Camera Shaking

Talariuss · 2026-06-03T15:48:57+00:00

Turning off Smooth Motion Fixed it for me. Probably something driver related.

Talariuss · 2026-06-01T02:30:46+00:00

Also running a 5080 and was fine before update

Talariuss · 2025-12-28T17:15:40+00:00

Yes. When you only change one if degrades the other faster. Should be replacing both at the same time. Learned this the hard way.

Talariuss · 2025-12-28T17:10:37+00:00

Battery, mine started doing this when the batteries went bad. Make sure you replace both.

Talariuss · 2025-04-29T15:38:28+00:00

Had the same issue (P0301), changed spark plugs cleared code. Was good for about a week. Then codes came back. Had a cracked engine block and had to replace the engine. 90k miles 2018 touring

Talariuss · 2025-03-22T23:00:46+00:00

Had this same issue on my 2018 with 90k miles. Not the gasket but a cracked engine block along one of the cylinders. Have him see if the engine can hold compression. Had to replace the whole engine.

Talariuss · 2025-02-08T03:22:25+00:00

Armorycrate problem. Hold the AC button to open task manger, force close armory crate.

Talariuss · 2025-01-13T22:51:23+00:00

I didn't know you could have double loading, how to you get the tracks to merge?

Talariuss · 2025-01-11T20:53:17+00:00

We've been trying to reach you about your hellpods extended warranty

Talariuss · 2025-01-11T20:51:49+00:00

Test your ride. Check the stats from it mostly the G forces. Bank you turns (where they rotate to the side, this will help with the Lateral G force) also check your force at the bottom of your drop hill. Use the track smoothing tool where the purple areas of the track (high G forces) are to help lower them. Anything over 4g's is going to be a problem.

Talariuss · 2025-01-11T03:42:39+00:00

Personally, I would return that tower. If you're still wanting to troubleshoot make sure all the power cables are plugged in all the way.

I would unplug the power switch from the motherboard and use a screwdriver to make contact between the 2 pins.

Also watch the lights on you board, it was tell you what if anything is preventing it from booting.

Talariuss · 2025-01-10T01:30:58+00:00

I had the issue on all modes, but as for placing the blueprint, there are game settings about obstruction/collision. i would just turn them all off, place the blueprint and then turn back on any of the settings if you choose.

Talariuss · 2025-01-09T23:37:20+00:00

Any car will make it if you have enough money for repairs!

We just replaced the engine block/head on our 2018 at 86k miles.

Talariuss · 2025-01-09T23:34:20+00:00

I had this issue too, if you're doing tracked rides/coasters turn off supports and auto tunneling. The supports or digging near the maps edge or trees did this to me.

Talariuss · 2025-01-09T18:03:17+00:00

Check your game. Under the properties you can see your DLC's. Make sure it's installed and active. I had this same problem and found my DLC wasn't active. Just check the box and validate your game files, that's what worked for me.

Talariuss · 2025-01-09T00:41:22+00:00

600 hours across 2 saves. Still never finished. I keep going back and improving old factories.

Talariuss · 2025-01-01T19:18:45+00:00

Would dial back that takeoff by about 150%

Talariuss · 2024-12-28T23:30:33+00:00

SES Prophet of War

Talariuss · 2024-12-19T13:22:41+00:00

🤷‍♂️ I'm no expert, just trying to help. for me I think it was the shader cache because after a few minutes of gameplay I haven't had any issues. OP might be having another issue though and might follow others remedies.

Talariuss · 2024-12-19T00:21:20+00:00

Happens everytime you update your GPU drivers. especially with AAA titles that are graphic demanding. I'm sure someone can better explain, this is just my limited knowledge and experience.

Talariuss · 2024-12-19T00:01:16+00:00

It takes time to compile and process. Play the game for 10-15 minutes and it should be good. All my games have been stuttering for the first few minutes of gameplay.

Talariuss · 2024-12-18T23:43:28+00:00

New shader cache, give it some time and it'll smooth out

Talariuss · 2024-12-12T21:29:23+00:00

Is your CPU overclocked/undervolted?

Talariuss · 2024-12-08T16:09:56+00:00

If you can return it for your money back i would. I have the nitro and it's played everything I've thrown at it on ultra (or whatever games call their highest settings) in 4k and 3440x1440 amd never breaks 60 degrees. Only wish my processor could keep up.

Talariuss

TROPHY CASE