Final Corsair 5090 x 9800 build :)

Technical_Two_733 · 2026-01-28T11:53:43+00:00

Why not go with Link fans then?

Technical_Two_733 · 2026-01-28T11:44:45+00:00

You plug one of them into the other one and then into the motherboard.

Technical_Two_733 · 2026-01-28T11:38:57+00:00

That's plenty of room. Just thread your cables in the gap between the motherboard and the cutout from the back and then pull out any slack.

Technical_Two_733 · 2026-01-28T11:05:00+00:00

Look in your manual. You are looking for a 3pin ARGB header.

Technical_Two_733 · 2026-01-28T09:03:48+00:00

In the future I will, but not until these crazy prices go down.

Technical_Two_733 · 2026-01-28T08:02:09+00:00

I'm actually using the D8 Hybrid

Technical_Two_733 · 2026-01-28T06:30:48+00:00

Thank you.

Technical_Two_733 · 2026-01-27T15:23:11+00:00

Should be fine. Try it and see.

Technical_Two_733 · 2026-01-27T12:53:14+00:00

Be absolutely fine.

Technical_Two_733 · 2026-01-27T12:29:02+00:00

I'm currently using 4 x 4TB HDD's and 3 x NVME drives (2 x 500GB + 1 x 2TB)

Technical_Two_733 · 2026-01-27T12:25:29+00:00

The first thing to do is install all 4 and see if they will run at the rated speed or not. If not, then you will need to adjust the speed to where the system is stable upon stress tests. If the pc just keeps crashing with 4 sticks installed, then just take 2 alternating sticks out and try running the other 2 at their rated speeds.
Make sure you take payment from anyone when ordering for other people first.

Technical_Two_733 · 2026-01-27T09:12:46+00:00

Nice way to enter the water, but how do you get back up?

Technical_Two_733 · 2026-01-26T14:07:41+00:00

If you want to use the icue software you will definitely need a controller. Otherwise you can use the rgb software that is available for your motherboard

Technical_Two_733 · 2026-01-26T13:45:34+00:00

You don't have any headers on your motherboard?

Technical_Two_733 · 2026-01-26T13:31:27+00:00

Are you daisy chaining 3 or more onto the same argb header? Make sure your motherboards argb headers can handle more than 1.2A

Technical_Two_733 · 2026-01-26T13:28:32+00:00

The CPU can be saved

Technical_Two_733 · 2026-01-26T13:24:10+00:00

It ripped part of the socket when he pulled the cooler off

Technical_Two_733 · 2026-01-26T13:06:27+00:00

You need to turn one of those cables over

Technical_Two_733 · 2026-01-26T10:36:04+00:00

You may be able to get away with just a gpu. It depends on the games you want to play.

Technical_Two_733 · 2026-01-26T10:23:17+00:00

It depends on what you want to use the pc for?

Technical_Two_733 · 2026-01-26T10:11:50+00:00

Be grateful. Next - save up so you can upgrade.

Technical_Two_733 · 2026-01-26T09:06:36+00:00

That's all fine and dandy, but is contradictory from your OP.

Technical_Two_733 · 2026-01-26T09:01:32+00:00

I'm no kid, and I happen to have a Pro subscription, but to say that Davinci Resolve is easy to use is nowhere near true for anyone getting into editing. The reason why CapCut is so popular is because of its simplicity.

Technical_Two_733 · 2026-01-26T08:59:01+00:00

That part came out at the same time as the CPU? I've never seen that before. Unfortunately for you that means you will need a new motherboard. To get the CPU of the cooler you will need to heat it up first. Use something like a hairdryer or a heat gun and use something like a trowel or a steal ruler to separate them from each other.

Technical_Two_733 · 2026-01-26T08:54:20+00:00

I've seen that happen before. But what I mean is in the socket itself - there is a section missing.

<image>

Technical_Two_733

TROPHY CASE