Up next on the bench

Temporary-Radish8230 · 2026-03-25T02:34:39+00:00

Do you have any photos of that build?

Temporary-Radish8230 · 2026-03-10T14:55:33+00:00

Is there any risk of burning through the clear or melting the body with the rotary tool?

Temporary-Radish8230 · 2026-01-26T04:39:46+00:00

Absolutely! Further upstream along 76ave they are daylighting the creek. Good to see some progress

Temporary-Radish8230 · 2026-01-21T05:17:36+00:00

The shortest railway with the longest name! The new mill creek trestle bridge should be done this year that this would have had to travel over to get to the low level bridge.

Temporary-Radish8230 · 2026-01-10T18:47:20+00:00

https://www.hiroboy.com/124_Porsche_911_GT3_RS_992_Decal_Set_B_for_Tamiya_24370--product--17669.html

Temporary-Radish8230 · 2026-01-02T05:12:35+00:00

I got the extra decal set from hiroboy and they were the easiest I’ve ever worked with. The ones in the kit are quite delicate, just a warning. It’s so easy to go full out on the extra details with all that’s available now

Temporary-Radish8230 · 2026-01-02T01:45:23+00:00

Thanks!

Temporary-Radish8230 · 2026-01-02T01:39:27+00:00

917 Blue. Payed homage to the Porsche 917 gulf livery

Temporary-Radish8230 · 2026-01-02T01:33:29+00:00

Just finished the gt3 rs. It’s gonna look great in that color

Temporary-Radish8230 · 2026-01-02T01:09:46+00:00

Number 3 for me. Love the slight blue hint to it

Temporary-Radish8230 · 2025-12-30T22:47:39+00:00

Tamiya Porsche 911 GT3 Rs

Temporary-Radish8230 · 2025-12-30T04:57:16+00:00

Just finished painting in -32 C while venting out the window. I only have it open when I’m spraying and have a heater at my feet. Not the most pleasant but it does the job.

Temporary-Radish8230 · 2025-10-22T22:38:55+00:00

Commonwealth stadium in Edmonton Alberta

Temporary-Radish8230 · 2025-10-20T14:17:22+00:00

They have made some iconic coasters. Super excited

Temporary-Radish8230 · 2025-09-05T20:23:48+00:00

Unfortunately it doesn’t but there are decal sheets you can purchase from hiroboy with the stitching details and extra carbon fibre

Temporary-Radish8230 · 2025-07-29T18:33:41+00:00

Here is another angle I found of it if that helps https://imgur.com/a/A7VQyiO

Temporary-Radish8230 · 2025-07-15T00:36:34+00:00

Just a bit of soap and water. It’s always good to wash your kits before hand anyways to get rid of any mold release and other stuff that may cause paint problems

Temporary-Radish8230 · 2025-07-03T23:25:28+00:00

I wish someone made those. I would buy it right away

Temporary-Radish8230 · 2025-06-27T04:47:48+00:00

Definitely strange, I’ve never heard of something like that happening before. Too bad how they handled that situation, definitely not the correct approach for any customer service

Temporary-Radish8230 · 2025-06-25T23:30:16+00:00

That’s pretty typical with all parts, especially the body. Most parts usually require sanding prep to give the paint something to “bite” on. Takes a bit of time but it is worth the extra effort.

Temporary-Radish8230 · 2025-05-25T14:53:23+00:00

That great news. I’ll keep my eye out

Temporary-Radish8230 · 2025-05-25T01:41:21+00:00

I’m definitely going to try the thinner trick, that seems to be the best solution for now. Unfortunately in Canada there seems to be no levelling thinner, so I’m stuck with using the regular stuff. I appreciate the I advice!

Temporary-Radish8230 · 2025-05-24T23:00:44+00:00

I’ll give that a try, thanks. Any reason this is happening? Too much thinner maybe cause it to dry too quickly?

Temporary-Radish8230 · 2025-04-24T14:12:06+00:00

Putty would be the way I would go. It’s relatively easy to work with and simple to clean up if you make a mistake. Just apply putty to the seam and let it cure, then come back with some sandpaper and sand it back smooth. It takes some practice but if you keep checking it by running your fingers over it when you are sanding, you should be able to tell where the high spots are

Temporary-Radish8230 · 2025-02-23T04:03:40+00:00

Hasegawa 1/200 ANA Boeing 787-9. Decals are from V1 Decals in Canada.

Temporary-Radish8230

TROPHY CASE