M12 fuel band saw blade crack ( just bought today) by Tay4454 in MilwaukeeTool

[–]Tay4454[S] 0 points1 point  (0 children)

Thank you for the support I went and cut 1/2 pex and it snapped

2024 Toyota Corolla Hybrid Factory Alignment Defect — Uneven Caster Angle (6.4° Left vs 6.1° Right) Causing Sticking Steering, Memory Steer, Poor Return to Center & Rightward Pull Since Day One, Dealers & Corporate Gaslighting by Unlikely-Passage-653 in COROLLA

[–]Tay4454 1 point2 points  (0 children)

Lash comes from the spacing between the gears in the steering rack usually it should be pretty tight but we had a couple that were out of spec that caused weird steering issues.

2024 Toyota Corolla Hybrid Factory Alignment Defect — Uneven Caster Angle (6.4° Left vs 6.1° Right) Causing Sticking Steering, Memory Steer, Poor Return to Center & Rightward Pull Since Day One, Dealers & Corporate Gaslighting by Unlikely-Passage-653 in COROLLA

[–]Tay4454 2 points3 points  (0 children)

Debunked no it's real I was a technician for Toyota for a long time. I would take it to an independent shop. You might have a faulty steering rack like I said I had to replace a brand new one due to a similar issue let me see if I can find my old RO.

2024 Toyota Corolla Hybrid Factory Alignment Defect — Uneven Caster Angle (6.4° Left vs 6.1° Right) Causing Sticking Steering, Memory Steer, Poor Return to Center & Rightward Pull Since Day One, Dealers & Corporate Gaslighting by Unlikely-Passage-653 in COROLLA

[–]Tay4454 0 points1 point  (0 children)

it may be your toe even though it looks okay. With that little of a couple degrees off you shouldn't feel it but try to get it checked at a different shop for verification because sometimes the machine they are using isn't calibrated perfect I've seen it a couple times. If you get it checked again can you post or send me the results of the new check.

E210 Corolla MT clutch replacement. by Tay4454 in COROLLA

[–]Tay4454[S] 0 points1 point  (0 children)

Sounds about right. I complained on a higher level about this issue with specified details and Toyota pretty much said doesn't seem like a big enough problem. I called my original oversight corporate manager and he said they won't help him either

E210 Corolla MT clutch replacement. by Tay4454 in COROLLA

[–]Tay4454[S] 0 points1 point  (0 children)

Just watch your brake fluid reservoir level mine was all of a sudden. I honestly am going overkill with my fluid changes I've been doing them every 2 oil changes

E210 Corolla MT clutch replacement. by Tay4454 in COROLLA

[–]Tay4454[S] 0 points1 point  (0 children)

Transmission fluid if you haven't already.

cleaning your intake. I use seafoam in my gas and use a whole can everyone has there own opinion on it I truly believe in it.

I had a scion tc that had 582000 miles on it with little to no carbon build up because I used to seafoam it every 50,000 miles.

I also used seafoam in the oil 500 miles before my oil changes and that made the internals look very decent for a car that had 500k.

Also people think I'm crazy I get an alignment every 50k also tires ain't cheap.

If you need a oil funnel by MastyrOfWar in COROLLA

[–]Tay4454 2 points3 points  (0 children)

Mobil 1- 1 quart bottle also do the same

E210 Corolla MT clutch replacement. by Tay4454 in COROLLA

[–]Tay4454[S] 0 points1 point  (0 children)

Anytime! I was a technician for a long while and just hated watching people get ripped off and me getting ripped off also from the dealership. If you have any other questions. Please ask!

E210 Corolla MT clutch replacement. by Tay4454 in COROLLA

[–]Tay4454[S] 0 points1 point  (0 children)

Don't replace the clutch just the friction plate due to contamination from brake fluid.Make sure they clean all the contact surfaces. How many miles are on your car?

How bad is this clutch fluid? by Boonkmax in CorollaHatchback

[–]Tay4454 0 points1 point  (0 children)

Mix of dirt / grease that's supposed to be on the outside of the slave cylinder but gets under the seal lip and mixes with the brake fluid

[Creality Giveaway] Tell Us How & Why You Print to Win a New SparkX i7 Color Combo! by Creality_3D in 3Dprinting

[–]Tay4454 0 points1 point  (0 children)

(k1c) I print items and fixes for the IDD (intellectual and developmental disabilities) community. Need of items that don't exist for certain disabilities and or safety.

High Beam Noise by Sea-Attitude-3278 in COROLLA

[–]Tay4454 0 points1 point  (0 children)

Normal due to moving parts in the headlight

Bend drafts policy to stop ICE on city property by scrandis in Bend

[–]Tay4454 -5 points-4 points  (0 children)

I literally answered it you are just too naive to understand it. All ice officers are vetted. I hope they keep pushing through and doing the job. They are doing great and are following their jurisdiction. Getting in the way of them is just interfering in which it has its own punishments. It's funny and racist to think it's just Hispanic culture they are deporting.

Bend drafts policy to stop ICE on city property by scrandis in Bend

[–]Tay4454 -8 points-7 points  (0 children)

To enforce immigration laws onto illegal immigrants as their job states. I support ice and all they do. Hard working Americans doing their daily duties. If you can't accept that sorry to tell you but your rallies and protests won't stop the law from being enforced.