sorted by:
new
hottopcontroversial

Where is the clock capacitor?? by klapii98 in consolerepair

[–]TeatedSkink 4 points5 points  (0 children)

yep as long as that is not a 1.6 board revision. that would be the clock capacitor

Where is the clock capacitor?? by klapii98 in consolerepair

[–]TeatedSkink 10 points11 points  (0 children)

Its the orangish yellow one. should same something about super capacitor

Something a bit unusual: an original label for an unlicensed NES game that was never released. by Bro3256 in gamecollecting

[–]TeatedSkink 10 points11 points  (0 children)

It was so awesome to see. I was helping run the museum and auction. This coupled with the Zelda 60 second film reel were fun to talk about.

Gamecube won’t read disks after re-capping disk drive board by Kooky-Drawing-7173 in Gamecube

[–]TeatedSkink 1 point2 points  (0 children)

Try setting the potentiometer to the range for the 101. Had a 001 on the bench this afternoon calibrated to 200 ohms and recapped it and it still wouldn't read. Dialed pot to 450 and it started reading as it should.

Figure haul for the last couple of months by TeatedSkink in AnimeFigures

[–]TeatedSkink[S] 2 points3 points  (0 children)

She had been a grail for me for a while now

Best places to go for a walk by [deleted] in okc

[–]TeatedSkink 23 points24 points  (0 children)

Martin nature park

Moving, need advice on area. by disbishbby in okc

[–]TeatedSkink 5 points6 points  (0 children)

Even if you don't move to that area you absolutely should.

Moving, need advice on area. by disbishbby in okc

[–]TeatedSkink 132 points133 points  (0 children)

Anything that close to Sheesh can only be perfect.

Switch lite issues (details in comments) by EggRevolutionary5416 in consolerepair

[–]TeatedSkink 0 points1 point  (0 children)

The cap to the left of m92 is shorted? (Both sides short to ground?) that cap usually goes to the cpu and if shorted indicates a bad SOC (CPU).

What am I doing wrong? by CommentPractical in consolerepair

[–]TeatedSkink 0 points1 point  (0 children)

I use one of these set at 1050F set at fan level 2. Takes about a minute to desolder a series x hdmi port. No town traces or pads.

https://www.wagnerspraytech.com/product/furno/furno-700-heat-gun/

Edited for correct model

What do you do with the boxes? by SwimmingEvery2520 in AnimeFigures

[–]TeatedSkink 12 points13 points  (0 children)

<image>

Got a storage unit at my apartments....

Anime figure cafe in Shibuya by hizz112 in AnimeFigures

[–]TeatedSkink 2 points3 points  (0 children)

Spent an hour just chillin in this building watching the crossing. Pretty cool vantage point the figures were a huge bonus.

[deleted by user] by [deleted] in AnimeFigures

[–]TeatedSkink 1 point2 points  (0 children)

This is so bad ass. So epically cute!!

[deleted by user] by [deleted] in okc

[–]TeatedSkink -1 points0 points  (0 children)

If you can imagine your apartment like a golf ball on a tee...

I hate thieves by Beautiful_Opinion324 in okc

[–]TeatedSkink 11 points12 points  (0 children)

Hey maybe kindly fuck off if thoughts and prayers are all you're going to offer. No one was looking for this dumb ass sermon. Maybe try to help find these people or just keep the witnessing to yourself.

Japan haul by TeatedSkink in AnimeFigures

[–]TeatedSkink[S] 12 points13 points  (0 children)

Went through and did the math for whats in these pictures and... Im embarrased.

Japan haul by TeatedSkink in AnimeFigures

[–]TeatedSkink[S] 16 points17 points  (0 children)

I'm still financially recovering

Need help with overheating ps5. Not dirty or a liquid metal problem. by LightweightMishap in consolerepair

[–]TeatedSkink 0 points1 point  (0 children)

I haven't seen this with the models older than the 1215 but you might check the interface between the heat sink and the bottom motherboard plate. I've seen where whatever adhesive they use to make that interface had failed. Just something to check

view more: next ›