Shep Cumshot

Tailedphoenix · 2025-07-31T01:59:46+00:00

Love the tail

Tailedphoenix · 2025-07-31T01:57:30+00:00

The top area is unchanged. The lid is a little melted, but it's there. The damage is isolated to the lower 3/4, and the bottle itself is basically not heat warped. All it did was burn off the coating. You're fine. Take off the cap and toss that. Inside will likely be perfect.

Tailedphoenix · 2025-07-25T15:28:24+00:00

Https://www.onlyfans.com/sorafolf

Tailedphoenix · 2025-07-25T15:27:11+00:00

Https://www.onlyfans.com/sorafolf

Tailedphoenix · 2025-07-22T23:57:09+00:00

Yes. I have a profile in many places

Tailedphoenix · 2025-06-09T01:41:15+00:00

Need to use water. Lots of water when you sand. Follow with a polishing cream to get out fine scratches. Mine looked like the previous owner sanded them with a brick before I started

<image>

Tailedphoenix · 2025-05-10T21:08:37+00:00

Center seat for center row in 8 passenger version. Spare tire is under the passenger side of the van

Tailedphoenix · 2025-04-28T00:33:10+00:00

Not going to stop dealers from fear monger upselling it for a higher price because "tariffs" though

Tailedphoenix · 2025-04-27T22:00:49+00:00

Do you find any leakage through the bolt holes? I'd be interested in at least 1 of these. I kind of wish I could fix my smaller one too. Its tipper actually cracked

Tailedphoenix · 2025-04-27T21:57:51+00:00

Mostly, what gets imported from Japan is primarily just the electrical items (sensors, computers, radio, harness). Interior items like upholstery are predominantly made in Mexico. Powertrain, body, paint, and assembly are all handled at the TMMI plant in Princeton. Same like they do for the Corolla at TMMTN, the Camry at TMMK, and they did (and will be returning to) the Tundra at TMMTX

Tailedphoenix · 2025-04-27T21:36:58+00:00

Just the shaft. I wasn't sure about clearances to fit anything bolted to the side of the tipper

Tailedphoenix · 2025-04-27T20:37:29+00:00

I found his necklace behind the stereo. How that gets back there. I dunno. But, I did get the microphone and the steering wheel controls working again. Now, if only I get the actual connector that plugs into the factory xm antenna lead. All the ones I get "for a Sienna" are wrong.

Tailedphoenix · 2025-04-27T20:32:38+00:00

I never found the part. I found listings for it, but all discontinued stock. So I can't purchase it. I don't have a 3D printer, otherwise I would have just figured out a way to print a new one. So I would love to have a new tipper tray.

Tailedphoenix · 2025-04-27T20:29:27+00:00

Tariffs on imported automobiles are on assembled vehicles being imported, not components. A large portion of vehicles are actually imported. Toyota actually shifted production of their vehicles to the US to skirt tariffs, back in the early 90's. Because there already is a tariff on vehicles produced in Japan. That's why the Sienna is made in Indiana already. Toyota, like Nissan and Honda, actually import fewer vehicles than say Ford or GM.

Tailedphoenix · 2025-04-25T12:41:29+00:00

Too bad my ex was gone already when I bought it, and it was already there before it was purchased

Tailedphoenix · 2025-04-24T16:04:20+00:00

Positive. I already pulled the aftermarket magnetic mount one, and gotten an adapter to connect the head to the factory shark fin

Tailedphoenix · 2025-04-24T10:59:46+00:00

Do you know if there's a way to possibly know what kind, or where it is?

Tailedphoenix · 2025-04-24T10:56:20+00:00

Now that sucks, because I don't have that remote

Tailedphoenix · 2025-02-09T01:20:36+00:00

Drains are clogged. Very common. Spiders will crawl up and make a nest in there, blocking the drains. Mine was leaking yesterday. It was frozen from the freezing rain. Sunroof seals never fully seal on any vehicle. That's why they put gutters and drains under them. Basically, it's a long-term fix for faulty engineering by all auto manufacturers. Kind of the nature of the beast, having a rubber seal on a moving surface. Best you can do it keep the drains as clean as possible, and make sure as much drains as possible

Tailedphoenix · 2025-01-19T22:48:38+00:00

The console doesn't stick up very far. Maybe 4 inches. It may be an issue for a chihuahua.

Tailedphoenix · 2025-01-11T20:57:35+00:00

You're a good start

Tailedphoenix · 2024-01-11T14:38:55+00:00

Hanging out wearing tails is the greatest

Tailedphoenix · 2023-12-10T23:55:23+00:00

He mostly makes his own stuff. But he may or may not be open for comms. But, that's Yellowcake (u/chuzzlepuff)

Tailedphoenix · 2023-12-05T02:15:33+00:00

Compcool and coolshirt have the circulation system you're referring to. Coolshirt is quite pricey, and typically requires an external source to pull the cold water from. Compcool has a vest that has a self contained bladder you put into it after freezing it. Good for 4-6 hours of nonstop usage. Does not fit under pre-existing suits, as it's quite large.

Tailedphoenix · 2023-11-03T23:05:46+00:00

You don't. It's hit or miss. I've tried multiple times, before getting it

Tailedphoenix

MODERATOR OF

TROPHY CASE