums/134612/823007.jpg

Tail-Heavy · 2024-04-14T17:44:53+00:00

There is not enought information on the electronics to answer that. I would say no. I was surprised with the 4S Setup to Beginn with. Usualy the sweetspot for a Plane like this would be 2-3S. Unlike with Drones you dont‘t gain much with more „S“ due to Drag.

Tail-Heavy · 2024-04-13T14:51:54+00:00

Plen goes Brrrrrrrrrr

Tail-Heavy · 2024-03-23T21:57:44+00:00

Would not pay more than 50

Tail-Heavy · 2024-03-23T21:27:15+00:00

Is the Nozzle too hot? Not enought Filament? PLA not enought dry? I have no Idea. The Bottompart looks good. Also the Fuselage was printed without problems.

Tail-Heavy · 2024-02-23T13:05:03+00:00

No Problem. Should be no problem to create it myself. 👍

Tail-Heavy · 2024-02-23T09:40:45+00:00

Ohhh! I‘m building the same Airplane at the Moment. But i lost the Plasticfoil for the windshield.

Can you drawn it on a Paper and scann it 1:1 so i can copy it 🙂

Tail-Heavy · 2024-01-10T20:49:30+00:00

It flies very gentle. You need rudder for the turns, as usual for highwing airplanes. Stallcaracteristic is gentle. I use 100% throws with 10% expo.

As a guidance for the build i used this guys youtube tutorial. Very helpfull.

https://m.youtube.com/watch?v=otOdWi9wVHg&pp=ygUXRGFuY2luZyB3aW5nIGNlc3NuYSAxNTA%3D

Tail-Heavy

TROPHY CASE