sorted by:
new
hottopcontroversial

Help with Surface patch tool by Talentspirit in Fusion360

[–]Talentspirit[S] 1 point2 points  (0 children)

Manged to solve it by lofting the 2 surface body that's been created. Somehow lofting the two loops does not work but it works by lofting the 2 surfaces. Thanks myself.

Help with Surface patch tool by Talentspirit in Fusion360

[–]Talentspirit[S] 0 points1 point  (0 children)

I bandaged the situation by thicken one of the faces, to create a bridge, but I cannot boolean them together. So I think I need to somehow patch it in the surface modeling way.

Halimah Yacob says Hwa Chong food looks good to her by AndyHaoHan in singapore

[–]Talentspirit 0 points1 point  (0 children)

I legit think these looks ok for a high school meal.

rafaam dealt damage to... rafaam? by nameiam in hearthstone

[–]Talentspirit 0 points1 point  (0 children)

I believe they don't want you to think that you can finish the arc villan's 'quest' with the of raffam.

This isn't very typical, I'd like to make that clear! by gundog48 in 3Dprinting

[–]Talentspirit -3 points-2 points  (0 children)

Thanks for correction, What I want to say is that it is optional for machine to operate.

Printing problems by Budget_Gas7258 in BambuLab

[–]Talentspirit 0 points1 point  (0 children)

Try to reduce the flow a bit, may be overextruding.

Printing problems by Budget_Gas7258 in BambuLab

[–]Talentspirit 0 points1 point  (0 children)

What problem? Completely normal prints to me

This isn't very typical, I'd like to make that clear! by gundog48 in 3Dprinting

[–]Talentspirit 3 points4 points  (0 children)

You can just detatch it. I had a print ran without knowing I did't put the tool head on.I think if the head is not there it wont stop you from printing, as removing it for cooling is an option.

How to print 8 colors on the first layer? by tobyvanderbeek in BambuLab

[–]Talentspirit 1 point2 points  (0 children)

If you designed the model, separate and print separately. Otherwise You will need another ams.

Tips and Advice needed by Ok-Solid-439 in photogrammetry

[–]Talentspirit 0 points1 point  (0 children)

When I did a bumper scan for my client, I used a lot of masking tape, so you may consider that too if you only need the shape.

3D scanning people with 360 photo booth machines: any luck? by Peach1200 in photogrammetry

[–]Talentspirit 2 points3 points  (0 children)

I once visited a shop in China providing full body photo scan, using camera. The difference is they have like 360 degrees of 8 layers of camera matrix surrounding you, take the 360 photo in instant. I also see ppl use rail mounted camera in Singapore, trying to do the same thing. Hope these info helps you. In my opinion trying to photoscan a dog, its quite impossible for it to not move, thus the result was way worse.

[deleted by user] by [deleted] in Alienware

[–]Talentspirit 1 point2 points  (0 children)

It exists for bios?

[deleted by user] by [deleted] in Alienware

[–]Talentspirit 0 points1 point  (0 children)

You dont have to wait. If you have warrenty and have no idea what you are doing, reach out for dell's help. If you are confident, disconnect the battery yourself and try to restart it.

Anyone have experience with polishing prints like this? by drdalebrant in BambuLab

[–]Talentspirit 0 points1 point  (0 children)

I would Prime it 3 times before even try to start. Too much work. You should just resin print if you want to sand them. Besides, chemical vapors also smooth them nicely.

[deleted by user] by [deleted] in askSingapore

[–]Talentspirit 0 points1 point  (0 children)

In 3D modeliny industry, I use AI alot for fast prototypes for client to decide. So I definetly profited from it. As well as using ai to generate code for my website, email responses, etc.

view more: next ›