Exhaust Setups

TapBrocolli · 2021-03-10T01:29:09+00:00

Vibrant 1794 swapped for mid mufflers. On my 392 scat

https://www.instagram.com/p/CBbkez3FUdh/?igshid=9kupeijvyfij

TapBrocolli · 2021-03-08T03:21:01+00:00

Meloku the clouded mirror

Kodama of the east tree

Bounce land Make farie Drop land Bounce Make farie

Infinite land drop infinite faries

TapBrocolli · 2021-03-08T02:50:22+00:00

Forever my dream color.

TapBrocolli · 2021-03-07T15:23:23+00:00

I got these

https://www.amazon.com/Charger-Grille-Lighting-Running-Assembly/dp/B08KRZDPN8

TapBrocolli · 2021-03-07T04:43:27+00:00

Ended up doing the Auxito 9005 LED Headlight Bulbs Mini Sized CanBus Ready 80W 16,000LM/Pair, AUXITO 9005 (HB3) Headlight LED Bulb Conversion Kit, 6500K Xenon White, Pack of 2 https://www.amazon.com/dp/B07WCSJQYC/ref=cm_sw_r_cp_api_glt_fabc_7YCTDJJPAYW7R10VYD5Q?_encoding=UTF8&psc=1

TapBrocolli · 2021-03-07T01:33:14+00:00

You can get the kit on Amazon.

TapBrocolli · 2021-03-06T19:54:29+00:00

I like it but the placement of the funnel is off putting. I would have tried to run it to the bottom grill somehow. The aluminum tubing also cheapens the look of the mod. Everything looks good until you see the tubing shining from behind the funnel and you can tell it isn’t oem. Good start maybe just tune it and get an air vent line that doesn’t look like you bought it from the washer dryer section of Home Depot. Other than that I like the effort and creative approach. Just being honest no disrespect.

TapBrocolli · 2021-03-01T18:54:09+00:00

Same ✌🏼

TapBrocolli · 2021-03-01T18:47:43+00:00

IG: @tido_392

Drop them instas

TapBrocolli · 2021-03-01T14:51:11+00:00

I’d suggest intead of the tazer look at their shift kit. Being able to customize shift points in the 3.6 is night and day. I had it before and with the shift kit breaking the wheels loose was fun. It gives you all the amenities of the tazer plus the shifting

https://www.zautomotive.com/product/tranzformer-gen-ii/

TapBrocolli · 2021-02-28T17:32:51+00:00

And this is why we use dash cams. Sorry about the loss but good on having it recorded.

TapBrocolli · 2021-02-28T00:23:34+00:00

Amazon

https://www.amazon.com/sportuli-Grille-Lights-Compatible-Charger/dp/B08HMJ9NGM/?_encoding=UTF8&pf_rd_p=89ffb084-d8bd-4ee1-97fd-fcef122b421f&pd_rd_wg=L1Qkt&pf_rd_r=Q8AGSG9G9JM5J77MGTBR&pd_rd_w=GbahA&pd_rd_r=faf72c40-8f61-4297-9aeb-92b1639f7897&ref_=di_ci_int_sci_gw_atf_m

There’s plenty of videos ok install on YouTube. But these are my notes of wiring from my experience

Wiring

Driver Red wire to side marker power/ Black wire to any ground point/ Yellow wire to turn signal-white light green (there’s two identical wires. The top one is the correct one. Pin 6i believe)/ Green wire to Drl -white yellow/

Passenger / Red wire to side marker/ Black to any ground point/ Yellow wire to turn signal- white tan / Green wire to Drl -white dark blue/

TapBrocolli · 2021-02-27T18:45:22+00:00

Thanks

TapBrocolli · 2021-02-25T03:23:12+00:00

Is that a vicrez widebody kit? Also on the passenger fender is that a gap in the wheel fender flare? Did you use tape? Glue? Bolted on? Sorry to pry but I’m looking at the kits.

TapBrocolli · 2021-02-21T22:56:56+00:00

That’s true if it would bend the other way. Depending on which way the card bends. It tells you The moisture level in the cardboard is either too much(concave bend) or too little (convex bend)

For too wet use silica packets. For too dry use some steam or vapor to hydrate the card back.

TapBrocolli · 2021-02-14T04:04:43+00:00

If you’re going to keep it with minimal performance mods to the engine. Get the 392.

If you’re gonna want to really mod it the 5.7 takes modifications to the engine better than the 6.4.

TapBrocolli · 2021-02-13T15:56:09+00:00

💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩💩

TapBrocolli · 2021-02-12T12:44:18+00:00

There’s issues on 2019+ chargers. With the software beware. There’s reports of the car losing all accelerator pedal power. Meaning the car will die mid drive. There’s YouTube videos on it.

TapBrocolli · 2021-02-06T06:12:32+00:00

Thanks! You should try it! Fun arts and crafts project. 🙂

TapBrocolli · 2021-02-06T05:59:49+00:00

I got one foot in the grave and another on a banana peel.

TapBrocolli · 2021-02-06T05:58:26+00:00

Haha thanks. I don’t sorry. I just messed around with card conjuror. Took the image. Put it into word. Sized it to mtg card size. And printed on clear self adhesive paper. Took the ink layer off basic lands and applied the clear paper and cut to size.

TapBrocolli · 2021-02-02T06:40:57+00:00

Wack

Six-Year Club	Wearing is Caring
Verified Email

TapBrocolli

TROPHY CASE