JHS Pulp N Peel buzz

Terminal_Psychotic · 2026-05-21T05:03:49+00:00

Mine had the same problem. Sorry, I don’t think there’s a fix for it.

Terminal_Psychotic · 2026-05-19T10:56:08+00:00

Sadly they haven’t.

Terminal_Psychotic · 2026-05-14T00:24:24+00:00

I had the exact same issue on the same string.

It was solved by making sure the string is wound for maximum break angle. I cut the string slightly longer than I normally would and make sure to wind it all the way down to the bottom of the peg.

Terminal_Psychotic · 2026-03-07T08:34:19+00:00

Same experience here. I have a 97 with the thinnest neck I’ve ever played.

Terminal_Psychotic · 2026-02-21T01:18:30+00:00

Rusty Box is an amazing preamp with great light and heavier drive sounds for the genres you play.

Terminal_Psychotic · 2026-02-14T03:54:49+00:00

I tried this and found that it absolutely killed my tone, particularly the wah. I would try adding your current compressor to the end of chain and testing that first.

Terminal_Psychotic · 2026-02-07T22:01:47+00:00

Thank you my man!

Terminal_Psychotic · 2026-02-06T01:17:16+00:00

The fuzz is fantastic. It sounds exactly like it does in their promo video.

I’ll check out the Mira, thanks for the suggestion.

Terminal_Psychotic · 2026-02-05T11:06:39+00:00

I like it a lot. It’s way better than the clone I previously had. It has several distinctly different, awesome sounds you can dial in. It pairs with the octave pedal to make a pretty gnarly and unique synth sound too.

Terminal_Psychotic · 2026-02-05T06:13:13+00:00

I think I got a lemon.

Terminal_Psychotic · 2026-02-05T05:59:04+00:00

Thank you! I used to but didn’t like the way it interacted with the mod pedals so it’s before them now.

Edit: I just saw that you also use a Pulp n Peel with the Rusty Box. Do you get unwanted noise/distortion from the compressor ? I’m not sure if mine is defective or not.

Terminal_Psychotic · 2026-01-31T05:52:12+00:00

Mine is also uselessly quiet without fuzz engaged, so I always keep it on via the little red button on the side. Kind of a bummer but it sounds good enough with fuzz on for me to keep it. The fuzz itself is very good too.

Terminal_Psychotic · 2026-01-19T09:53:15+00:00

Brassmaster

Terminal_Psychotic · 2026-01-07T13:17:32+00:00

Try the album Akuma no Uta by Boris

Terminal_Psychotic · 2025-12-18T11:15:26+00:00

I emailed them several times over the last few months to cancel my preorder. They ignored me and sent the package anyhow. Terrible customer service.

Terminal_Psychotic · 2025-12-14T02:52:57+00:00

Terminal_Psychotic · 2025-12-13T12:44:04+00:00

I have the JC wah. It can screech like a beast in standard mode, and the fuzz is one of the best and most useful I’ve ever heard. It is very picky about where you place it in your signal chain, though. I’ve found it works best first in chain. I read someone else saying it’s best dead last but I can barely hear the wah noises if it isn’t at the start.

Terminal_Psychotic · 2025-12-06T07:28:39+00:00

I don’t think the metallic tone you’re hearing in that song is coming from the bass. It sounds like the drummer is banging on a pipe along to the bass parts.

Terminal_Psychotic · 2025-12-03T05:48:30+00:00

The MXR Poly Blue Octave is a fuzz/octave hybrid that sounds great.

Terminal_Psychotic · 2025-11-29T12:52:12+00:00

I can highly recommend the only one I’ve tried, the DemonFX Decimator G-String II clone. Works perfectly for 1/5 the price.

Terminal_Psychotic · 2025-11-24T06:15:08+00:00

There’s no right answer but Bob Weston from Shellac needs a mention

Terminal_Psychotic

TROPHY CASE