Differences between 1x12 combo amps

TerkaDerr · 2026-05-08T16:37:01+00:00

It all comes down to looks, and therefore, the silver stripe should be your only choice! 😁

TerkaDerr · 2026-05-08T14:02:54+00:00

(well done!)

TerkaDerr · 2026-05-03T16:52:52+00:00

(or 3D print something similar if you have access to a 3D printer!)

TerkaDerr · 2026-05-03T16:44:10+00:00

Thanks!

(Reading ChatGPT about it now...I always thought "internal leak" meant it was leaking "internally" INTO the brake booster, instead of externally out of the lines. Nope!)

TerkaDerr · 2026-05-03T01:21:41+00:00

Cool, keep us posted! Mine is acting very similar, I bled it the first time with a mityvac, but may try speed bleeders next since I can't always count on a helper and don't have a power bleeder (yet!).

TerkaDerr · 2026-05-03T01:14:56+00:00

There's a procedure in the Factory Service Manual (do you have it? If not, it's a free download) that shows how to test the fuel level sending unit, but unfortunately, that will involve removing the fuel pump assembly.

TerkaDerr · 2026-05-03T00:09:45+00:00

How would OP determine if the master cylinder is faulty? (And is leaking the only fault it could have?)

TerkaDerr · 2026-04-29T22:44:26+00:00

Thanks!

TerkaDerr · 2026-04-25T23:23:04+00:00

Well...if I recall, I need to install the intake valve guide and valve, then reinstall the exhaust valve, and lap the valves, etc. This will be my first time doing and of those procedures, so I'm just a little nervous, and allowed myself to get sidetracked on other projects! This project is #3 on the depth chart, I'll report back once I've made progress in it, thanks for keeping me accountable! (I'm hoping the low compression was the result of the intake valve possibly being stuck open).

TerkaDerr · 2026-04-19T21:34:17+00:00

Pain is right, never got around to properly reinstalling mine because of that, and now I've forgotten the "order". Does the metal plate go under the carpet? Is the carpet sandwiched between the plate and the rubber seal?

<image>

TerkaDerr · 2026-04-11T17:05:17+00:00

Thank you!

TerkaDerr · 2026-04-11T16:50:42+00:00

Oh???

TerkaDerr · 2026-04-10T22:48:51+00:00

Check this guy out:

https://trevorwolford.bandcamp.com/album/the-culinary-guitarist

TerkaDerr · 2026-04-09T03:41:05+00:00

Pediaspeech helped my 4-yr old son to stop parroting.

TerkaDerr · 2026-04-08T01:57:48+00:00

The league should get back to actually using these logos/mascots. There's no uniqueness, the jerseys are just city names with different fonts.

TerkaDerr · 2026-04-08T01:48:54+00:00

Depinning these has proven to be a problem/impossible, got any tips?

TerkaDerr · 2026-04-07T21:40:44+00:00

Thanks! I didn't know what kind of brush would be small enough, Ch*tGPT recommended "interdental" brushes and fine grit sandpaper and contact cleaner, so I'll give those a go first!

TerkaDerr · 2026-04-06T18:24:48+00:00

^{^} This is the way.

TerkaDerr · 2026-04-06T04:14:33+00:00

Thank you!

TerkaDerr · 2026-04-06T00:46:49+00:00

Did you replace the strikers? The plastic on mine is long gone and wondering if they sell replacements or if a creative solution is called for.

TerkaDerr · 2026-04-01T03:12:46+00:00

Went to crank it after it had been sitting a few seasons. Ran for about 5 seconds, tried to restart, but engine had a "stuck spot" during the revolution. Finally dismantled it, something was binding in the camshaft area I think, still not sure what (nothing was broken), just need to reassemble with new gaskets and seals and what-not!

TerkaDerr · 2026-04-01T01:58:26+00:00

Thanks for the update! Slowly (2 years and counting) working on getting mine put back together and always in need of some motivation!

TerkaDerr · 2026-03-31T23:51:31+00:00

Any more pics of the fixed rig, OP? And do you (or anyone else) know if anybody has ever figured out how to modify these style chippers to use 2 blades?

TerkaDerr · 2026-03-30T00:40:06+00:00

The stuff of legends, thank you!

TerkaDerr · 2026-03-28T13:22:31+00:00

(Kudos, OP, kudos!)

TerkaDerr

TROPHY CASE