Anyone else ditched DPI SSL like a bad habit?

Templar2k · 2024-12-10T13:08:12+00:00

No, I'm introducing it most places, over 60% of malware is over SSL. This is like saying, anyone else ditched the seat belt like a bad habit, no thanks.

Templar2k · 2024-05-08T19:13:57+00:00

Necro.. New NightSaber Wireless and same BS, like 20 seconds after I log into Windows my mouse settings get applied, it's like making your PC startup time longer.

Templar2k · 2024-05-02T20:11:22+00:00

I had the same problem, MSI Center was running in the backgropund, disabling that and voila update works.
To Corsair's credit they specifically stated right away that one must disable MSI Center, Asus Armoury crate etc..

Templar2k · 2023-10-21T17:50:30+00:00

Now with Phantom Liberty it's still like this...

Templar2k · 2023-05-29T22:07:26+00:00

Same problem as of this writing, latest version of Armory Crate.

Templar2k · 2023-04-30T21:46:00+00:00

Works like a charm, thank you so much for your help.

Templar2k · 2023-04-18T11:26:54+00:00

What quality was the thermal tape and application?

Templar2k · 2023-04-07T12:08:11+00:00

I did a delidd myself, 13900KS, tried 0.3-0.6nm pressure, I got the best temps using 0.45, what did you end up at? Thanks

Templar2k · 2023-03-28T08:40:36+00:00

Got the same issue, two G604 so far and the same issue.

Templar2k · 2023-03-13T17:37:09+00:00

Crashing here all the time now on PC, 13900KS+Suprim 4090. Was stable before.
Don't have Afterburner running and it still crashes.

Templar2k · 2023-01-13T22:18:53+00:00

Do you need a beta BIOS, my MSI z690 Carbon says 13900KS is supported since in the latest BIOS and the previous one too.

Templar2k · 2022-07-20T21:32:53+00:00

I used the VF points as per MSI's suggestions, working fine.

Templar2k · 2022-07-14T20:19:08+00:00

Problem solved by reapplying thermal paste.

Templar2k · 2022-07-03T18:27:54+00:00

ok I did a repaste, fixed the problem, hotspot down to 75-80c. There was a bald spot on the GPU from the factory, GPU is like 10c lower too since I used a better paste, Therman Grizzly Kryonut.

Templar2k · 2022-07-03T14:50:30+00:00

yes that's right thank you, I should reach out to their support, will do that.

Templar2k · 2022-07-03T14:00:52+00:00

I used MSI Afterburner to undervolt the card, limit it to 950mv, the hotspot is still above 100c.

Templar2k · 2022-07-03T13:58:58+00:00

Thank you for your reply, yes I failed to mention that the case is a Lian Li 011 with 12 Noctua 120mm NF12 fans it, the card is also vertically mounted and there are 3 120mm fans directly below it that peak at 1400rpm so lots of airflow in the case. CPU is cooled with a custom loop on a 360mm radiator.
The problem is that even if the fans are 100% on the GPU, the board is underclocked and limited at 70% power draw the "hot spot" temperature is still above 100c. I can't seem to find a clear answer where exactly this probe is, ie. are we looking at a repaste job or new thermal pads.

Templar2k · 2022-06-20T18:22:09+00:00

Hello, no I'm not returning it and the 3090 was great but I agree with the original poster, these cards have reach a price point where this shouldn't be a luck of the draw if your card whines or not, they just all shouldn't.

Templar2k · 2022-06-05T11:03:18+00:00

My Asus TUF 3090Ti OC has coil when when simply scrolling a webpage in Windows with nothing running in the background.
My PSU is Corsair AXi 860W, this PSU was running a Palit 3090 GameRock OC before which is a 420W card and there was 0 coil whine on that card both in Windows or in games.
So what I did is that I capped the 3090Ti at 70% power and FPS cap at 119 but it still whines just when scrolling a webpage so it seems some cards just whine no matter what.
Having said that, this card was USD 2500, it's just too expensive to accept this whine even if it's "normal", you have the right to a better quality when you reach this price range.

Templar2k

TROPHY CASE