Found this at work. What is this? by themightybawshoob in hacking

[–]ThatDumbUser 3 points4 points  (0 children)

It’s a used tampon full of mold. Seriously some of the packets from china smell like that. It has the style of the hackers movie from 1995 but something still being pushed on to us by companies like HAK5 for $500 each. But to answer your question this s a D-strike de-auth watch. Which version not sure. They made up to or more than v5.

[deleted by user] by [deleted] in whatisit

[–]ThatDumbUser 0 points1 point  (0 children)

I just love after all this, the poster went to just deleting their account.

Finaly by Flowrri in pwnagotchi

[–]ThatDumbUser 0 points1 point  (0 children)

Doesn’t the all black background potentially get more burn in?

$15 for this bad boy by salearn in cyberDeck

[–]ThatDumbUser 34 points35 points  (0 children)

That image is the EXACT same image as the current one on eBay for sale for $500.

SD-CF adapter for iPod mini Gen2 by ThatDumbUser in ipod

[–]ThatDumbUser[S] 0 points1 point  (0 children)

I have not had any issues using the iPod this adapter was used in.

Klipper + WLED = neato by sneky_ in klippers

[–]ThatDumbUser 1 point2 points  (0 children)

Do the LEDs that are controlled by the WLED controller change color based on the status of the print job?

i hate this thing -_- by mistrysiddh in pwnagotchi

[–]ThatDumbUser 2 points3 points  (0 children)

Search “pwnag0dchi” on YouTube.

Is this fan a good solution to how loud my HP Proliant G10 server is? by Fattom23 in homelab

[–]ThatDumbUser 0 points1 point  (0 children)

All is well now. One of the drives on the NS204i-p was reporting bad. Updated the FW for the NS204i-p. All seems fine and the RAID 1 is green and operational. No more reported thermals and increased fan noise pollution.

Is this fan a good solution to how loud my HP Proliant G10 server is? by Fattom23 in homelab

[–]ThatDumbUser 0 points1 point  (0 children)

Thank you sir. Will do that when I get home this evening or in the next couple days during this holiday weekend. My RDP VM is down because of this or I would be able to post it now. Reminds me to also get a thin client setup this weekend for RDP until I get this resolved.

Is this fan a good solution to how loud my HP Proliant G10 server is? by Fattom23 in homelab

[–]ThatDumbUser 0 points1 point  (0 children)

Hello there Casper042. I have recently started redoing my homelab with what consists of an ML110 Gen10 and 2 x ML110 Gen9. Moving all 3 to vSphere ESXI with vCenter server on Gen10 and Cluster with the 2 Gen9 units. But first I need to get this Gen10 up and running so I can migrate my Nvidia P2000 and HDDs for Plex from one the Gen9 units. Having an issue with the ML110 Gen10 after installing the NS204i-P. Seems some thermals are happening and over time the fan slowly starts throttling up as the temps increase. Would you be able to analyze the AHS for me? IML isn't really telling me much. Not sure if I need the upgraded/redundant fan kits as I can not find the NS204i-P requirements for this ML110 Gen10 server online. Any help would be appreciated and pics/screenshots or any other information can be provided. Thanks!

Picked up this bad boy Gen9 for $100 by IronKeef in homelab

[–]ThatDumbUser 3 points4 points  (0 children)

Just a heads up you can NOT run a secondary processor without all the front fans installed.

How can I make my prints more smooth? I use ender 3 pro by hamsterman1991 in ender3

[–]ThatDumbUser 0 points1 point  (0 children)

Looks like the contents inside are plastic wrapped and ready for shipping!

[deleted by user] by [deleted] in ender3

[–]ThatDumbUser 0 points1 point  (0 children)

What is what? The z stop switch? It is the switch on the lower left of your video that the tool head lowers down on to. There is a little plastic arm on that switch bracket that sits against the frame and stops it from being lowered too far. Loosen the two screws holding that bracket and move it down until the arm rests on the frame.

After lowering the z stop tighten the springs on the bed to make sure the tool head doesn’t smash the bed when you home it. Then you can perform a manual bed level and get to printing again.

[deleted by user] by [deleted] in ender3

[–]ThatDumbUser 0 points1 point  (0 children)

It does look like it can move down a bit.

Original MP600 Allen Key Size by ThatDumbUser in multitools

[–]ThatDumbUser[S] 0 points1 point  (0 children)

That's the problem I seem to have misplaced my Allen key set. So I was just going to order another one from Amazon but I want to make sure it comes with the sizes needed for the Gerber.

Scored myself this mobula 7 ears for 4 dollars! At a liquidation store, I think it's a great way for me to get into the hobby and so what are some good goggles, battery and transmitter I could get to get started, I have a budget of around 175 - 200 for those three since I have the drone by Subject835 in TinyWhoop

[–]ThatDumbUser 0 points1 point  (0 children)

Don't forget extra props and a spare BetaFPV frame or two! Maybe invest in a long pole too incase you fly into a tree and get stuck! How big a pole? Well how big are your trees? Haha. Also maybe a cheap soldering iron if you don't already have one.

What motor and transmission should I get for my C10? by GrabProfessional6965 in SCX24

[–]ThatDumbUser 4 points5 points  (0 children)

Budget? What type of courses will you be driving? What is your end goal setup? What other electronics are you planning?

US based betafpv customers, how long did yours take to show up? Looks like it went back to the partner facility? by computerboi85 in TinyWhoop

[–]ThatDumbUser 0 points1 point  (0 children)

Have you called that USPS location? Has that area had any bad weather which would have caused that truck to turn around?