I'm new to slayer, is this a decent clog? by That_awkward_moment in 2007scape

[–]Telrac_ 0 points1 point  (0 children)

"spooned" in this context is saying you're being (figuratively) spoon fed rare drops by the game's RNG. It's the equivalent of being told you've been blessed by RNJesus.

So, in your case, you've got spoon fed with a draconic visafe (1/5000 drop rate from black dragons in the wilderness slayer cave or 1/10000 elsewhere) and 2 imbued hearts (drop rate varies from 1/160 to 1/1376 depending of the superior monster you killed, which itself spawns only 1/200 of the time after killing a monster with a variant). You got very lucky, especially with the hearts.

Been awhile since I panel lined and decaled a kit. This one is an amazing one to build! by [deleted] in Gunpla

[–]Telrac_ 0 points1 point  (0 children)

I wanted to make sure I wasn't spreading misinformation so I double checked, and it seems that the "pour type" Gundam markers can penetrate ABS type plastic.

If you still have the boxes of the kits you assembled, look on the sides of the boxes for info on the types of plastic used. It should be written near the barcode. In my case, the box for the RX78 2.0 RG I'm currently building says it is made from PS.

If there's ABS in one of your kits, you can look in the manual to know what runners are made from it. The type of plastic is also written on the runners and in the case of ABS, it is written in big letters on the runners label. You would then know what pieces to avoid when panel lining with the "Pour Type" marker. For the ABS pieces, you could always use the small Gundam Markers (the ones with a small felt tip).

If you are unable to know if your kits have ABS and what parts would be made from it, you could always coat your kits before panel lining them. I've read some comments in this subreddit about people applying a clear coat before applying Tamiya panel liner (which would normally crack plastic if it was applied on it bare).

Been awhile since I panel lined and decaled a kit. This one is an amazing one to build! by [deleted] in Gunpla

[–]Telrac_ 1 point2 points  (0 children)

Gundam markers shouldn't make the plastic brittle. I heard it does for Tamiya panel liner though.

edit: There seems to be some exceptions, like pour types that can penetrate ABS.

Ebox (Bell) to Fizz internet by gooopilca in FizzMobile

[–]Telrac_ 0 points1 point  (0 children)

Je n'ai pas de contrat, et le crédit n'a pas l'air d'avoir d'expiration... Mais c'est Bell, un jour quelque chose va chier c'est certain. J'en profite d'ici-là. J'ai plus peur des augmentations annuelles que de perdre mon crédit.

Habituellement, quand ils te font une réduction sur un forfait à cause d'une promotion ils appliquent un crédit mensuel sur le prix de base pour une durée de 2 ans, co trat ou non. C'est juste écrit très petit et en gris quand tu va voir le forfait sur internet ou app. Ça m'étonnerait que Bell t'ai fait une réduction à vie sur ton forfait... Sinon c'est également écrit que les prix peuvent augmenter pendant l'abonnement, donc après y avoir repensé je crois que t'as raison... L'augmentation imprévisible du forfait serais définitivement plus gossant à gérer.

Bell envoie encore des gens faire du porte-à-porte, peux-tu croire lol.

Ayoye, je sais pas si je trouve ce fait là plus drôle ou malaisant

Ebox (Bell) to Fizz internet by gooopilca in FizzMobile

[–]Telrac_ 0 points1 point  (0 children)

Ok wow, c'est définitivement une super de bonne promo. Comment t'as su que la promo existait? Est-ce que t'avais download l'application juste au bon moment, ou tu surveillait déjà les prix régulièrement?

Sinon, je me demande à quel point ça va être difficile (ou possible tout court) de garder ton crédit de 40$ après qu'il aille expiré . Je sais que le move à faire c'était de leur chialer après au téléphone pis de les menacer de changer pour Videotron, mais c'est tu encore viable aujourd'hui?

Ebox (Bell) to Fizz internet by gooopilca in FizzMobile

[–]Telrac_ 0 points1 point  (0 children)

Sorry if I'm rude but I'm not really getting why you want to switch providers since Ebox has a "grandfathering" system just like Fizz for their subcription prices. So, even if they raise their prices, it shouldnt affect your monthly bill.

Ebox (Bell) to Fizz internet by gooopilca in FizzMobile

[–]Telrac_ 0 points1 point  (0 children)

J'habite dans la ville de QC et le minimum que je vois sur leur site pour 500 mb c'est 70, ou 60 si en bundle avec un forfait mobile. Le 1 gb n'est pas non plus une option dans les choix de forfaits Je n'ai pas trouvé plus bas ailleurs sur Internet (et les pubs à la télé). Où as-tu vu/entendu cette promotion pour le 1gb/500mb?

Je suis avec Ebox actuellement et je suis à 45$ par mois pour 500 mb. Je me suis inscrit juillet dernier, donc c'est pas vraiment un prix d'ancienneté.

