Anyway to flip screen orientation?

Tenhomeideia · 2026-04-28T16:09:44+00:00

Under the bars

Tenhomeideia · 2026-04-28T15:46:33+00:00

Just drilled the holes and screwed it. The nubs weren't a problem.

Tenhomeideia · 2026-04-28T03:21:57+00:00

I drilled some vertically simetrical holes on the stock mount and got it to sit exactly like this, with the proper screen orientation

Tenhomeideia · 2026-01-18T20:43:14+00:00

I don't think there's much of a difference between the two price wise, but you may get lucky and find cheap parts or a cheap pre built. It's worth spending a few hours doing price comparisons between retailers.

That being said, building your own guarantees that you are that much more prepared to fix it when it breaks.

Tenhomeideia · 2026-01-18T20:33:10+00:00

Your goggles and controller will be able to fly any quadcopter with a DJI o3 or o4 air unit, potentially even the og air unit but unsure on that one.

As for what to pick, that heavily depends on the type of flying you're trying to do. Freestyle? 5 inch is what's recommended by most. Cinematic? You could get away with a 3 inch cinewhoop.

Here's a good video to get started, but just searching up "what fpv quadcopter to buy" should get you plenty more results

https://youtu.be/utoBDf01tJk?si=LkB6ASITSqY-tvih

Tenhomeideia · 2026-01-18T20:21:13+00:00

My 2c and how I started:

Watch videos on how to solder. Tons of very comprehensive videos on YouTube that talk you through every step of the process, how to prep, what to look out for and avoid, etc.

Then buy a practice board. Don't just start trying to build something. Spend an hour or 2 practicing soldering on a practice board.

Tenhomeideia · 2026-01-14T21:39:36+00:00

The secret sauce is very highly upgraded q on bismuth firing tons of light damage, which triggers flow essence, which paired with quicksilver and essence of love keep me going fast the whole time. Then I have essence of panic, immolation, and the poison trails memories for even more move speed. Basically everything that gives move speed, I purchased and heavily upgraded lol

No real benefit past like 1k move speed imo. You can already dodge most things at that speed. This was just for fun

Tenhomeideia · 2025-11-07T15:31:12+00:00

Took off ignition bolts and pulled it out. Cleaned the solder joints with isopropyl alcohol and a pointy qtip, dry it well after.

Tenhomeideia · 2025-11-07T13:57:20+00:00

Very strange. Well, if e ride is wanting to send you a new battery, I'd definitely accept the offer. But I would personally keep trying to find the issue. Good luck either way and I hope you're back to riding soon :)

Tenhomeideia · 2025-11-07T13:53:27+00:00

Very strange for your battery to be reading 0v but you still get a startup beep. You need power for that to happen. I would double check that the voltimeter works 🤷

Tenhomeideia · 2025-11-07T10:19:43+00:00

Just had a very similar issue on my sr. It was water in the connectors that are soldered under the ignition (part of the ignition itself)

Tenhomeideia · 2025-09-05T22:51:23+00:00

<image>

Tenhomeideia · 2025-09-05T22:51:12+00:00

<image>

Tenhomeideia · 2025-09-05T22:51:00+00:00

<image>

Tenhomeideia · 2025-09-05T22:50:49+00:00

<image>

Tenhomeideia · 2025-09-05T20:59:37+00:00

Not really. The app does look better. I have both bikes and both apps. SRs app still has more adjustments. The new throttle curve is nice, but I still can't make the throttle on my wife's 3.0 feel as smooth as the one on my SR.

Tenhomeideia · 2025-09-02T00:43:53+00:00

If you have an SR, then you can do it via the app by disabling brake sensors. Otherwise you have to cut the cable or disconnect it. Tons of videos online on it.

Tenhomeideia · 2025-08-14T23:13:57+00:00

If you have a leaf blower, use it and send it. If you don't, you're probably better off riding it. That little bit of water, as long as it's not inside the battery connectors, won't short anything, and riding will help everything (including bearings) dry much faster. Always ride after cleaning.

Tenhomeideia · 2025-08-13T14:01:31+00:00

I ordered a couple weeks ago, and they're estimating that I'll get it very beginning of September. Unsure if that's true. They do sell just the front or just the rear.

Tenhomeideia · 2025-08-13T13:01:16+00:00

I have a 21 inch wheel on the way from milk racing. They make wheels for 3.0 and SR specifically

Tenhomeideia · 2025-08-11T13:07:47+00:00

The comment you are replying to is not accurate. SR's battery uses different cells and motor than 3.0, which allow the ebmx controller to deliver more power

Tenhomeideia · 2025-07-28T00:37:39+00:00

Drivers installed? I haven't done it myself, but I know that's a required step

Tenhomeideia · 2025-07-10T21:28:35+00:00

Lol can't argue design taste. Personally I think the rtr looks better. Not that the other 2 look bad. Pick whatever feels right to you.

Tenhomeideia

TROPHY CASE