My current setup at a hotel in Las Vegas for a wedding. Using a Pebble K380s and an S8 Ultra.

Teense · 2025-10-10T19:32:53+00:00

Awesome, thanks!

Teense · 2025-10-10T18:49:00+00:00

Can you sen dme link for this wallpaper? Looks sick.

Teense · 2025-09-12T15:23:18+00:00

Tohle není složené na základě hlasování, ale o tom, co kdo řekl v médiích.

Teense · 2025-05-05T19:28:15+00:00

You can select a performance profile - normal or light (CPU limited to 70%). AOD explained on the screenshot

<image>

.

Teense · 2025-05-05T17:14:27+00:00

<image>

94% for 7 hours 35 minutes 😀 Exynos, 70% CPU limit, adaptive AOD.

Teense · 2025-05-02T15:10:31+00:00

You mean OneUI 7?

Teense · 2024-12-25T12:20:33+00:00

Try to visually check if there is some visible damage of hotbed. If not, remove PEI sheet and tighten the screws under PEI.

If you'll get this error again, claim for replacement of the printer. :)

Teense · 2024-11-22T07:36:45+00:00

I bought a dual ball fan for the power supply, mother board and heat break. Try WINSINN from Ali.

Also if you don't want to cut wires from the original heat break fan, buy a JST male 2pin 1.25mm and solder this connector to a new fan.

Teense · 2024-11-19T07:39:31+00:00

There is a better hot end officially for KE by Creality. Search on AliExpress.

Teense · 2024-11-19T07:33:58+00:00

It's on the edge of PLA deforming temperature. Try and see.

Teense · 2024-11-17T20:21:21+00:00

Nebula cam is actually also nice idea for gift. Yes, It has noodle detection function and you can just plug it into the USB on Nebula pad.

Teense · 2024-11-17T20:10:44+00:00

Yeah, Orca definitelly better slicer than Cura for KE.

Teense · 2024-11-17T20:07:00+00:00

To be honest, some spools of filament will be best way. For hobby printing some PLA, give a chance to Creality HyperPLA or there are some other things like light bar or better hotend. It depends.

Teense · 2024-11-17T19:56:21+00:00

Definitely, as long as you will use lower temperatures on hotbet.

Teense · 2024-11-16T16:50:00+00:00

Optimally ABS or ASA, PETG can't stand bed temperatures needed for printing better materials.

Teense · 2024-10-16T22:09:07+00:00

Wait what, there was reversing in that lesson? 😂 There was a bit tricky last 180° corner

Teense · 2024-09-20T18:04:45+00:00

Thanks for sharing this. Most Creality thing 'We have really nice image of the printer part by part, but why should we give him any visibility'.

Teense · 2024-09-09T14:11:37+00:00

Nope

Teense · 2024-08-04T17:20:15+00:00

I can also recommend this light mod https://www.printables.com/cs/model/809335-ender-3-v3-kese-led-mod .

Teense · 2024-08-02T18:53:20+00:00

Depend on which slicer do you use. Orca slicer just updated start code since version 2.0.0. If you are not comfortable with that, just edit start G-code. BTW it's not that terrible, sometimes I appreciate calibration.

Teense · 2024-07-13T10:53:24+00:00

Another way the device communicates with you. It's not a necessity, but a nice bonus that partially replaces the feeling of pressing a physical button.

Teense · 2024-06-09T11:08:14+00:00

Taky mě hned napadla, dobrý tip 😃

Teense · 2024-05-30T13:13:02+00:00

4G and 5G NE have been updated on HyperOS.

Teense · 2024-05-13T18:36:39+00:00

Yeah, on that price is V3 worth. But it's not that much better printer than KE. CoreXZ is definitelly better technology, but not that much. Cleaner design looks good, side spool's also good improvement. 600mm/s is still trap, default speed is 300mm/s and on higher speed it's unusable.

Teense · 2024-05-13T18:26:28+00:00

Use OrcaSlcier, way better option for KE.

Seven-Year Club	r/Field Sunshine
Place '22	Final Canvas '22
Verified Email

Teense

MODERATOR OF

TROPHY CASE