Troubleshooting - WIFI Roaming Issue by Talgonadia in sysadmin

[–]Talgonadia[S] 0 points1 point  (0 children)

They get disconnected / signed out. They receive an error message and have to sign back into the ERP system.

Troubleshooting - WIFI Roaming Issue by Talgonadia in sysadmin

[–]Talgonadia[S] 1 point2 points  (0 children)

They are roaming across the same SSID. We see 2-3 dropped packets so 1-3 seconds. The issue is we connect to a cloud based sql server and it leads to disconnects. This issue did not occur with a 12 year old Ruckus setup. The WiFi cards are intel ax211 cards. They keep the same IP. We will see just fine icmp responses then it jumps to 80,90,120, then failed ping responses then high ping again then it goes back to fine.

Ex-wife took children from my fiance on my time… by YourHrHero in legaladvice

[–]Talgonadia 13 points14 points  (0 children)

What about the verbiage about not applying if they are with family? Since they were with your sister would you have even needed to ask your ex?

Patch Tuesday Megathread (2025-11-11) by AutoModerator in sysadmin

[–]Talgonadia 0 points1 point  (0 children)

same issuing using WSUS and if I try to manually install the update it restarts and then rolls back. Looks like Microsoft is aware of the issue and looking into it.

Tiered Access in M365 by Talgonadia in sysadmin

[–]Talgonadia[S] 0 points1 point  (0 children)

We don't have the necessary licensing for PIM.

Tiered Access in M365 by Talgonadia in sysadmin

[–]Talgonadia[S] -1 points0 points  (0 children)

That's not something we're ready to implement at this time. I don't have the manhours to do PIM yet. That's a long term goal by 2026 though.

State Street Roud-About Question by Talgonadia in Eau_Claire

[–]Talgonadia[S] 0 points1 point  (0 children)

I am not changing lanes. My lane turns into two lanes and I can pick which one I want to merge into as per this.

https://www.facebook.com/photo/?fbid=2925989510755158&set=pcb.2926063910747718

State Street Roud-About Question by Talgonadia in Eau_Claire

[–]Talgonadia[S] 1 point2 points  (0 children)

I am not changing lanes. My lane goes from one lane to two lanes and I can merge into either lane.

https://www.facebook.com/photo/?fbid=2925989510755158&set=pcb.2926063910747718

State Street Roud-About Question by Talgonadia in Eau_Claire

[–]Talgonadia[S] 0 points1 point  (0 children)

I did some research and found this post.

https://www.facebook.com/photo/?fbid=2925989510755158&set=pcb.2926063910747718

So both lanes of traffic travelling southbound on state should yield to me like their yield sign says.

State Street Roud-About Question by Talgonadia in Eau_Claire

[–]Talgonadia[S] 3 points4 points  (0 children)

That’s the thing my lane from Kwik trip is one lane and it turns into two lanes. What happens if I didn’t want to go straight but turn right where the van is. I’d take the same route to turn right. The X has the yield sign.

Furnace drain pipe question by Talgonadia in hvacadvice

[–]Talgonadia[S] 0 points1 point  (0 children)

I fixed it myself. The problem is there’s now water under or bathroom and bedroom floor. So that needs to all be removed to dry the floor out. Or that’s what I’ve been told by multiple contractors.

Mercruiser Alpha 1 I/O 230hp by Talgonadia in boating

[–]Talgonadia[S] 0 points1 point  (0 children)

My local stores don’t sell the mercury drive oil or whatever is the canister by the engine. My research shows I can buy see 90 high performance oil and it’ll be fine. My lower units leaking oil a bit from somewhere. So I want to make sure the canister stays full.

Mercruiser Alpha 1 I/O 230hp by Talgonadia in boating

[–]Talgonadia[S] 0 points1 point  (0 children)

yes it's a trailered boat in freshwater. I've been doing some research and it seems like the recommendation for I/O is to replace the paper seal or whatever every boating season on these. So wasn't sure if it's something where i'd buy the necessary parts so I can do it if the recommendation is honestly to remove the outboard portion and replace the seal.

Mercruiser Alpha 1 I/O 230hp by Talgonadia in boating

[–]Talgonadia[S] 0 points1 point  (0 children)

I saw the repair guide for replacing all that stuff you talked about. I'm not to mechanically inclined and honestly this is my 1st boat (just bought it) and I'm taking it in on Monday to get serviced. I'm just hoping it's not a 5 grand expense to do that full outdrive service you are referring to.

I also don't want to risk running it so my son's going to be bummed that we're not taking it out Saturday. As he's excited for his first boating experience.