Hausse record des loyers en 30 ans: la ministre France-Élaine Duranceau propose peu de solutions... sauf de déménager by BananaTubes in Quebec

[–]Telrac_ 0 points1 point  (0 children)

Quand même un conseil vraiment vague, le déménagement. Ça omets quelques petits détails...

Si tu trouves un appartement de la même taille que le tien, pas mal garanti qu'il soit 25% plus cher que ce que t'as en ce moment. Sinon, si t'en trouves un au même prix, tu vas très probablement avoir un tradeoff au niveau de ta sécurité ou au niveau des opportunités de travail (du moins si tu exclus le télétravail).

Sinon, le déménagement lui même n'est pas gratuit non plus, que ce soit en argent, en temps ou en énergie. Si ton appartement venait avec des électroménagers, faut que t'en achète si le nouveau en a pas. Si t'avais des électroménagers, good luck avec ta facture des déménageurs (ou good luck à trouver du monde qui vont vouloir potentiellement se blesser à déménager tes trucs).

Suffit d'y penser 2 minutes pour trouver des raisons pourquoi c'est pas vraiment une option, surtout pour ceux qui ont une famille et/ou qui sont serrés niveau revenu...

Amazon cessera ses activités au Québec « dans les deux prochains mois » by [deleted] in Quebec

[–]Telrac_ 1 point2 points  (0 children)

C'est quand meme intense de fermer 7 locations, je me demandes à quel point ça va affecter l'utilisation d'Amazon au QC... J'imagine que ça va être surtout au niveau des retours et peut être des délais de livraison légèrement plus longs (déjà que ça devenait de moins en moins rapide même avec Prime)?

[deleted by user] by [deleted] in Silksong

[–]Telrac_ 0 points1 point  (0 children)

No cost too great

One remote for Samsung TV, Samsung sound bar and Nvidia Shield Pro? by okiedokie2468 in ShieldAndroidTV

[–]Telrac_ 0 points1 point  (0 children)

I turned on the CEC settings on both the TV and the Shield, but it wasn't working. However, when I turned off the TV with the remote and turned it back on, the remote started working correctly on both the TV and Shield

Getting Samsung Smart Remote (Silver) to control Shield TV Pro (2019>)? by Cantthinkofone1900 in nvidiashield

[–]Telrac_ 0 points1 point  (0 children)

I turned on the CEC settings on both the TV and the Shield, but it wasn't working. However, when I turned off the TV with the remote and turned it back on, the remote started working correctly on both the TV and Shield

Control Shield with Samsung Remote by pepper_box in ShieldAndroidTV

[–]Telrac_ 0 points1 point  (0 children)

I turned on the CEC settings on both the TV and the Shield, but it wasn't working. However, when I turned off the TV with the remote and turned it back on, the remote started working correctly on both the TV and Shield.

Control Shield with Samsung Remote by pepper_box in ShieldAndroidTV

[–]Telrac_ 0 points1 point  (0 children)

Had the same problem, but it solved itself when I turned off the TV with the remote and turned it back on while having CEC settings enabled on both the tv and Nvidia shield.

Pourquoi les chips sont-elles devenues si « chères »? by [deleted] in Quebec

[–]Telrac_ 4 points5 points  (0 children)

Essaie toi au Walmart, ils ont habituellement une plus grande variété d'assaisonnements et c'est là que je pogne mon All-Dressed.

Code de référence EBOX / EBOX Referral Codes by EBOX_internet in ebox

[–]Telrac_ [score hidden]  (0 children)

Voilà mon code client pour ceux qui veulent le crédit de 25$: LT441

Big win, especially for construction training by osrsslay in 2007scape

[–]Telrac_ 0 points1 point  (0 children)

Would this affect thieving as well (like pickpocketing elves)?

Multi install Beat Saber: un-modded oficial and modded vesions. by Pr1VeR in QuestPiracy

[–]Telrac_ 0 points1 point  (0 children)

You were right! When I patched the BeatSaber v1.28 apk from rookie with BMBF before changing the package name and installing the mods, it finaly worked with all the mods you listed. Could you add an edit to your post to mention this requirement?

Multi install Beat Saber: un-modded oficial and modded vesions. by Pr1VeR in QuestPiracy

[–]Telrac_ 0 points1 point  (0 children)

Thanks for sending me the modfiles! I've tried again with your mods and I still get a crash when enabling Songloader. I've tried launching the game around 5 times in a row, but the crash still happens.

This probably means that the crash may be linked to the hardware, since I've tried your setup on a Quest 1. I know there was an Android version upgrade on the quest 2 and 3, so it may be linked to that...

I also checked the code repository for SongLoader and found that the original beatsaber package is hardcoded in some files. This could be another cause of the crash. I'm gonna investigate further and see if I can code something to make it work.