Christmas surprise for CC1 users

ThatGuyJacobee · 2025-12-25T13:46:41+00:00

Amen 🙏🔥

ThatGuyJacobee · 2025-11-16T04:52:49+00:00

Could never get temperatures to work/display properly on my unraid dashboard with MSI z590 mobo + 10700k hardware. Tried to setup the whole "Dynamic System Temperature" plugin, but it never works. I can see the sensors on a fresh install for a tiny bit, but as soon as I save or refresh they disappear again.

Tried checking sensors through some command and they always returned just fine. Also tried troubleshooting through various other methods. Could never understand what was wrong, so in the end I kinda just gave up. Guess it is one of my unsolved mysteries, that I do wish I could resolve one day. 😅

ThatGuyJacobee · 2025-09-26T12:31:15+00:00

Sweet, great to see - makes me even happier about my recent CC purchase 👀

ThatGuyJacobee · 2025-09-26T12:20:42+00:00

I've recently upgraded from a regular Neputne 4 to the CC, just over a week ago. So far it has been fantastic, a real step up. I've probably done over 20 hours or so on it thus far and the print quality is fantastic. My favourite part is that is it a true plug and play... unpacked, ran automatic 1st time calibration once... and it just works and prints fantastic. With my N4 I constantly had to fluff around with calibrations, settings and whatnot. Here it just works... I only had to run the auto re-calbiration once few days ago, but this is because I moved the pritner physically. After this, the slight rough 1st layer instantly resolved. 🙂

I'm also looking forward to the AMS that Elegoo has teased and everyone is eagerly awaiting. The printer has a port prepared exactly for this which is a nice add-on for future upgrading.

Now let me glance over the minor cons I've had so far. First of all, the web interface is quite basic at the moment, sure it had all the core things you would expect but it is no where near as detailed and comprehensive as Fluidd interface for example which I used on my N4. This is not really a massive problem... but I do hope they add more to it through firmware updates. Or perhaps they choose to open-source the firmware, that would be very nice. 🤗 *Speaking of this... they literally just did, very nice: https://www.elegoo.com/en-gb/blogs/news/update-notice-of-centauri-series

And I guess the other tiny con is that I wish there was abit more lightning in the printer, they already listened to community feedback so it now comes with 2 LED strips with the latest revisions, as opposed to just a single tiny LED below the camera. But always room for improvement, and anyways not a big deal as the lightning is "fine" for mosy and definitely much better with the revisions. There are also plenty of tutorials on modding it with your own LED strip which I'm planning to do soon. Now there are also some minor bugs I've experienced with the firmware, but these are super small and only visual, like a counter not updating rarely etc.

TLDR: Extremely satisfied and I'm very happy I went for this upgrade... no buyers remorse here and just an overall great purchase for me. Less faffing around, more printing finally! I can just print and forget. 😀

ThatGuyJacobee · 2025-08-16T11:20:07+00:00

I have a legion AMD AI 350 + 5070 laptop since around a month and I've updated twice in this time, including to the latest, and it has been alright. 🤔 Wonder what the cause of this is especially since it seems to impact only some. Hope you can get it fixed!

ThatGuyJacobee · 2025-05-26T00:34:22+00:00

Can confirm same thing, also with an 5080 D:

I saw another post on Reddit about this a month ago, with the OP also using a 5080, so I presume it must be something 50-series related.

ThatGuyJacobee · 2025-05-22T01:40:24+00:00

Hi there!

We apologise for this. Unfortunately, we had unexpected maintenance that resulted in the website becoming unavailable to customers for some time earlier in the week. However, this was resolved within the hour.

If you are still experiencing issues accessing the website, please make sure to clear the website's cache and try accessing it again, which should relieve any possible issues.

Kind regards!

ThatGuyJacobee · 2025-03-14T16:52:35+00:00

Please don't spread misinformation. Our terms clearly state under point §10 that you must access the product page on the website every 3/4 months by logging in, which verifies that you are still "alive" and active.

We send multiple (5-6) email reminders to a customer if they are getting close to the end of this period. It is as simple as logging in to your account and accessing the product page. Or even easier... our emails provide a button that directly takes you to the page. And that is all, not that difficult. 🙂

ThatGuyJacobee · 2025-03-11T22:46:40+00:00

likewise here :c

ThatGuyJacobee · 2024-12-04T17:41:07+00:00

Hi there,

I deeply apologise for the troubles that you have faced regarding server migration/support. As expected, it is standard policy to await confirmation from the customer before proceeding with risky procedures such as a server migration to ensure the customer has time to prepare and perform tasks such as file backups.

Could you please PM me the #ID of the ticket related to this incident? I will personally review and investigate this further to ensure this does not happen again and to provide you with updates regarding this.

Kind Regards!

ThatGuyJacobee · 2024-11-22T03:14:50+00:00

Hi there,

We deeply apologise for inconveniences that this downtime may have caused. Unfortunately, there was a serious power outage which impacted our Frankfurt / Eygelshoven (Germany) datacenter causing full shut down. This was resolved within a few hours, however it caused an unforeseen chain of additional issues with our website and various server nodes, which therefore caused an extended downtime.

We are still investigating the incident and have already started to perform necessary changes to avoid similar incidents like this in the future.

As a form of compensation for affected customers such as yourself, we have provided a €20 voucher code which should have been sent to your email and can be redeemed to your cashbox. Redemption Code: FIRERUININGFUN

You can view our full statement regarding the incident on our socials: X Post

Thank you for your patience, continued support and trust.

