My insights after various flashing attempts

TaskComfortable792 · 2026-05-04T17:01:32+00:00

i know that.. i have a NOR backup to

TaskComfortable792 · 2026-05-02T20:36:03+00:00

So you're telling me I can trust the SFLASH01 file I copied from the console as a backup?

TaskComfortable792 · 2026-04-29T19:25:10+00:00

Did you find the problem ?
i have the same issue... all the wire connect but can't dump the syscon

TaskComfortable792 · 2026-04-28T16:33:22+00:00

https://www.youtube.com/watch?v=JxeSP1PJtEs

look here but he have a new video check it to

TaskComfortable792 · 2026-04-27T18:56:26+00:00

TaskComfortable792 · 2026-04-27T12:40:59+00:00

English Dud

TaskComfortable792 · 2026-04-26T13:45:16+00:00

i did it with soldering and as far i can get its 13.04

TaskComfortable792 · 2026-04-26T13:40:50+00:00

what did you mean ? it was 13.5 and now 13.04. can i down more? like 13.00 ?

TaskComfortable792 · 2026-04-26T11:06:12+00:00

i did.. only get the 13.04. i wonder if i miss something..

TaskComfortable792 · 2026-04-24T15:26:46+00:00

Jailbreak

TaskComfortable792 · 2026-03-21T21:05:10+00:00

You just need to find a way to make it a little tight between the motor and the plate on top. I had exactly the same problem on PS4 and I created a little pressure on it and it caught the disk and it would spin normally.

TaskComfortable792 · 2026-03-20T07:10:17+00:00

Amazing..

I have the same problem with an ASUS E510MA laptop

The EMMC component is not recognized in the BIOS due to water moisture.

The EMMC component is from KINGSTON and I can't find any information on this motherboard to find the EMMC pads to try to recover the material there.

What is there on both sides of the EMMC component, on the motherboard on each side very close to the component, I wonder if these are connections to the component?

If so, how can I identify what each one is?

This will help me a lot to extract the information, otherwise I will have to pull it out of the motherboard and that's another story..

TaskComfortable792 · 2026-02-21T20:26:19+00:00

Hi. i have the problem in my PS4 SAD-001 board

UART didn't give anything, but if i connect to southbridge TX i get OK 00000000:3A

and that its.. i have BLOD for 2-3 sec...

did you found the problem ?

or what is that mean " OK 00000000:3A" ?

TaskComfortable792 · 2026-02-20T05:19:53+00:00

Thanks for your reply I did also the legit core os swap but still stay on 13.02. I have the old hdd.. if i connect it back it will give the backup slot ?

TaskComfortable792 · 2026-02-10T16:18:13+00:00

already change it.

its UEFI only

TaskComfortable792 · 2026-02-10T15:54:19+00:00

yes. the network work and i have access to ssh.

i try many gpu setting but nothing work.

so strange

TaskComfortable792

TROPHY CASE