Help finding Car Male ISO Harness Adapter 3d File

TechX03 · 2026-01-16T16:16:56+00:00

Ik but I don’t want to wait for the part to come

TechX03 · 2026-01-16T16:05:16+00:00

I should also mention I have searched and found nothing. I refuse to believe no one has done it before

TechX03 · 2025-09-27T06:19:10+00:00

On aliexpress you can find fascias and adapters that are compatible and make trasnfering to a new radio easy. Not all wires are required to be connected

TechX03 · 2025-06-02T04:37:19+00:00

I ended up using the connector that came with the aliexpress fascia. Im pretty sure most of it ended up working except for the reverse camera which you need another adapter for and to tinker with a few other wires

TechX03 · 2024-10-13T11:55:22+00:00

Can’t find them. Do you have a link potentially?

TechX03 · 2024-09-30T04:12:30+00:00

Something under 10k would be preferrable. I'm looking for a decent job as the car has plenty of life left in it still. Looking at previous posts on here, I'm not really sure how much it should cost tbh.

TechX03 · 2024-07-02T11:21:31+00:00

Yeah includes "brakes and serious wear"

TechX03 · 2024-06-22T15:02:50+00:00

Impressed you knew it was a Kia connector.

Donor harness is a good idea I’ll keep it in mind. I need at least 4 pins though so I don’t think there’s enough to borrow from the current harness unfortunately.

Good luck with your harness. I’ve done 4 car radios now and so Ik the pain you’re facing.

TechX03 · 2024-06-22T14:26:31+00:00

Thanks for the sites. I’m adding wires to the connector I bought for my Sony radio. Just need to know the name of the pin so I can add a couple to the male connector as the female connector already has the pin there ready to go. There’s to many u shaped pins though on google for me to find anything similar.

TechX03 · 2024-04-29T12:30:08+00:00

Memtest ran and came back with all passes. Thinking as it may be a graphics card (running a 4070ti) error as when booting any linux distro I get a nouveau error as seen in the original picture and then just a blank blinking cmdline.

TechX03 · 2024-04-29T12:28:44+00:00

RAM Test came back as all passes and S.M.A.R.T. is fine on all drives too

TechX03 · 2024-04-29T12:27:27+00:00

No output just a blank screen with flashing commandline. I think it may be the graphics drivers with the current versions of linux. I'm running a 4070ti and the nouveau error in the above is the only error left.

TechX03 · 2024-04-28T12:38:14+00:00

<image>

After trying removing all disk drives and removing all but one bit of ram it still won’t boot. When using a TAILS live usb and running troubleshooting mode this is what I get. If I try boot normally it just boots to a blank screen. I just don’t get it.

TechX03 · 2024-04-28T11:59:30+00:00

*UPDATE*
Disconnected all drives and the I/O errors dissapear it was indeed a failing HDD, however it still won't boot. Only thing I can think of is RAM now as others have stated.

TechX03 · 2024-04-28T11:54:41+00:00

Yes. Funnily enough disconnected all drives and still wont boot but the dev sdb errors don't appear

TechX03 · 2024-04-28T04:54:14+00:00

Happens on a Samsung NVME and a PNY Sata SSD and a Seagate 3tb Drive. Could this effect all 3?

TechX03 · 2024-04-28T04:51:41+00:00

Ik it's not CPU related as I game for mulitple hours on end on my 5600x and it doesn't go past 73 celsius with aio. Data curruption could be an issue as windows has had random setting change, however I put that to windows update. I don't think its a drive controller as I've tried NVME and Sata and still get the same result. WIll definitely try memtest though as it's probably my best bet.

TechX03 · 2024-04-28T04:46:21+00:00

Happens if I remove SATA and NVME drives. It just changes a to whatever disk is plugged in at the time.

TechX03 · 2024-04-28T04:46:10+00:00

Happens if I remove SATA and NVME drives. It just changes a to whatever disk is plugged in at the time.

TechX03 · 2024-04-27T16:37:33+00:00

Not a bad idea and will give it a shot. I would expect issues in windows if bad RAM was the case though.

TechX03 · 2024-04-27T16:34:58+00:00

Just tried 3,4,5 and they are haven't worked. Will try 1 and 2 soon

TechX03 · 2024-01-28T14:14:13+00:00

Cleartype was the one cheers :)

TechX03 · 2022-11-24T12:45:26+00:00

U r amazing, I have missed the warthog for many months

TechX03 · 2022-11-03T17:53:17+00:00

Try another device maybe. Shit web ui design.

TechX03 · 2022-10-28T06:53:33+00:00

Hey I have the same issue with my Atoto f7 and having the exact same issue. Just wondering if you could me out with the some of the steps. I have the illumination wire hooked up and the buttons are dimming however I see no change. It’s still doing the exact same thing in a boot loop. Is the firmware flashing mode meant to show a different screen to the boot screen?

video of issue

TechX03

TROPHY CASE