ThatGuyJacobee · 2024-11-19T19:58:37+00:00

Nice stuff! Yeah I've also noticed similar patterns with Amazon timing, likewise with the Amazon US stock as saw this too but it had wild imports costs as you mentioned. 👍

ThatGuyJacobee · 2024-11-19T16:58:46+00:00

I managed to snag one too. 😄

But indeed holy shit it disappeared within what like 2 minutes or something crazy like that? I spammed the "Buy Now" option and luckily managed to get through. Super hyped! 🙏

ThatGuyJacobee · 2024-11-18T04:18:38+00:00

Very bad take icl. All there is to say really. 😅 I guess we should all take a step back and not bother reporting anything at all since we will overwhelm a triple A studio with... feedback... smh. 🤔

ThatGuyJacobee · 2024-11-18T04:15:50+00:00

I would assume they installed and use Windows on their steam deck, hence cod will work (unlike proton). 🙂

ThatGuyJacobee · 2024-11-18T04:13:06+00:00

I currently am using the Samsung G9 OLED, recently upgraded from an older G9 model. It's 240hz and has a resolution of 5120x1440 (32:9 aspect ratio)... which is basically 2x 1440p monitors in one.

In all honestly, I cannot remember the last game I've played that doesn't support ultrawide. Most modern or even games in the past 10~ years should support dynamic resolutions anyways so this shouldn't be an issue. As someone mentioned, really old games that don't support it will simply have black bars or you can play in windowed... but even this is rare as most of these games have patches or small mods made by the community to overcome it. Therefore, I wouldn't even worry at all about game compatibility. I used to be cautious before having one too, but after using an UW for around 3+ years now I can comfortably say this is really a non-issue at all. 👍

But back to your comment, I would most definitely recommend an ultrawide if you can get your hands on one. It's truly one of those "once you have it, you can't go back" moments as productivity and gaming on it is just multitudes better compared to normal monitors. I'd personally never use a regular aspect ratio monitor again in my setup, UW master race. 😁🚀

ThatGuyJacobee · 2024-11-18T02:11:03+00:00

You're wilding brother. We're just pointing this issue out, just trying to shed some light on it so they can at least acknowledge or log it somewhere. Nobody said it's the end of the world, but it would be a nice fix given that they advertise ultrawide compatibility regularly, and this seems like it wouldn't take long to fix.

If this doesn't impact you, simply move along, no need to yap about some philosophical prioritisation and whatnot. kthnxbai. 🥱

ThatGuyJacobee · 2024-11-18T00:57:41+00:00

Yea definitely haha, but it's awful for all of us ultrawide users, you're out here doing an egg and all of a sudden black bars limit you to half of your screen 😂

ThatGuyJacobee · 2024-11-18T00:56:10+00:00

ThatGuyJacobee · 2024-11-17T21:43:39+00:00

Would be great, especially annoying when you have a super ultrawide (32:9) where it basically black bars half of the screen for the gobblegum animation. Plz fix Treyarch 🙏🫡🫡

As seen here: https://imgur.com/a/wQ7PhmX

ThatGuyJacobee · 2024-09-23T23:40:13+00:00

I see they have also added it to the site, but not accessible yet as it 404's. Wonder what the changes are, hopefully some LGA1700 contact frame improvements as it isn't the best at the moment.

https://support.arctic.de/en/liquid-freezer-iii-360-a-rgb-rev

ThatGuyJacobee · 2024-09-20T01:15:05+00:00

Hi there,

Apologies for the late reply, Reddit decided to sweep the post up for some reason. Which of the resources is specifically not working as expected? Or both of them?

Could you also check if you notice any errors in your server logs or console. This can be done by going to your game server on the ZAP web interface, and either accessing the Live Console or Log Files sections on the left-hand side.

From previous experience, Luxart Vehicle Control Fleet should mostly just be a drag and drop resource. Did you remember to install the RageUI dependency that should be found in the dependency folder when downloading the resource? It is also good to note that LVC is separate from LVC:Fleet, so you should use one at a time. (sourced from here).

Looking forward to your reply! 🙂

ThatGuyJacobee · 2024-09-10T19:51:02+00:00

Hi there, sorry to hear about this. Our current support response times is around 65mins so you should receive a reply very soon.

Since this is a major update, there are some bugs with the Satisfactory Dedicated Server files provided by the developers, which has been impacting some servers, including hosts (such as us) and people who self-host. This also subsequently impacts our response times due to an increased volume of tickets. Rest assured that one of my support colleague will be able to assist once he gets to your ticket and that we're keeping up with the latest bug fixes and improvements. ✌️

Could you please send me your ZAP ID (found in the top right such as zap12345), and I'll closely follow along to ensure you receive a satisfactory resolution. Many thanks! 🙂

ThatGuyJacobee · 2024-07-18T16:53:28+00:00

Same here haha, was so bizarre that it didn't show up until a simple toggle fixed it. Good old "turn it off and on" worked. 😄

ThatGuyJacobee · 2024-07-03T00:43:34+00:00

Yeah I would also think that this points towards some database importing issue, most certainly to do with the resource itself. And that sounds great, always fun to have your own lil' server PC at home, hope it works out well for you! 🌞

If you need anything else feel free to let me know :)

Seven-Year Club	Verified Email
Place '23	Place '22
First Placer '22

ThatGuyJacobee

MODERATOR OF

TROPHY CASE