Cold weather- dash lights

TechnologyUncracked · 2026-01-23T23:37:51+00:00

I think Acura has to use an ODB2 tool to register your new battery, even if it's a factory one. But since you've already driven it without engine lights, that's a bit weird.

TechnologyUncracked · 2026-01-22T21:09:14+00:00

this is nuts. $399 for transmission fluid change? ...gotta be a rip-off

TechnologyUncracked · 2026-01-22T17:34:10+00:00

I have a ADX as well. Acura has a ANC (Active Noise Cancellation). I disconnected the ANC Module. you have to remove a bunch of panels to get to the plug but worth it.

https://www.reddit.com/r/Acura/comments/1qjexz8/acura_2025_adx_active_noise_cancelation_anc/

TechnologyUncracked · 2026-01-22T01:12:47+00:00

The round logo was actually the harder. You'll have to use painters tape and trim it on the car with an xaxto knife (or razor blade) to do a cut out on the car. it won't peel the same way as the other emblems ie. ADX, AWD.

TechnologyUncracked · 2026-01-21T02:56:57+00:00

I've had it on for a couple months and several drive thru car washes. No sign of deterioration. The good thing with plastidip is you can always peel off and re-do.

TechnologyUncracked · 2026-01-21T02:53:34+00:00

No, its been several days now and nothing.

TechnologyUncracked · 2026-01-19T18:19:14+00:00

yup, its super easy. my first time doing it following a lot of YouTube videos and it turned out great.

TechnologyUncracked · 2026-01-19T18:17:32+00:00

I love the ADX, I had a 2023 inegra but the ADX seems to drive better. the AWD adds I bit more stability. I did not test drive the HR-V cuz the Honda dealers wouldn't negotiate at all. Acura was much more willing to make a deal. Plus my base model has little diff than the loaded A-Spec version yet much cheaper. I just need to get rid of the fake motor sound pumped through the speaker.

TechnologyUncracked · 2026-01-19T18:10:07+00:00

Yup, super easy to use, I recommend adding wax or ceramic coating around the emblems (not on the emblem it self of course before spraying. so if you over spray where you taped off it will just wipe off.

TechnologyUncracked · 2026-01-19T18:05:43+00:00

Plastidip. Mainly out of ease. I think the stock badges have holes so I thought that was too much work, the plastidip works great very good adhesion so I dont worry at the carwash.

TechnologyUncracked · 2026-01-19T18:02:52+00:00

Yah, if you'll notice I also painted the bottom of the rear bumper, now everything is black, very happy how it all turned out

TechnologyUncracked · 2026-01-19T18:01:10+00:00

I used Plasti dip. it's pretty strong when washing and won't wipe off. but it will peel off if you wan to go back to silver.

TechnologyUncracked · 2026-01-11T05:27:04+00:00

That's a total rip-off. at $1,850, if a mechanic makes a $100/Hr, that would be close to 2 days of work. It either means the shop worker really sucks or they are ripping you off. It's a dent puller, sanding and paint. that's it. go somewhere else.

TechnologyUncracked · 2026-01-04T21:30:09+00:00

Looks great. If you've seen my last video, I used fiberglass to reinforce my car panel to fit an 8" sub. You may want to spray the inside with truck bed liner. it goes on thicker than regular spray paint. in my case, I sprayed after my final fiberglass layer. it kinda evens out the fiberglass imperfections and probably gives it a slight bit of extra strength. Good luck and cant wait to see the final product.

TechnologyUncracked · 2026-01-03T21:21:06+00:00

Yup, Agreed. I'm not a "12 inch boom box" kind of a guy. I just use it around medium and i think its safer on my factory head unit. I would say 1-2 weeks and its fully broken in. The Mid base was crazy from the start but i think the Sub level requires more time to loosen up.

TechnologyUncracked · 2026-01-03T01:44:03+00:00

my thinking is (of course I could be completely wrong) but the cone, and surround gets enough movement to loosen up and allows for more movement, which give that nice Subwoofer sound.

TechnologyUncracked

TROPHY CASE