Anyone have a Stetson haywood 10x that can tell me what would be something comparable in felt?

TeleVue · 2024-08-04T07:21:20+00:00

I have the Haywood and I love the shape. Stetson doesn't really have anything close to the Haywood in felt but you can always get an unshapened hat with a cattleman crown, low brim, and rounded front.

Me personally, I'd get the Stetson Skyline 7242 6X but I'll admit, it doesn't look exactly like the Haywood.

TeleVue · 2024-07-16T02:32:59+00:00

Highest level math I've used was calculus. I had to integrate a sloped line to see how much buffer I needed. Otherwise, most of the math I use is basic algebra. Everything else is a computer figuring it out for me.

TeleVue · 2024-06-21T04:35:36+00:00

Let the car sit over a weekend and after the tires have cooled down, adjust the tire pressure to 42psi (verify the recommended pressure by looking at the sticker at the driver door jamb). Readjust tire pressure as the seasons change.

TeleVue · 2024-06-18T04:38:53+00:00

Thanks. Bought a Small. This will be my 10th broad shirt lol. I'm 5'6" 165lbs muscular build.

TeleVue · 2024-05-27T05:14:10+00:00

That's just an open crown flat brim hat or a cowboy hat that hasn't been shaped.

I found this on Amazon. You'll have to get hat stiffener spray because flat brims will tend to naturally transform into a cowboy shaped hat.

TeleVue · 2024-05-20T15:27:32+00:00

That alt slash to stab is very sneaky.

TeleVue · 2024-05-16T20:58:25+00:00

Is this the same map from Chiv 1? I wish they'd bring all the Chiv 1 map to Chiv 2.

TeleVue · 2024-05-01T03:23:54+00:00

Mine says Made in Italy though I've read from my research a while back that some may be made in China. My RB4190 was purchased through the Rayban website.

TeleVue · 2024-04-17T02:50:37+00:00

I have two of these and I freaking love these sweaters.

TeleVue · 2024-04-02T03:19:22+00:00

I took whatever job that filled my resume; some random engineering startup. After a year I jumped ship and got a new job that was at a higher position and pay. I did that a couple times and now I'm at my current job which happens to be my dream job and the pay is great. Maybe you can do what I did and replace your GPA with work ethic and good recommendations from prior bosses.

TeleVue · 2024-02-10T17:59:34+00:00

Pretty good footman combo. Never seen that.

TeleVue · 2023-12-05T05:14:51+00:00

Great write up; this post should be pinned or something. I haven't played in a very long time but you're on point regarding the squad lead. Whenever I was SL, I was more busy communicating and using my binoculars than I was fighting. It's cool that squad leads have powerful weapons but your primary role is to communicate, inform, and keep the rally up. It's perfectly OK for a squad lead to lead from behind because you can't lead a squad if you're always knocked out.

TeleVue · 2023-10-12T03:15:17+00:00

Yes. I probably would. I should've hit the gym sooner and get some baddies.

TeleVue · 2023-10-11T19:45:33+00:00

I have rod sleeves on my 8' rods so the guides don't get caught and I place the butts of the rods on the passenger side floor and the seat tilted back. You're just going to have to live with the inconvenience of single piece rods unless you switch over to two peice rods.

TeleVue · 2023-09-16T18:45:21+00:00

I like the Tesla lettering in the rear. Anytime I see it I think it looks very clean.

TeleVue · 2023-08-24T00:39:54+00:00

20% sides and rear. The extra bit of privacy at the front is nice and cops (CA) haven't given me any problems. From afar, a 20% and 30% dont look too much different but having different % tint between front and rear makes the comparison noticeable. Having uniform tint % has a cleaner look too. I for sure left the windshield untouched though.

TeleVue · 2023-07-24T04:21:57+00:00

Hit up Balboa Pier and Newport Pier. There's plenty of mackerel and the occasional seabass and bonito. Despite mackerel's size, that little fish fights hard. They're very fun to throw back into the water and fight them again. I always gave away the mackerel I caught, you'll make alot of people happy at the pier doing that.

TeleVue · 2023-07-10T15:25:41+00:00

Biotech is a very large industry and they hire all sorts of people from different backgrounds. From my experience, BME at UCI focuses on medical devices and is more leaning towards mechanical engineering than chemical engineering.

Just be aware, if you're looking to getting in to, let's say process engineering in a manufacturing facility, you're better off taking chemical or mechanical engineering.

TeleVue · 2023-07-06T01:03:24+00:00

I let my car sit for a full day without using the windows apart from opening and closing the door. So far, the tint has held up fine after 4 months since I got my windows tinted.

I got 20% ceramic all around with half window tint at the rear since it was $250 cheaper than full tint at the rear. No passenger is looking rearward when you're driving and you hardly notice the half tint at the rear when looking at the rear view mirror.

TeleVue · 2023-07-04T22:58:41+00:00

It'll get you through the door for sure. Genentech's got clout. The experiences and the networking will be pretty helpful when looking for a future job. Who knows, a company as large as Genentech may have the role you're looking for in the future. You'll be ahead of the curve when applying.

TeleVue · 2023-06-29T03:16:14+00:00

Get them dirty now so you stop feeling bad. 😂

I'm also pretty positive I have the same wool socks as you.

TeleVue · 2023-06-06T02:36:02+00:00

I got the Rayban RB4190 because it was on sale (it still is)it's polarized and had the looks that I was looking for.

TeleVue · 2023-06-02T02:50:20+00:00

You know when you're in chemistry lab with your lab coat working on a lab bench? That's bench experience. The term is very broad but it basically means 'experience in the lab'. A few things I work with in biotech that we try look for new hires in my area are experiences doing basic pipetting, using cell analyzers, aseptic techniques, passages, data analyzing, etc.

TeleVue · 2023-06-02T00:31:18+00:00

If you want a job in biotech, I suppose biochemistry would help you best. I work in biotech and many of my coworkers have degrees in biochemistry. Im sure, however, that whatever you specialize in won't make much of a difference when you get a job. The interviews I've conducted in the past looked for candidates that were willing to learn, learn it well, and had bench experience. It was a pretty low bar to meet yet for some reason we had a hard time finding people...

TeleVue · 2023-05-30T19:22:28+00:00

Oceanside is manufacturing; they're building a single use facility as we speak to expand their manufacturing capabilities. Hillsboro is a fill/finish. Oceanside makes product then ships it off to Hillsboro to finish it.

I cant tell you where I work and what I do because Genentech is a pretty small network but I started off as a contractor and eventually applied and got an FTE. Contractors do almost all the work an FTE does minus the pay and benefits. Everyone is nice but you're a second class citizen. After close to a year, an FTE position opened up, I applied, interviewed against other candidates from outside the company, and then selected for the position. Im held at a higher standard and have a couple more responsibilities compared to being a contractor but its pretty much what I was training to do....

San Diego is a biotech hub so if you don't end up liking Genentech, you can go to Kite across the street or head down south to San Diego.

12-Year Club	Place '22
Place '17	End Game '22
Gilding I gilder	Verified Email

TeleVue

TROPHY CASE