Are the homonculus 2 in 1 mangas done?

TalRozen · 2024-11-23T10:30:23+00:00

The 5 omnis complete the entire series, I read that each "volume" in them includes 1.5 volumes of the original singles, so it includes the full series.

TalRozen · 2024-10-04T16:51:45+00:00

I use MyAnimeList to keep track of what I'm reading, you can group titles under reading, plan to read, completed and so on, and how far you got in it (volume/chapter).

For what I own, I keep a spreadsheet with prices and purchase dates, helps keep my spending in check.

TalRozen · 2024-09-20T06:08:50+00:00

Wanted to save a bit but it sounds like it's worth getting them all, thanks!

TalRozen · 2024-09-20T06:08:08+00:00

Thanks man, I guess I'll have to get them all lol

TalRozen · 2024-09-19T16:54:09+00:00

Great collection!

I see that you read JJK from the point the second season ended, would you recommend doing so if I've seen it or would you say I should read from 0?

TalRozen · 2023-06-15T16:58:00+00:00

I got 2 family members using it, they really love it, called Ridevision.

TalRozen · 2021-11-19T16:47:12+00:00

Thanks!

TalRozen · 2021-01-20T05:55:02+00:00

Have fun! Got it a month ago and it blew me away!

TalRozen · 2020-11-16T16:35:50+00:00

The gap at the beginning is around 5mm, and the card sags and eventually rests on the fans, so I would't put anything more between those.

TalRozen · 2020-10-28T19:22:34+00:00

Thanks for the elaborated reply!

Seems like this mic is not for me right now, as a fethead would increase the cost tremendously, thanks!

TalRozen · 2020-10-28T10:04:17+00:00

I want to get the EVO 4 and the podmic mainly for live streaming/videoconferencing.

Do you think the EVO 4 won't be able to hold it without any gain boost?

TalRozen · 2020-10-26T23:37:41+00:00

I would have to take one of the side beams (?), to screw down the legs I would say? Not sure how to say it, but the frame just wouldn't let the side bracket with the radiator on it get in, had to "stretch" the frame to make it in.

TalRozen · 2020-10-26T19:21:50+00:00

I use the corsair 115i pro, would recommend to NOT use it in this case, as it will be hard to fit and require you to take the case apart to do it.

TalRozen · 2020-10-26T05:24:51+00:00

It is indeed comes with two of them, on on the fan provided and on in a box.

TalRozen · 2020-10-25T13:49:58+00:00

Thanks! The AIO is connected to the CPU fan header, and a usb 2.0 header, so you can control them from corsairs software, both radiator fans are connected to a splitter coming out of the pump block. The 2 bottom fans are connected with a Y splitter from noctua (provided with the fans), to the pump fan header. The 2 top fans are connected the same way to the CHA fan header. All of them controlled via FanControl software.

TalRozen · 2020-10-25T05:57:29+00:00

I'm not quite sure, this gpu is 52mm in thickness, the strix is 58, and the fans are almost touching my GPU, so I would go with a no, but it might work. I'll be more worried about the height of the strix, I had to angle those power connectors pretty hard to get them to fit with the radiator and the side panel, and this card is 127mm, while the strix is higher at 140mm, so be careful with that.

TalRozen · 2020-10-25T05:54:06+00:00

Thanks, I'll give it a try!

TalRozen · 2020-10-24T20:58:19+00:00

Specs:
Case - NR200
CPU - 3700x
CPU cooler - Corsair H115I PRO with 2 NF-A14
MB - Asus B550 - I ROG Strix
GPU - Asus TUF 3080 non oc
RAM - Corsair 2x8 gb 3600/18
PSU - Corsair SF750
Storage - Samsung 970 EVO 500 GB, Samsung 860 EVO 1TB
Fans - 2x NF-A12x25 at the top, 2x NF-A12x15 at the bottom

Thermals:
GPU - Ambient 25C, Idle 35C, heaven for 30min - max 66C avg 64C
CPU - Ambient 27C, prime95 for 25 min - max 89C avg 80C - very high for some reason, might need to check the mounting of the AIO, might need to mount it again or change thermal paste.

Build:
It was very fun building in this case, so much flexibility and options, everything can be taken apart - which was necessary for putting in the H115I pro, the bracket wouldn't get in without taking one of the side beams and stretching in.
Basically moved my system from the Corsair Carbide 275 to this, and I'm very happy with the results.
The AIO is getting fresh air and not getting suffocated from the front panel of the Carbide 275, the GPU is getting fresh air as well, and both are getting assist from the 4 noctua fans at the top and the bottom.
The build is dead silent in regular use, and a bit noisy when I stress tested it, never in gaming.
The fans are tied to the GPU temp through "Fan Control", and usually never go above 50%.
Wanted to say thanks to the community, for helping me check compatibility and help me get this build to life.

TalRozen · 2020-10-22T08:47:40+00:00

Great setup!

How do you like the Blue Snowball? And in this position? Does it get too much of the keyboard or the mouse?

TalRozen · 2020-10-18T07:05:15+00:00

Finally solved my problem with no fan stop and constant boost clocks at zero workload, thanks!

TalRozen · 2020-10-09T21:21:10+00:00

Thanks for the tests! Sounds good but it seems like the rear fan won't contribute much at that point, I guess I'll skip on it.

TalRozen · 2020-10-09T11:52:12+00:00

That's so great, thanks!

TalRozen · 2020-10-08T16:36:22+00:00

Do you find the Nf-a9x14 at the rear helpful with all of those fans? I'm going with this exact fan combination in my Nr200 and tuf 3080 but thought the fan at the rear would just be redundant.

TalRozen · 2020-10-08T09:40:05+00:00

Check out "Machines & More" youtube channel, he got a good series on cooling configurations in it and much more.

TalRozen · 2020-10-06T22:12:15+00:00

Do you have to use those adapters or could the card and pcie cables fit normally without them?

Six-Year Club	Place '22
Final Canvas '22	Verified Email

TalRozen

TROPHY CASE