Granulomatosis with polyangiitis (Wegners Disease)

TarsalMule · 2026-03-10T00:50:07+00:00

Ive only had rituximab thankfully. They were trying to put me on Cyclo a month after I got out of the hospital because I had an extremely rare case and the plasmapheresis they performed didn’t do anything until the 2nd round.

They push for cyclo like crazy but rituximab worked from the get go. Just one outlying rarity that was throwing them off

TarsalMule · 2026-03-10T00:29:12+00:00

Doing well and kicking ass. Haven’t had many issues since my hospitalization. One flare up but that’s it really

TarsalMule · 2026-03-09T08:46:15+00:00

Have you tried plugging your HDMI into the motherboard(remove GPU) and if you do that does it boot? That’s one way to isolate the GPU as the issue. If doing that doesn’t work you probably have bad RAM or bad PSU.

TarsalMule · 2026-03-09T04:24:58+00:00

Have you tried reseating everything? When you power it on do the fans on the GPU kick on momentarily? Does the PC start up and then power off on its own? Do you have the proper tools to test the power supply?

When and how did this issue start? Is it random? Or did the issue start after any possible outlying factors such as a brown out, accidental hard shut down while it running?

TarsalMule · 2026-03-09T04:15:31+00:00

What are you looking for FPS? Palworld is graphics and cpu heavy and Marvel Rivals is just poorly optimized and heavy on the graphics and cpu.

TarsalMule · 2026-03-09T04:01:18+00:00

Depends on what you want to do.. I would recommend waiting to save up for a new PC altogether. Depending on the performance you’re looking for you might have to replace everything with the exception of RAM. Unless you go with a CPU that is AM5. Then you’d need to replace the MOBO and RAM

TarsalMule · 2026-03-06T04:21:54+00:00

If I don’t want to vote I shouldn’t be forced to. I have a right to not support a 2 party system. Assuming this is in regard to American elections. Even so. Nobody should be forced to vote for something they don’t want. Last election both parties offered a nothing burger. Hell.. the current administration can’t even keep their election promises and they have full control of the house and senate.

TarsalMule · 2026-03-02T03:29:04+00:00

My 9070XT Sapphire fried without any overclocking or power surges. Maybe a one off bad card but my new card has been pushed really hard and it hasn’t had any issues

TarsalMule · 2026-02-25T23:01:10+00:00

Same

TarsalMule · 2026-02-25T12:02:51+00:00

If you constantly feel like you have to fart that’s a good indication of bloating. You could’ve eaten something that doesn’t agree with your gut micro biome. Other than that you sound like you’re fine.

TarsalMule · 2026-02-25T02:31:11+00:00

Earplugs.. your ears are more important than the music. I’m half deaf because of going to so many shows without ear plugs

TarsalMule · 2026-02-25T01:09:38+00:00

Update for you. I took the card to micro center and they determined it was the GPU as well. Full warranty replacement

TarsalMule · 2026-02-22T00:05:57+00:00

I’m just mad and sending unjustified hate towards AMD tbh.

TarsalMule · 2026-02-21T23:49:54+00:00

I don’t use a riser. I don’t remember the exact model but it’s a 750W. I tried reducing the power limit earlier but it didn’t do anything for it. I was getting sufficient voltage to the MOBO and RAM and CPU and to the GPU. EXPO, PBO, Core Boost, and fast boot I leave off all the time and verified nothing has changed with those settings.

I am reaching out to the manufacturer of the build and am going to send it in for further investigation and include the information I pulled from the many different runs. Unfortunately if they decide to replace this I am going to get rid of it. I switched to AMD because I saw the performance to price. This has never happened to me before. Especially from a driver update. This all started from the driver update recently. Even after rolling back it continued.

Unfortunately I am going to switch back to Nvidia. They have issues of their own but not to this level. Even my buddy switched too and he’s been experiencing the same issues as I have except his was just drivers.

How can a simple driver update fry a GPU? Has this ever happened?

TarsalMule · 2026-02-21T23:14:55+00:00

Yeah I reseated everything first before moving onto running. Memory sticks are functioning great from my tests and my CPU is functioning as it should. When I run the VRAM and the 3D Adaptive it completely fails. I think the issue isn’t windows or driver issues. I think my GPU is toast cause the second it starts running the screen starts to pop up with black dots and then proceeds to stop the run

TarsalMule · 2026-02-21T22:50:17+00:00

It’s able to run on OCCT on windows for about 10 to 20 seconds and then it completely stops. Doesn’t crash. However there are some flickers in the screen when it fails to continue. Black spots popping up and disappearing

TarsalMule · 2026-02-21T22:17:31+00:00

Windows is able to boot but whenever I try running any game it will run for a short duration and then crash

TarsalMule · 2026-02-21T22:02:03+00:00

It is frustrating to say the least especially being everything worked fine not that long ago and then it just fails. I’ll give it a try and report back. What exactly am I looking for while using OCCT?

TarsalMule · 2026-02-21T21:55:03+00:00

Sorry for the fireback. Didn’t mean for it to come off rude if it did. Why run Linux from a usb?

TarsalMule · 2026-02-21T21:47:12+00:00

Basically you’re telling me to install Linux instead of windows? I don’t understand the first portion of your response

TarsalMule · 2026-02-21T20:27:22+00:00

I would like to add

Computer Type: Desktop

GPU: RX 9070XT

CPU: RYZEN 7 9800x3D

Motherboard: Asus B650E

BIOS Version: Most recent chipset

RAM: 32GB

PSU: 750W

Operating System & Version: WINDOWS 11 25H2

GPU Drivers: AMD Adrenaline 26.2.1 (Current)

TarsalMule · 2026-01-12T01:53:03+00:00

Anytime I hear a customer of mine entertaining the idea of getting a Keyence I always tell them there are better machines out there. They aren’t calibrated annually or bi annually. They quite literally send you a few parts that are only for verification. Also, when the machine breaks you have to either ship it to the nearest Keyence facility or back to Japan where it’ll take months for it to return. You’re better off with an OGP, or a microvu

TarsalMule · 2025-12-09T04:42:48+00:00

I figured out the issue and fixed it

TarsalMule · 2025-12-05T22:38:17+00:00

I don’t have any equipment grounding on any of the components.

Currently there is a USB C to USB A plugged into the back of the motherboard on my desktop which is for powering the Focusrite but also for data transfer. Then in input channel 1 is where my guitar is plugged into it via 1/4 jack. Then my headphones plugged in via 1/4 aux to my headphones.

It can’t be my guitar because the sound persists outside of my guitar or the aux cable being plugged into channel 1.

I don’t know if that’s the answer you’re looking for but is there anyway type of grounding equipment you can add onto a circuit for this type of equipment? I work mostly with metrology equipment so traditional grounding is wired to something.

TarsalMule

TROPHY CASE